ChangeMan® ZMF

Upgrading tomcat for using Rest/Event Service v8.3.2.We have been able to upgrade to tomcat version 11.0.25.  However, the tomcat server manager web page is displayed as binary (non-readable).Has anyone successfully upraded tomcat?

Saw this post from earlier this year where ChangeMan support was suddenly dropped for VS Code. As we are now at the end of September, is there any update on when the new plugin will be available for beta testing?

ZMF Explorer no longer available in the marketplace? What should we communicate to our developers?

Hello,Has anyone every encountered the issue that all works fine (zmf explorer, zlf cli) but that the git connector is no longer able to connect In the log it states  2026-08-13 08:50:46,246 debug: =======================> Git protocol helper for ZMF begins...2026-08-13 08:50:46,246 debug: ['git-remote-ZMF', 'origin', 'ZMF://<subsys>/<package>']2026-08-13 08:50:46,246 info: [URL] <subsys>/<package>2026-08-13 08:50:46,246 info: [SUBSYS] <subsys>2026-08-13 08:50:46,246 info: [PKGID] <package>2026-08-13 08:50:48,990 debug: [cmd] zowe zmf get ze --zmf-p <subsys>2026-08-13 08:50:48,991 debug: [out.utf8] 2026-08-13 08:50:48,991 debug: Command Error:Command failed due to improper syntaxUnknown group: zmfDid you mean: wf del aw?Command entered: "zmf get ze --zmf-p <subsys>"Use "zowe --help" to view groups, commands, and options. It’s like there is an issue with the configuration json, but I doublechecked and can’t find the issue and as stated

Yesterday we upgraded to ChangeMan ZMF 8.3.2 and today we get this error when we check in a component from VS Code:  Content error: Record Length(493) exceeds Maximum(80)I checked to make sure I have the correct zmfrest war file.

VS code updated to latest version and zmf explorer profiles disappears.vs code version 1.124.2 ZMF explorer 2.0.10I tried deleting zowe.config.json, zowe.schema.json, and extenders.json.   Restored backup of zowe.config.json and zowe.schema.json.I uninstalled zmf explorer and re-installed it.    I installed a previous version of visual studio code. Unfortunately, VS code auto updated.None of these corrected the issue.  

I have updated the file associations in the ibm open editor extension.   We have two custom  types which mapping incorrectly on the local folders.J01 becomes a suffix of JAVAP01 becomes a suffix of TXTHow can I correct this file mapping/associations?  

While using VSCode ZMF Explorer users may get message: Inactive token expired - Click the Profile RegenerateSession Tokens icon - ZMFREST Source: ZMF Explorer Is it possible to change the token expiration time? How? Thanks.#ChangeManZMF#ZMFExplorer

 I have encountered an issue while working with a component in my cloned package in VS Code. I recently made some changes to this component, and my colleague made other changes to the same component. As a result, I ran into a merge conflict when attempting to push my updates.After carefully resolving the merge conflict and committing the changes, I tried to push back to the mainframe. However, I received an error, and I am not sure where the problem lies. I have double checked to ensure there are no non-mainframe compatible characters in both the merged source and my commit message.Could someone please advise if there is something I am missing in the process, or if there could potentially be a bug in the git connector? Any guidance or troubleshooting tips would be greatly appreciated as I would like to get this resolved as soon as possible. 

Using zapp.yaml file in the IBM open editor to expand and retrieve copybooks. When package does not have any copybook in a staging dataset, the retrieval works successfully.  When a copybook exists in the staging dataset, the retrieve of copybooks fails.Click on source code in a ChangeMan package.  Select Yes. Select Yes.  From the log file, we debug on.[2026/06/01 14:28:51.462] [DEBUG] [extensionHostProcess.js:502] Getting token session - zmf_serzmfp[2026/06/01 14:28:51.464] [DEBUG] [extensionHostProcess.js:502] Allocated token - 887A13591D219BDF3DCA0E6060966351[2026/06/01 14:28:51.466] [DEBUG] [extensionHostProcess.js:502] CommonRest -createResource /component/source-include/nolocate?package=CH03000071&sourceComponent=CHGSECR1&SourceComponentType=SRC[2026/06/01 14:28:51.536] [DEBUG] [task_queues:103] Releasing token session - 887A13591D219BDF3DCA0E6060966351[2026/06/01 14:28:51.538] [DEBUG] [task_queues:103] Getting token session - zmf_serzmfp[2026/06/01 14:28:51.540] [DEBUG]

HelloWe have a strange issue on our VDIs with the Git connectorWe are still struggling to get the installation right. When we try to perform eg a git clone we ar getting a connection problem. We have setup the server using https, everything we do from the VDIthe zmfrest application the ZMF Explorerall works fine, except the git commandsI changed the server back to http and adapted the zowe config json to use http and then the git commands worked fineHowever other colleagues installed GIT_CLI and GitBash and then the git connector commands using https worked fineCan anybody shed some light on this, what am I missing on the pre requisites of the Git connector, hereby some (probably stupid) questionsdoes the Git connector need Git to be installed on the VDI if the ZMF Explorer uses https, why would the Git connector failAny feedback is welcomeBest regardsJohan

Recently we were notified that our systems team is planning to upgrade to z/OS 3.2.  We are currently on ChangeMan ZMF 8.3.  Due to resources we will not have time to upgrade before they plan on upgrading z/OS in August 2026.  I know 8.3 has not been tested and it is recommended to go to 8.3.1 but I am curious has anyone taken the chance and upgraded z/OS to 3.2 while still on 8.3?  If so, have you encountered any issues?  

Hi,We are currently running ChangeMan version 8.3.0 and are planning to upgrade our z/OS environment from version 2.5 to version 3.2.Could you please confirm whether ChangeMan V8.3.0 is compatible with z/OS 3.2?Additionally, if anyone has experience running ChangeMan V8.3.0 on z/OS 3.2, I would appreciate your guidance. Specifically, it would be helpful to understand any challenges encountered following the z/OS 3.2 upgrade and to know if any patches or updates are required for ChangeMan V8.3.0.Thank you in advance for your support.Best regards,Karthick

Hello,user has followed up the instructions at “HowTo: profile usage for ChangeMan ZMF plugin for zowe CLI and VSCode ZMF Explorer | Rocket Forum” Anyway he is getting the below messages: Is anything missing?RegardsManoel

HelloI’m looking for the page that was reachable in the past via https://www.microfocus.com/documentation/changeman-zmf/8-3/main-guides/user-guide/using-git-with-packages/index.htmlWhere is this info now?ThanksJohan

Occasionally, VSCode fails to correctly load extensions. When you then attempt to click on a ZMF Explorer icon you may get a message for example. "Refresh Command not found" etc This may sometimes occur when VSCode has performed one of its regular monthly updates. When this occurs: Shutdown VSCode,  Restart VSCode Click Help - Toggle Developer Tools  Then select Console from the top line menu barAttempt to open and run the extension.Check the console for errors. Often that can provide a good indication of what actually went wrong.#HowTo-BestPractice#ChangeManZMF

It would be nice if you could have a package filter in the favorite without having to drill down to packages under an application.

ZMF Explorer link to changeman zmf community page points to opentext site not rocket’s site

Hi ,  since January (2026) we started the preparation to implement Changeman ZMF 8.3.1.  Investigation was ongoing. By accident , when checking some info on your website mid February , we discovered that since February 10 th (2026)  version 8.3.2 is available.   Since we discovered this by accident , we were surprised.Is there a way we can be informed when a new version is available ?  (We are already subscribed to newsletters)Or is no communication done on this topic ?

Announcing the latest update for ChangeMan ZMF 8.3 Patch Update 2 (8.3.2)Rocket Software is pleased to announce a new release of ChangeMan ZMF, delivering a significant set of enhancements focused on modernization, resilience, usability, and deeper lifecycle automation. This release contains more than 50 enhancements, including over 20 driven directly by customer-submitted ideas through our Ideas portal.Below are some of the key highlight themes from this release:Enhanced Change Package Visibility & ControlsThis release introduces several improvements that streamline Change Package management and strengthen lifecycle governance. Enhancements include clearer visibility into unavailable package actions, additional requestor information across list/query/approve workflows, and expanded metadata passed to exits to support automation, auditing, and integration processes.Db2 Development ImprovementsWe’ve delivered several targeted updates that make Db2 change management smoother and more

Hi, we're actually running ChangeMan ZMF 8.3.0 and we're planning ChangeMan activities for next year. I've seen that ChangeMan 8.3.2 should be out in 2026 Q1 so I was searching informations about this version. Is there already a list of fixes and enhancements planned for 8.3.2? I would like also to ask where is the link for the ChangeMan ZMF versions / EOS dates matrix. Thank you. ------------------------------Stefano AntoniazziRaiffeisen Information Service------------------------------

Hello,We are in the process of automating a series of tasks in VS Code, in the tasks.json we defined a couple of tasks. Most of them are simple tasks, that can be executed by triggering a zowe command.Example : {         "label": "01 Clone ZMF package to local Git Repo",      "type": "shell",      "command": "git",      "args":[        "clone",        "ZMF://${input:zmfSubsys}/${input:zmfPackage}",        "C:/Users/${env:USERNAME}/.zmfGitrepo/${input:zmfPackage}"      ],      "problemMatcher": [],    },or     {         "label": "04 Audit ZMF Package",      "type": "shell",      "command": "zowe",      "args": [        "changemanzmf",        "audit",        "package",        "-p",        "${input:zmfPackage}",        "--zmf-p",        "${input:zmfSubsys}",        "--uv1",        "CAUD"      ],      "problemMatcher": [],    }, Now some of the tasks are more complex, where we need the execution of a REST API followed by data manipulations or multiple REST APIs to be executed to create a z

The documentation for the 8.3 release of both the ZMF and ZMF Client Pack products is now available in HTML. as well as PDF, format. The HTML-formatted documentation provides access to enhanced online search functionality that improves the user experience when accessing the relevant manuals online. Both the HTML and PDF documentation can be accessed on the ChangeMan ZMF 8.3 and ChangeMan ZMF Client Pack 8.3 documentation websites. #ChangeManZMF#SupportTip#SupportTips/KnowledgeDocs

There’s one day left in our virtual user group. Recordings from Days 1 and 2 are now available, and the final live session is coming up Thursday, Nov 20 at 11:00 a.m. EST. Day 1 — Thurs, Nov 6: Product Review & Roadmap Deep dive into ChangeMan ZMF 8.3 Patch 1 (8.3.1) enhancements and an exclusive preview of 8.3 Patch 2 (8.3.2), targeted for mid‑Q1 2026. Watch the recording. Day 2 — Thurs, Nov 13: Customer Spotlights Real-world experiences, challenges, successes, and practical insights from two customers. Watch the recording. Last day — Thurs, Nov 20 at 11:00 a.m. EST: Open Forum — The Future of ZMF An open discussion on evolving mainframe needs: Git integration, VS Code, DevOps, and more. Bring your questions and ideas to help shape the roadmap. Register here.Watch the recordings and join us for the live open forum next week— we’d love your input.Thanks for being part of the ChangeMan ZMF community — we look forward to hearing your thoughts and continuing the conversation.