B2B Supply Chain Integration

Dear Participants of the TRUfusion Enterprise User Meeting 2021,

Once again we would like to thank you for your participation during our TRUfusion Enterprise User Meeting.

As we mentioned during the meetings we are now offering the session recordings and the presentations in both languages for download.
Please find them attached.

What happens next?

You will soon receive a message about the release of the next TRUfusion Enterprise version: 7.9.4.0.

If you started a conversation during our future roadmaps sessions you are probably in touch with @Martyn Davies and/or @Thomas Fechner.

If something else comes to mind, you can post it here in the forum.

This way we may see other users agreeing to new posts or adding additional thoughts, which could make them even more valuable.

Thank you, looking forward to reading your posts!

Best regards,

------------------------------
Juergen Diedler
Rocket Software
------------------------------

English:

German:

Thank you very much for sharing these and for the presentations on the day.
The new user interface was great to see and, for ourselves, the interaction with the Windchill system was of particular interest.
It will be something I will discuss within our departmental meetings.
I may of missed it but does it allow the pulling of office type documents as well to create a package of CAD/PDF/TIFF/STEP etc?

Currently I would like to see some enhancement to the help documents. I seem to get either lost or not find a simple answer so its quickerto usually log call.
Maybe some "one off" blogs on certain subjects, personalizing the interface, etc.
As this is not my main system I support, but one of many used by Design, I tend to rely on a Rocket Engineer to upgrade, and usually have to leave them to it, so would like some update/upgrade detailed guides to help understand on how to do it and also, because for most managers money is better not spent, I have many hoops to jump through to get budget for an upgrade purchase.
These guides can also help with the updates to specific modules (e.g. Tomcat) which our internal network security people are constantly requesting.
Would like an import tool to batch create users (internal MAHLE ones)
One last item on TruFusion logons. It maybe already available but would like to point towards our Active Directory for authentication.

Thanks and once again Apologies to @Martyn Davies  for the microphone that decide not to unmute!

Dear Participants of the TRUfusion Enterprise User Meeting 2021,

Once again we would like to thank you for your participation during our TRUfusion Enterprise User Meeting.

As we mentioned during the meetings we are now offering the session recordings and the presentations in both languages for download.
Please find them attached.

What happens next?

You will soon receive a message about the release of the next TRUfusion Enterprise version: 7.9.4.0.

If you started a conversation during our future roadmaps sessions you are probably in touch with @Martyn Davies and/or @Thomas Fechner.

If something else comes to mind, you can post it here in the forum.

This way we may see other users agreeing to new posts or adding additional thoughts, which could make them even more valuable.

Thank you, looking forward to reading your posts!

Best regards,

------------------------------
Juergen Diedler
Rocket Software
------------------------------

English:

German:

1. TRUfusion Enterprise Windchill integration. A user is able to select office type documents as well to create a package of CAD files plus the usual office documents, PDFs and TIFFS. If you and your colleagues are interested we can show this to you.
2. Help documentation. This is useful feedback. I will work with our documentation team and see how we can make some improvements.
3. Tips and tricks. We would like to start to use this Forum for one off blogs/postings on whatever topics the user community would like. With the modernisation of the clients more personalisation will be possible.
4. Import tool to batch create users. We have a tool for this. I will liaise with @Thomas Fechner to see if he or one of his team make this available to you.
5. Active Directory. We do have a module for Active Directory integration. Again, I will liaise with @Thomas Fechner to get him or his team share more information on this with you. 

Thank you very much for sharing these and for the presentations on the day.
The new user interface was great to see and, for ourselves, the interaction with the Windchill system was of particular interest.
It will be something I will discuss within our departmental meetings.
I may of missed it but does it allow the pulling of office type documents as well to create a package of CAD/PDF/TIFF/STEP etc?

Currently I would like to see some enhancement to the help documents. I seem to get either lost or not find a simple answer so its quickerto usually log call.
Maybe some "one off" blogs on certain subjects, personalizing the interface, etc.
As this is not my main system I support, but one of many used by Design, I tend to rely on a Rocket Engineer to upgrade, and usually have to leave them to it, so would like some update/upgrade detailed guides to help understand on how to do it and also, because for most managers money is better not spent, I have many hoops to jump through to get budget for an upgrade purchase.
These guides can also help with the updates to specific modules (e.g. Tomcat) which our internal network security people are constantly requesting.
Would like an import tool to batch create users (internal MAHLE ones)
One last item on TruFusion logons. It maybe already available but would like to point towards our Active Directory for authentication.

Thanks and once again Apologies to @Martyn Davies  for the microphone that decide not to unmute!

Dear Participants of the TRUfusion Enterprise User Meeting 2021,

Once again we would like to thank you for your participation during our TRUfusion Enterprise User Meeting.

As we mentioned during the meetings we are now offering the session recordings and the presentations in both languages for download.
Please find them attached.

What happens next?

You will soon receive a message about the release of the next TRUfusion Enterprise version: 7.9.4.0.

If you started a conversation during our future roadmaps sessions you are probably in touch with @Martyn Davies and/or @Thomas Fechner.

If something else comes to mind, you can post it here in the forum.

This way we may see other users agreeing to new posts or adding additional thoughts, which could make them even more valuable.

Thank you, looking forward to reading your posts!

Best regards,

------------------------------
Juergen Diedler
Rocket Software
------------------------------

English:

German:

• Import tool to batch create users -> We have such a tool for internal use in migration projects. We can help you with a bulk import on a project basis.
• AD/LDAP integration for TFE -> We are offering a module to integration TFE with LDAP/AD for authencation. We do have also an enhanced TFE-LDAP module with which you can create/maintaine/de-activate user accounts based on AD/LDAP groups. This could actually also be a long term solution for you, to automate the user management in TFE. I'm happy to show this to you in a demo. Please contact me via email in case you are interested?

1. TRUfusion Enterprise Windchill integration. A user is able to select office type documents as well to create a package of CAD files plus the usual office documents, PDFs and TIFFS. If you and your colleagues are interested we can show this to you.
2. Help documentation. This is useful feedback. I will work with our documentation team and see how we can make some improvements.
3. Tips and tricks. We would like to start to use this Forum for one off blogs/postings on whatever topics the user community would like. With the modernisation of the clients more personalisation will be possible.
4. Import tool to batch create users. We have a tool for this. I will liaise with @Thomas Fechner to see if he or one of his team make this available to you.
5. Active Directory. We do have a module for Active Directory integration. Again, I will liaise with @Thomas Fechner to get him or his team share more information on this with you. 

Thank you very much for sharing these and for the presentations on the day.
The new user interface was great to see and, for ourselves, the interaction with the Windchill system was of particular interest.
It will be something I will discuss within our departmental meetings.
I may of missed it but does it allow the pulling of office type documents as well to create a package of CAD/PDF/TIFF/STEP etc?

Currently I would like to see some enhancement to the help documents. I seem to get either lost or not find a simple answer so its quickerto usually log call.
Maybe some "one off" blogs on certain subjects, personalizing the interface, etc.
As this is not my main system I support, but one of many used by Design, I tend to rely on a Rocket Engineer to upgrade, and usually have to leave them to it, so would like some update/upgrade detailed guides to help understand on how to do it and also, because for most managers money is better not spent, I have many hoops to jump through to get budget for an upgrade purchase.
These guides can also help with the updates to specific modules (e.g. Tomcat) which our internal network security people are constantly requesting.
Would like an import tool to batch create users (internal MAHLE ones)
One last item on TruFusion logons. It maybe already available but would like to point towards our Active Directory for authentication.

Thanks and once again Apologies to @Martyn Davies  for the microphone that decide not to unmute!

Dear Participants of the TRUfusion Enterprise User Meeting 2021,

Once again we would like to thank you for your participation during our TRUfusion Enterprise User Meeting.

As we mentioned during the meetings we are now offering the session recordings and the presentations in both languages for download.
Please find them attached.

What happens next?

You will soon receive a message about the release of the next TRUfusion Enterprise version: 7.9.4.0.

If you started a conversation during our future roadmaps sessions you are probably in touch with @Martyn Davies and/or @Thomas Fechner.

If something else comes to mind, you can post it here in the forum.

This way we may see other users agreeing to new posts or adding additional thoughts, which could make them even more valuable.

Thank you, looking forward to reading your posts!

Best regards,

------------------------------
Juergen Diedler
Rocket Software
------------------------------

English:

German:

• Import tool to batch create users -> We have such a tool for internal use in migration projects. We can help you with a bulk import on a project basis.
• AD/LDAP integration for TFE -> We are offering a module to integration TFE with LDAP/AD for authencation. We do have also an enhanced TFE-LDAP module with which you can create/maintaine/de-activate user accounts based on AD/LDAP groups. This could actually also be a long term solution for you, to automate the user management in TFE. I'm happy to show this to you in a demo. Please contact me via email in case you are interested?

1. TRUfusion Enterprise Windchill integration. A user is able to select office type documents as well to create a package of CAD files plus the usual office documents, PDFs and TIFFS. If you and your colleagues are interested we can show this to you.
2. Help documentation. This is useful feedback. I will work with our documentation team and see how we can make some improvements.
3. Tips and tricks. We would like to start to use this Forum for one off blogs/postings on whatever topics the user community would like. With the modernisation of the clients more personalisation will be possible.
4. Import tool to batch create users. We have a tool for this. I will liaise with @Thomas Fechner to see if he or one of his team make this available to you.
5. Active Directory. We do have a module for Active Directory integration. Again, I will liaise with @Thomas Fechner to get him or his team share more information on this with you. 

Thank you very much for sharing these and for the presentations on the day.
The new user interface was great to see and, for ourselves, the interaction with the Windchill system was of particular interest.
It will be something I will discuss within our departmental meetings.
I may of missed it but does it allow the pulling of office type documents as well to create a package of CAD/PDF/TIFF/STEP etc?

Currently I would like to see some enhancement to the help documents. I seem to get either lost or not find a simple answer so its quickerto usually log call.
Maybe some "one off" blogs on certain subjects, personalizing the interface, etc.
As this is not my main system I support, but one of many used by Design, I tend to rely on a Rocket Engineer to upgrade, and usually have to leave them to it, so would like some update/upgrade detailed guides to help understand on how to do it and also, because for most managers money is better not spent, I have many hoops to jump through to get budget for an upgrade purchase.
These guides can also help with the updates to specific modules (e.g. Tomcat) which our internal network security people are constantly requesting.
Would like an import tool to batch create users (internal MAHLE ones)
One last item on TruFusion logons. It maybe already available but would like to point towards our Active Directory for authentication.

Thanks and once again Apologies to @Martyn Davies  for the microphone that decide not to unmute!

Dear Participants of the TRUfusion Enterprise User Meeting 2021,

Once again we would like to thank you for your participation during our TRUfusion Enterprise User Meeting.

As we mentioned during the meetings we are now offering the session recordings and the presentations in both languages for download.
Please find them attached.

What happens next?

You will soon receive a message about the release of the next TRUfusion Enterprise version: 7.9.4.0.

If you started a conversation during our future roadmaps sessions you are probably in touch with @Martyn Davies and/or @Thomas Fechner.

If something else comes to mind, you can post it here in the forum.

This way we may see other users agreeing to new posts or adding additional thoughts, which could make them even more valuable.

Thank you, looking forward to reading your posts!

Best regards,

------------------------------
Juergen Diedler
Rocket Software
------------------------------

English:

German: