MultiValue Tools

Good evening,Is there any plan to release a version for the VSCode extension MVBasic for Mac users that allow Online Editing? Thanks in advance… 

Hi, Does anyone have some advise on how to optimise / fine tune MVIS response times on APIs given some latency when using OAuth?When changing the Http Auth type from basic (or even digest) to OAuth, I find my the response times on APIs increases significantly (as expected due to the additional token validation using the JWKS URL).I have response times using basic auth +-50ms going up to +-500ms on Oauth. Any idea if there are ways to cache the tokens on MVIS or other ways to fine tune this? The only solution we have for now is to bump up connection pools to increase capacity which is not that sustainable as we add more APIs to the server going forward. I have also played around with increasing timeouts and other config parameters on server and account level to delay failures on load. Or maybe something to consider for future in MVIS?Im using AzureAD as the Oauth provider. 

Hi,I develop solutions using SB+ and there are some common variables which are imported into just about every BASIC program that I have. Some examples are;       $INCLUDE DMSKELCODE COMMON      $INCLUDE DMSKELCODE STANDARD.EQU Can someone please tell me why my "INCLUDES" configuration is not working? COMMON Variables such as RECORD, WORK, CNT, USERDATA() etc are not detected and I get Errors in VSCODE such as;"Referenced undefined variable: RECORD" Please see below a redacted version of my configuration. I believe the key parts of the configuration, namely the ACCOUNTS and INCLUDEMAPPINGS are configured correctly. { "version": "1.0", // If you want to connet to a U2 server, you

Hello,I would like to report an issue that we have seen with this recent update to 2.8.0 version. We use Online editing mode provided by Rocket MV Basic Extension to connect to our development server and make coding changes. After the update, it seems like the existing online editing mode connection is NOT working and is NOT able to detect .rmvonline folder of existing setup.I have to reset my online editing workspace and make a fresh configuration file (servers.mvbasic.json). After this it is able to connect and work properly. Could you please confirm if this is an expected behavior for people working in Online Editing mode to work as mentioned or if this is a known issue in version 2.8.0? If this is an issue, is there any other recommend workaround or possible fix anticipated?Thanks,Sunny Garg

we are experiencing some strange reactions in Accuterm like : In a Textbox, Multiline, enabled with word wrap.   In the projects properties we have chosen the button that says “ Same as Tab, except for multiline text or command button” on the “traits” tab.    When we use some of these fields (nearly most) when we use the “RETURN BUTTON”  the field did noy simply do a line return but closed the screen down The same type of field on the first screen works ok as expected Grid boxes have problems when using Combo Fields on the first column

We’re thrilled to announce the release of MV Performance Experience (MVX) 1.10.2.1582 on November 5, 2025, which is officially certified with UniVerse 14.2.1.This release is about making your experience smoother, faster, and more reliable.Email That Just WorksIf you’ve ever tried to send email from MVX and hit a wall, this update is for you. With 1.10.2, MVX now supports sending emails through registered SMTP configurations — and yes, that includes delivery to Outlook and Gmail. No more workarounds or wondering if your message made it through. It’s seamless, it’s reliable, and it’s built to keep your communications flowing.Smarter TroubleshootingWe know that when something goes wrong, you need answers fast. That’s why we’ve added DEBUG-level logging for email activity in both MVX and MVAdmin. Whether you're tracking down a delivery issue or just wa

We are looking at trying to enhance some of our VUE apps to be more reactive with the DB.  I was wondering if MVIS supported any webhooks for VUE applications.   We have build a nodejs server that will communicate with our D3 server and watch for changes and then our VUE app will await the webhook and update the application with the changes.  The proof of concept works but I really hate adding one more server, nodejs in the mix of things that could go wrong.   We are still using the Zumasys MultiValue Dashboard interface for all our web to D3 services. Craig------------------------------CRAIG CURTISSystem ProgrammerSevier Valley School DistrictRichfield UT US------------------------------

I have two bp file that both exist in Github: IO.BP and WEBAPPS.BP.  I have a subroutine in WEBAPPS.BP that I am updating in vscode.  It has this include statement “$INCLUDE IO.BP IO.INS”  vscode still shows all the variables using that file as undefined variables.  I have tried adding them to the includeMapping, but it still doesn’t fix it.  Both folders exist in c:\git-workspace\IO.BP and c:\git-workspace\WEBAPPS.BP.  This is for Universe. I also tried adding the folder to the workspace. How can I fix this in vscode?  

Greeting folks, I am loading the extension, setup the config as below; "db": {         // Hostname or IP address of U2 server.         // "host": "",         "host": "localhost",         // "host": "my.u2.server.local",         // "host": "192.0.2.1",         // Username used to log in over Telnet or UniRPC. Use an escape character for domain log-in. (\\\\ instead of \\)         "userName": "myusername",         // "userName": "DOMAIN1\\\\myuser",         // "userName": "myuser",

Using AccuTerm 8.1.1.1136 we are connecting to a windows 2022 server running OpenSSH server.  Connection works and we can log in but the AccuTerm escape sequences are hit and miss.For example we can issue the escape sequence to run on the caps lock without issue, but when running the escape sequence to turn off the caps lock nothing happens.  The sequences are “ESC:STX:L” for caps lock on and “ESC:STX:M” for caps lock off.I turned on data capture and can see the correct data getting sent for the caps lock on, but either nothing is sent or the wrong sequence is sent for the caps lock off.We can run “ESC:STX:?”, “ESC:STX:I” and get the correct responses.Trying to change the terminal size to 132 or 80 characters, “ESC:STX:E” and “ESC:STX:N” nothing will happen.We have tried running Bitvise instead of the Windows OpenSSH server and had similar results.Changes to terminal type, character set/code, SSH configurations and more have had no changes.

Greetings All,  I am running into an issue when using Accuterm. I just switched my internet provider to Startlink.  Startlink for home use does not have a dedicated IP address so I am using a GL.Inet GL-SFT1200 router that I have a  wireguard tunnel running on the router. I also I can log in direct from my PC using Surfshark with a -dedicated IP with no issues when connecting. When using wireguard I am able to connect but get an error message - "WED requires AccuTerm 2000 or later to run!  "  I am also trying to print to port 9100 to the wireguard but have not gotten far on this.  Am I missing something in the set up?  Thank you in advance. 

I understand that UV14.1 has a compatibility setting in uvconfig which allows it to support versions of SB+ before SB+6.5.0. Has anyone used this functionality and more specifically with SB+5.5/SB+5.4? If so, are there any things to be aware of? Thanks in advance

This is for a UNIVERSE environment. I've tried setting the account to use in servers.mvbasic.json, as it is using XDEMO by default at the moment which causes the authentication process to fail. I need to manually specify which account is used. Looking at the logs, it appears this is passed in during the "connect U2 start" stage as accountName, but both this and account seem to have no impact. Is this controllable? 

Enhancing Your Development Experience with New Features and Fixes in Rocket Software MV BASIC for VS Code 2.7.0 In the ever-evolving world of software development, staying ahead of the curve means continuously improving tools and workflows. We're excited to announce several new features and enhancements that will significantly boost your product

Hi, I can see online documentation refers to The EDA SQL Server driver supports SQL Server 2014 and greater. Is there a driver to support SQL Azure. Thanks------------------------------[Darren] [Johnson] [Australia][Snr Dev Engineer]------------------------------

Greetings, y'all! Is anyone aware of ERP/MRP systems available to the automotive aftermarket or performance auto parts? As always, thanks for your helpful replies... ~Doc------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

Hi sb users, I'll share a vsCode extension to edit Sbparagraph code.  Use a trigger on XXPROCESS to sync P type in a Directory.  Use sftp/sync to have it on the client Edit your code Use a ssh RUN program to sync back, copy into XXPROCESS, regen the process (like f2), run GC. It return ProblemMatcher info.  Capabilities : syntaxe coloris, all sb common vars, all SBExpression, all sbSubrs, Formater (indent), Hover, SignatureHelp. You can provide custom intellisensitems for Hover and Signature Help. I share all my expérience with pleasure.  Manu------------------------------Manu Fernandes------------------------------

Recently a survey was sent to MVIS customers asking to provide the following usage information: API request volume:- Average number of API requests per day:- Peak number of API requests per day:- Total number of API requests in the past 30 days: Data volume: - Average size of data per request (in KB or MB):- Total data transferred via API in the past 30 days (in GB): Usage patterns:- Typical hours of peak usage (e.g., 9 a.m. – 5 p.m. UTC): One customer logged a support case asking how they could extract the information from the MVIS logs. I believe that the following information can be extracted from the "Perfstats_PER_REQ.log" which is created if you enable performance monitoring in all versions of MVIS. API request volume:- Average number of API requests per day:- Peak number of API requests per

As I wrote in another thread I'm connecting to a database using a custom account. The account's path is: /u2/quiter/POSVENTA5 In that path I open a file, for example: /u2/quiter/POSVENTA5/BP/ACCSCR0 Then I try to click on another definition (ACCSCR0) to open it: * Carga datos IF HAY.AUTOFILL=1 THEN CODIGO.ED=XDATO * Lee registro CALL ACCSCR1(MAT XQ,MAT XXQ,XK,XMACRO,MAT XFIELD,XA,XV,XRESUL,MAT ENTR,XSTACK) END ELSE The editor then tries to open the file in /u2/quiter/POSVENTA5/ACCSCR1 instead of /u2/quiter/POSVENTA5/BP/ACCSCR1 so it fails. How can I fix the search path for the editor? Is there a way to do something like this: https://rocketsoftware.github.io/rocket-mvbasic/usage/Catalog/ for online editing? ------------------------------Héctor CortigueraQuiter Servicios Informatic

We're excited to announce the availability of the Rocket® MultiValue Developer Assistant. This AI-infused assistant enhances MV BASIC proficiency and developer productivity. See below for key features and requirements. For more details, read the Developer Assistant datasheet and register to gain access. The MultiValue Developer Assistant version 1.1.0.0, integrated within the VS Code® Integrated Development Environment (IDE), allows you to: Generate MV BASIC code via natural language queries. Autocomplete MV BASIC code. Explain MV BASIC code in natural language. Generate comments for existing MV BA

We just upgraded one of our Universe servers to 11.4.1 and i'm trying to set up the MVVS extension in Visual Studio Code to connect to remote Universe. I installed extension Rocket MV basic version 2.7.1 set up db.mvbasic.json with: "db:{       "host": "xxx.xxx.xxx.xxx",      "userName": "xxxxxx",       "password": "xxxxxx",       "account": "XDEMO",       "dataSource": "UNIVERSE",