Hello,
during installation of miniconda-zos-1.2-2020-10-01.run we get the following error:
Building the "base" Anaconda environment
Done.
---- installing extra_pkgs to the base env ----
conda-repo-cli-1.0.1+2.g39f4600-py_0.tar.bz2:
Downloading and Extracting Packages
*-None | | ########## | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
python: set_empty_channel 10: conda_install_extra_pkgs 14: run_setup 64: ./miniconda-zos-1.2-2020-10-01.run 391: cannot execute
Please help!
------------------------------
Andreas Mair
------------------------------
Page 1 / 1
Hello,
during installation of miniconda-zos-1.2-2020-10-01.run we get the following error:
Building the "base" Anaconda environment
Done.
---- installing extra_pkgs to the base env ----
conda-repo-cli-1.0.1+2.g39f4600-py_0.tar.bz2:
Downloading and Extracting Packages
*-None | | ########## | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
python: set_empty_channel 10: conda_install_extra_pkgs 14: run_setup 64: ./miniconda-zos-1.2-2020-10-01.run 391: cannot execute
Please help!
------------------------------
Andreas Mair
------------------------------
during installation of miniconda-zos-1.2-2020-10-01.run we get the following error:
Building the "base" Anaconda environment
Done.
---- installing extra_pkgs to the base env ----
conda-repo-cli-1.0.1+2.g39f4600-py_0.tar.bz2:
Downloading and Extracting Packages
*-None | | ########## | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
python: set_empty_channel 10: conda_install_extra_pkgs 14: run_setup 64: ./miniconda-zos-1.2-2020-10-01.run 391: cannot execute
Please help!
------------------------------
Andreas Mair
------------------------------
Can you add the output of 'env | sort' command here
Thanks
------------------------------
Alexander Klochkov
Rocket Software
------------------------------
Hello,
during installation of miniconda-zos-1.2-2020-10-01.run we get the following error:
Building the "base" Anaconda environment
Done.
---- installing extra_pkgs to the base env ----
conda-repo-cli-1.0.1+2.g39f4600-py_0.tar.bz2:
Downloading and Extracting Packages
*-None | | ########## | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
python: set_empty_channel 10: conda_install_extra_pkgs 14: run_setup 64: ./miniconda-zos-1.2-2020-10-01.run 391: cannot execute
Please help!
------------------------------
Andreas Mair
------------------------------
during installation of miniconda-zos-1.2-2020-10-01.run we get the following error:
Building the "base" Anaconda environment
Done.
---- installing extra_pkgs to the base env ----
conda-repo-cli-1.0.1+2.g39f4600-py_0.tar.bz2:
Downloading and Extracting Packages
*-None | | ########## | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
python: set_empty_channel 10: conda_install_extra_pkgs 14: run_setup 64: ./miniconda-zos-1.2-2020-10-01.run 391: cannot execute
Please help!
------------------------------
Andreas Mair
------------------------------
could you provide results of the following commands:
- get location of the python
type python - try to execute python
python --version - get file permissions for python binary
ls -la $(type -p python)
------------------------------
Mikhail Mikhail
Rocket Software
------------------------------
Hello Andreas,
Can you add the output of 'env | sort' command here
Thanks
------------------------------
Alexander Klochkov
Rocket Software
------------------------------
Can you add the output of 'env | sort' command here
Thanks
------------------------------
Alexander Klochkov
Rocket Software
------------------------------
my env vars are basically this:
EZATMAIL_CSSMTP_EXTWRTNAME=TCPIPXXX
HOME=/home/XXXXXXX
JAVA_HOME=/usr/lpp/java/J8.0_64
LANG=C
LIBPATH=/usr/lpp/internet/bin:/usr/lpp/internet/sbin:/usr/lpp/ldap/lib:/lib:/usr/lib:/opt/tectia/lib:/opt/rocket/perl/lib/5.22.0/os390/CORE
LOGNAME=XXXXXX
MAIL=/usr/mail/XXXXXXX
MANPATH=/usr/man/%L:/usr/local/man/%L:/opt/tectia/man/%L:/opt/rocket/perl/man
NLSPATH=/usr/lpp/ldap/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N:/usr/lpp/internet/%L/%N:/usr/lpp/ldap/lib/nls
PATH=/opt/rocket/bash/bin/:/opt/rocket/git/bin/:/usr/local/bin/:/opt/tectia/bin/:/usr/lpp/ldap/sbin:/bin:/usr/bin:/usr/local/bin:/opt/tectia/bin:/opt/bin:/usr/lpp/java/J8.0_64/bin
PERL5LIB=/opt/rocket/perl/lib
PS1=$LOGNAME at $SYSNAME $PWD $
SHELL=/bin/sh
SSH2_CLIENT=12.123.12.123 12345 123.12.1.12 22
SSH2_CLIENT_CIPHER=aes256-ctr
SSH2_CLIENT_COMPRESSION=none
SSH2_CLIENT_HOSTKEY_ALG=ssh-rsa
SSH2_CLIENT_LOGIN_METHOD=publickey
SSH2_CLIENT_VERSION=SSH-2.0-PuTTY_Release_0.69
SSH2_SFTP_LOG_FACILITY=-1
SSH_MVS_CONSOLE=YES
SSH_SFTP_DEBUG=*Mvs*=99
SSH_SFTP_DEBUG_FILE=/home/XXXXXXX/sft_debug.txt
SSH_SFT_PSEUDOVOLUME_VOLSERS=ARCHIV
STEPLIB=CURRENT
SYSNAME=XXX
SYSROOT=XXXXX
TERM=xterm
TZ=MEZ-1MESZ,086,268
USER=XXXXXXX
_=/bin/env
_BPXK_AUTOCVT=ON
_BPX_SHAREAS=NO
_BPX_SPAWN_SCRIPT=YES
_C89_CLIB_PREFIX=SYS1.CBC
_C89_INCDIRS=/usr/include
_C89_LIBDIRS=/lib /usr/lib
_C89_PLIB_PREFIX=SYS1.CEE
_C89_SLIB_PREFIX=SYS1
_C89_WORK_UNIT=SYSDA
_CC_CLIB_PREFIX=SYS1.CBC
_CC_INCDIRS=/usr/include
_CC_LIBDIRS=/lib /usr/lib
_CC_PLIB_PREFIX=SYS1.CEE
_CC_SLIB_PREFIX=SYS1
_CC_WORK_UNIT=SYSDA
_CEE_RUNOPTS=FILETAG(AUTOCVT,AUTOTAG) POSIX(ON) TRAP(ON,SPIE)
_CXX_CLIB_PREFIX=SYS1.CBC
_CXX_INCDIRS=/usr/include
_CXX_LIBDIRS=/lib /usr/lib
_CXX_PLIB_PREFIX=SYS1.CEE
_CXX_SLIB_PREFIX=SYS1
_CXX_WORK_UNIT=SYSDA
_UNIX03=YES
sendmail=/bin/sendmail
I had to anonymize some lines.
Kind regards,
Andreas
------------------------------
Andreas Mair
------------------------------
Hi, Andreas,
could you provide results of the following commands:
------------------------------
Mikhail Mikhail
Rocket Software
------------------------------
could you provide results of the following commands:
- get location of the python
type python - try to execute python
python --version - get file permissions for python binary
ls -la $(type -p python)
------------------------------
Mikhail Mikhail
Rocket Software
------------------------------
output of the commands:
$ type python
FSUM7422 python is not found
$ python --version
python: FSUM7351 not found
ls -la $(type -p python)
type: FSUM6241 Unknown option "-p"
type: Usage: type command ...
and here come all files and folders of my home directory...
Kind regads,
Andreas
------------------------------
Andreas Mair
------------------------------
Hello Mikhail,
output of the commands:
$ type python
FSUM7422 python is not found
$ python --version
python: FSUM7351 not found
ls -la $(type -p python)
type: FSUM6241 Unknown option "-p"
type: Usage: type command ...
and here come all files and folders of my home directory...
Kind regads,
Andreas
------------------------------
Andreas Mair
------------------------------
output of the commands:
$ type python
FSUM7422 python is not found
$ python --version
python: FSUM7351 not found
ls -la $(type -p python)
type: FSUM6241 Unknown option "-p"
type: Usage: type command ...
and here come all files and folders of my home directory...
Kind regads,
Andreas
------------------------------
Andreas Mair
------------------------------
thanks for details. I've found that _UNIX03 environment variable is the reason of the failure. Here https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.bpxa500/zusc.htm you can find that pax tool restores files with permissions 0666 modified by umask. I.e. python, bzip2, bash, etc. can't be executed until we set executable bits on them. I've modified the setup script that is part of miniconda installer and the fix will be applied to the new version of miniconda installer.
But still you can unset that environment variable at least temporarily to install miniconda.
------------------------------
Mikhail Mikhail
Rocket Software
------------------------------
Hi Andreas,
thanks for details. I've found that _UNIX03 environment variable is the reason of the failure. Here https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.bpxa500/zusc.htm you can find that pax tool restores files with permissions 0666 modified by umask. I.e. python, bzip2, bash, etc. can't be executed until we set executable bits on them. I've modified the setup script that is part of miniconda installer and the fix will be applied to the new version of miniconda installer.
But still you can unset that environment variable at least temporarily to install miniconda.
------------------------------
Mikhail Mikhail
Rocket Software
------------------------------
thanks for details. I've found that _UNIX03 environment variable is the reason of the failure. Here https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.bpxa500/zusc.htm you can find that pax tool restores files with permissions 0666 modified by umask. I.e. python, bzip2, bash, etc. can't be executed until we set executable bits on them. I've modified the setup script that is part of miniconda installer and the fix will be applied to the new version of miniconda installer.
But still you can unset that environment variable at least temporarily to install miniconda.
------------------------------
Mikhail Mikhail
Rocket Software
------------------------------
thank you very much for your help!
Removing _UNIX03 envvar helped a lot and I could install git now.
Kind regards,
Andreas
------------------------------
Andreas Mair
------------------------------
Sign up
Already have an account? Login
Welcome to the Rocket Forum!
Please log in or register:
Employee Login | Registration Member Login | RegistrationEnter your E-mail address. We'll send you an e-mail with instructions to reset your password.
77 4th Avenue
Waltham, MA 02451 USA
