# # This is the main IBM HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See for detailed # information about the Apache directives. # # The instructions provided in this configuration file are only hints or # reminders. Consult the online docs for definitive information. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the web server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same web server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/u/user/local/web" will be interpreted by the # server as "/u/user/local/web/logs/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of IBM HTTP # Server, such as the number of concurrent requests it can handle or where # it can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/u/user/local/web" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #LockFile logs/accept.lock # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile logs/httpd.pid # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 10 ## ## Server-Pool Size Regulation (MPM specific) ## # worker MPM # # For tuning recommendations, refer to . # # ThreadLimit: maximum setting of ThreadsPerChild # ServerLimit: maximum setting of StartServers # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves ThreadLimit 25 ServerLimit 64 StartServers 1 MaxClients 600 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 # # Listen: Allows you to bind the web server to specific IP addresses # and/or ports, in addition to the default. See also the # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent the web server from accepting connections on all interfaces # (0.0.0.0) # # Change this to "Listen 0.0.0.0:port" to restrict the server to # IPv4. # #Listen 12.34.56.78:80 Listen 192.168.1.112:8093 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authz_user_module modules/mod_authz_user.so #LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule env_module modules/mod_env.so #LoadModule mime_magic_module modules/mod_mime_magic.so #LoadModule expires_module modules/mod_expires.so #LoadModule headers_module modules/mod_headers.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule mime_module modules/mod_mime.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule autoindex_module modules/mod_autoindex.so #LoadModule asis_module modules/mod_asis.so #LoadModule info_module modules/mod_info.so LoadModule cgi_module modules/mod_cgi.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so #LoadModule speling_module modules/mod_speling.so #LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so #LoadModule rewrite_module modules/mod_rewrite.so #LoadModule deflate_module modules/mod_deflate.so # # ExtendedStatus controls whether the web server will generate "full" # status information (ExtendedStatus On) or just basic information # (ExtendedStatus Off) when the server status page is formatted or # when IBM HTTP Server diagnostic modules report information. The # default is Off. # LoadModule status_module modules/mod_status.so ExtendedStatus On ### Section 2: 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # definition. These values also provide defaults for # any containers you may define later in the file. # # All of these directives may appear inside containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # ServerAdmin you@your.address # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If this is not set to valid DNS name for your host, server-generated # redirections will not work. See also the UseCanonicalName directive. # # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address anyway, and this will make # redirections work in a sensible way. # ServerName blablabla.blablabla.com:8093 # # UseCanonicalName: Determines how the web server constructs self- # referencing URLs and the SERVER_NAME and SERVER_PORT variables. # When set "Off", the web server will use the Hostname and Port supplied # by the client. When set "On", it will use the value of the ServerName # directive. # UseCanonicalName Off # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # #DocumentRoot "/u/user/local/web/htdocs" #DocumentRoot "/u/user/ptools/php/web" #DocumentRoot "/u/user/ptools/php-7.0.5/web" DocumentRoot "/u/user/upload" # # Each directory to which the web server has access can be configured # with respect to which services and features are allowed and/or disabled # in that directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # Options +Indexes AllowOverride None FileETag All -INode # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # # # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://publib.boulder.ibm.com/httpserv/manual70/mod/core.html#options # for more information. # Options FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all # # UserDir: The name of the directory that is appended onto a user's home # directory if a ~user request is received. # UserDir public_html # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only. # # # AllowOverride FileInfo AuthConfig Limit Indexes # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # # Order allow,deny # Allow from all # # # Order deny,allow # Deny from all # # # # DirectoryIndex: sets the file that the web server will serve if a # directory is requested. # # The index.html.var file (a type-map) is used to deliver content- # negotiated documents. The MultiViews Option can be used for the # same purpose, but it is much slower. # DirectoryIndex index.html index.html.var # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Order allow,deny Deny from all # # TypesConfig describes where the mime.types file (or equivalent) is # to be found. # TypesConfig conf/mime.types # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType None # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # MIMEMagicFile conf/magic # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # # EnableMMAP: Control whether memory-mapping is used to deliver # files (assuming that the underlying OS supports it). # The default is on; turn this off if you serve from NFS-mounted # filesystems. On some systems, turning it off (regardless of # filesystem) can improve performance; for details, please see # http://publib.boulder.ibm.com/httpserv/manual70/mod/core.html#enablemmap # # EnableMMAP off # # EnableSendfile: Control whether the sendfile kernel support is # used to deliver files (assuming that the OS supports it). # The default is on; turn this off if you serve from NFS-mounted # filesystems. Please see # http://publib.boulder.ibm.com/httpserv/manual70/mod/core.html#enablesendfile # EnableSendfile off # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log # # LogLevel: Control the number of messages logged to the error log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel debug # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a # container, they will be logged here. Contrariwise, if you *do* # define per- access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog logs/access_log combined # # If you would like to have agent and referer logfiles, uncomment the # following directives. # #CustomLog logs/referer_log referer #CustomLog logs/agent_log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog logs/access_log combined # # AddServerHeader # This directive provides a means to enable or disable ServerHeader values. # The default value is "On". This provides a server header according to the # values specified in the ServerTokens and ServerSignature directives. # Setting this directive to "Off" results in no server header information # being returned to clients. # Set to one of: On | Off # #AddServerHeader Off # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The built-in default is 'Full' which sends information about # the OS-type and compiled in modules. The recommended value is 'Prod' # which sends the least information. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Prod # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/". If the fakename is slash-terminated, then the # realname must also be slash terminated, and if the fakename omits the # trailing slash, the realname must also omit it. # # We include the /icons/ alias for FancyIndexed directory listings. If you # do not use FancyIndexing, you may comment this out. # Alias /icons/ "/u/user/local/web/icons/" Options MultiViews AllowOverride None Order allow,deny Allow from all # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/u/user/local/web/cgi-bin/" #ScriptAlias /php/ "/u/user/local/php-5.4.4/" #ScriptAlias /php/ "/u/user/local/php-7.0.5/" ScriptAlias /php/ "/u/user/miniconda/envs/php/" # # "/u/user/local/web/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # AllowOverride None Options None Order allow,deny Allow from all # # Redirect allows you to tell clients about documents which used to exist in # your server's namespace, but do not anymore. This allows you to tell the # clients where to look for the relocated document. # Example: # Redirect permanent /foo http://www.example.com/bar # # Directives controlling the display of server-generated directory listings. # # # IndexOptions: Controls the appearance of server-generated directory # listings. # IndexOptions FancyIndexing VersionSort # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. ReadmeName README.html HeaderName HEADER.html # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t # # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # AddEncoding x-compress Z AddEncoding x-gzip gz tgz # # AddType allows you to add to or override the MIME configuration # file mime.types for specific file types. # AddType application/x-tar .tgz AddType image/x-icon .ico AddType application/x-httpd-php .php # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi #AddHandler application/x-httpd-php .php # # For files that include their own HTTP headers: # #AddHandler send-as-is asis # # For server-parsed imagemap files: # #AddHandler imap-file map # # For type maps (negotiated resources): # #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # Action application/x-httpd-php "/php/bin/php-cgi" # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /u/user/local/web/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your IBM HTTP Server version number and your ServerAdmin email address # regardless of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/u/user/local/web/error/" # # # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en de es fr it nl sv # ForceLanguagePriority Prefer Fallback # # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # # The following directives modify normal HTTP response behavior to # handle known problems with browser implementations. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # The following directive disables redirects on non-GET requests for # a directory that does not include the trailing slash. This fixes a # problem with Microsoft WebFolders which does not appropriately handle # redirects for folders with DAV methods. # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully BrowserMatch "^gnome-vfs" redirect-carefully # # Allow server status reports generated by mod_status, # with the URL of http://servername/server-status # Change the ".example.com" to match your domain to enable. # SetHandler server-status Order deny,allow Deny from all # Add an "Allow from" directive to provide access to the server status page. # # Examples: # # 1. Allow any client with hostname *.example.com to view the page. # # Allow from .example.com # # 2. Allow the local machine to view the page using the loopback address. # # Allow from 127.0.0.1 # # 3. Allow any machine on the local network to view the page. # # Allow from 192.168.1 # # Allow remote server configuration reports, with the URL of # http://servername/server-info (requires that mod_info.c be loaded). # Change the ".example.com" to match your domain to enable. # # # SetHandler server-info # Order deny,allow # Deny from all # Allow from .example.com # # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # # #Enable the forward proxy server. Note: Do not use the ProxyRequests directive if #all you require is reverse proxy. # #ProxyRequests On # # # Order deny,allow # Deny from all # Allow from .example.com # # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # #ProxyVia On # # End of proxy directives. ### Section 3: Virtual Hosts # # VirtualHost: If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # #NameVirtualHost * # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. # # # ServerAdmin webmaster@dummy-host.example.com # DocumentRoot /www/docs/dummy-host.example.com # ServerName dummy-host.example.com # ErrorLog logs/dummy-host.example.com-error_log # CustomLog logs/dummy-host.example.com-access_log common # # Example SSL configuration which supports SSLv3 and TLSv1 # To enable this support: # 1) Create a key database with gskkyman # 2) Update the KeyFile directive below to point to that key database # 3) Uncomment the directives up through the end of the example # #LoadModule ibm_ssl_module modules/mod_ibm_ssl.so #Listen 443 # #SSLEnable # #KeyFile /u/user/local/web/ihsserverkey.kdb #SSLDisable # End of example SSL configuration # mod_charset_lite is used to translate request and response # data from one character set to another (e.g., from EBCDIC # to ASCII or vice versa). LoadModule charset_lite_module modules/mod_charset_lite.so #CharsetSourceEnc IBM-1047 #CharsetSourceEnc UTF-8 CharsetSourceEnc ISO8859-1 CharsetDefault ISO8859-1 # # Enable IBM HTTP Server diagnostic features. # # CoreDumpDirectory directory: Sets the location where the server will # attempt to put a core dump. The child processes running as 'User' # (see User config directive above) must have permission to write to # this directive. The filesystem will have to be large enough to hold # potentially large core files. # # The /tmp directory is often sufficient. # #CoreDumpDirectory /tmp # mod_mpmstats logs statistics about server activity to the main # error log. No records are written while the server is idle. LoadModule mpmstats_module modules/debug/mod_mpmstats.so # Write a record every 10 minutes (if server isn't idle). # Recommendation: Lower this interval to 60 seconds, which will # result in the error log growing faster but with more accurate # information about server load. ReportInterval 600 # Include details of active module in the statistics. TrackModules On # EnableExceptionHook allows modules such as mod_backtrace and # mod_whatkilledus to run after a crash and gather additional # diagnostic information. # EnableExceptionHook must be "on" in order to use mod_backtrace or # mod_whatkilledus. EnableExceptionHook On # mod_whatkilledus will record information about the current request # and connection to the error log at the time of a crash. This is # important information for diagnosing the cause of the crash. LoadModule whatkilledus_module modules/debug/mod_whatkilledus.so # mod_net_trace will record actual data sent/received from the client # and on proxy connections, even for SSL connections. Unlike an IP # trace, interaction with the platform network APIs can be seen. # The following example configuration can be activated by uncommenting # the LoadModule directive. #LoadModule net_trace_module modules/debug/mod_net_trace.so NetTraceFile /tmp/nettrace NetTrace client * dest file event senddata=65535 event recvdata=65535 # #RewriteEngine On #RewriteCond %{REQUEST_FILENAME} !-f #RewriteCond %{REQUEST_FILENAME} !-d #RewriteRule ^(.*)$ index.php?/$1 [L] # SetEnv CGI_HEADER_ENCODING EBCDIC SetEnv CGI_BODY_ENCODING NONE SetEnv _BPXK_AUTOCVT ON