D3 and mvBase

 View Only
  • 1.  D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    Posted 07-14-2021 22:47
    I have been testing D3 V10.3.2 on a test server before moving on from D3 V9.2.2.

    All programs must be recompiled when moving to the new version. I have found an issue with the BASIC EXECUTE statement whereby programs using the old style of ,//IN.< would not compile, bombing out with an error instead. Changing the code to the new(ish) style fixed the problem. I have notified Rocket of the issue via our support provider and hopefully, there'll be a fix in D3 V10.3.4.

    ------------------------------
    Walter Kiess
    Manager IT
    Police Superannuation Board
    Adelaide SA Australia
    ------------------------------


  • 2.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    ROCKETEER
    Posted 07-16-2021 10:29
    Walter, what's the case number? I'd like to take a look.

    ------------------------------
    Brian S. Cram
    Principal Technical Support Engineer
    Rocket Software
    ------------------------------



  • 3.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    Posted 07-18-2021 18:37
    Brian,

    It is Jira Ticket# D3-68868.

    ------------------------------
    Walter Kiess
    Manager IT
    Police Superannuation Board
    Adelaide SA Australia
    ------------------------------



  • 4.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    ROCKETEER
    Posted 07-19-2021 09:05
    Oh, OK, If there's a Jira ticket, Engineering is already looking at it. Thanks.

    ------------------------------
    Brian S. Cram
    Principal Technical Support Engineer
    Rocket Software
    ------------------------------



  • 5.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    ROCKETEER
    Posted 07-20-2021 16:22
    Good news, Walter. This has been fixed and my extremely cool boss is going to cut a patch. What version of D3 are you using? WHICH CAD in the case will tell us. If you post WHICH CAD here, be sure to remove or obfuscate the D3 System ID.

    ------------------------------
    Brian S. Cram
    Principal Technical Support Engineer
    Rocket Software
    ------------------------------



  • 6.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    Posted 07-20-2021 19:20
    Hi Brian,

    See below:
     System Release Information
    ==========================
    D3 Release Version 10.3.2.WINDOWS rev 09/07/20

    Implementation. . . . . . WINDOWS
    Software Serial Number. .
    System ID Number . . . .
    Release . . . . . . . . . D3
    Windows Information . . . Windows;pick0;6.2.9200;;6.2

    Boot Monitor. . . . . . . 10.3.2.002; 09 Jul 2020
    Boot ABS. . . . . . . . . 10.3.2.A3; 09 Jul 2020
    Boot ABS Data File. . . . 10.3.2.A3; 09 Jul 2020
    System Data Files . . . . 10.3.2.D2; 09 Jul 2020
    FlashBASIC Revision . . . 10.3.F2; 09 Jul 2020
    SQL Revision. . . . . . . 10.3.S2; 09 Jul 2020

    Current ABS . . . . . . . 10.3.2.A3; 09 Jul 2020
    Current ABS Data File . . ;
    ABS Patch Level . . . . . no patches loaded



    Notice:
    ------
    No DATA ABS assigned to process


    ------------------------------
    Walter Kiess
    Manager IT
    Police Superannuation Board
    Adelaide SA Australia
    ------------------------------



  • 7.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    ROCKETEER
    Posted 07-21-2021 13:32
    Oops. That will require a service pack because it's D3 Windows and not Unix. I should have seen that earlier. As you suggest, it will be in some service pack in the future.

    ------------------------------
    Brian S. Cram
    Principal Technical Support Engineer
    Rocket Software
    ------------------------------



  • 8.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    ROCKETEER
    Posted 07-22-2021 12:37
    Well, Walter, apparently I was wrong ... again!

    This patch can be applied to your current 10.3.2 system via a T-LOAD. Interested? Or have you already fixed all of your code?

    ------------------------------
    Brian S. Cram
    Principal Technical Support Engineer
    Rocket Software
    ------------------------------



  • 9.  RE: D3 V10.3.2 and BASIC EXECUTE Statement with old syntax

    Posted 07-25-2021 23:03
    lol...Too late... :)

    ------------------------------
    Walter Kiess
    Manager IT
    Police Superannuation Board
    Adelaide SA Australia
    ------------------------------