Skip to main content

Issue is still the same...

  • March 22, 2011
  • 11 replies
  • 0 views
D

[Migrated content. Thread originally posted on 22 March 2011]

Hi Chris,

Thanks for respond. Just followed your suggestions and received the same messages:

os.init:
os.init.windows:
os.init.unix:
init:
init.New_Configuration:

build:
os.init:
os.init.windows:
os.init.unix:

init:
pre.build.cfg.New_Configuration:

os.init:
os.init.windows:
os.init.unix:

init:
cfg.New_Configuration:
[cobol]
[cobol] Compiling Program1.cbl...
[cobol] * Invalid filename
[cobol] Unable to open response file
[cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
[cobollink] Linking testproject.exe...
[cobollink] Micro Focus COBOL - CBLLINK utility
[cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
[cobollink]
[cobollink] ERROR: (1) Cannot open file : Program1.obj
[cobollink] ERROR: (6) No public symbols found. No object file generated
[cobollink] Link complete with errors
[cobollink]


BUILD FAILED
Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

Total time: 1 second

So I am still their. Do not know why I am getting message "* Invalid filename"?
If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
.obj and .exe files. May be I have to specify it somewhere like in NetExpress?

Thank you

    11 replies

    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Hi,

    Is there any chance you could post the files you have in your project - just the names if you want.

    It seems to me that something is incorrectly configured. It is as though the compiler is being asked to compile FILEAID.cbl and cannot find it. cbllink can then not find the object files because the compiler could not find the source file.

    Best wishes - AJ

    Dr Alexnander J Turner
    Software Systems Developer Senior Principal
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Hi,

    Is there any chance you could post the files you have in your project - just the names if you want.

    It seems to me that something is incorrectly configured. It is as though the compiler is being asked to compile FILEAID.cbl and cannot find it. cbllink can then not find the object files because the compiler could not find the source file.

    Best wishes - AJ

    Dr Alexnander J Turner
    Software Systems Developer Senior Principal
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Hi Alex,

    Thanks for reply.
    Unfortunately there is no option to attach file or place print screen.
    I created (as Chris advised) to create testproject with MF provided Program1.cbl
    Added Display statement and saved.
    This project located on my PC - C:\\@D_Drive\\Visual_2010\\testproject.
    Inside of testproject directory are: folder - New_Configuration.bin
    file - .cobolBuild
    file - .cobolProj
    file - .project
    file - Program1.cbl (source program)
    Here is the source after I added "Display" statement:

    program-id. Program1 as "Program1".

    environment division.
    configuration section.

    data division.
    working-storage section.

    procedure division.

    Display "I am here".

    goback.

    end program Program1.

    Obviously something causing not to create .obj file... Cannot find what

    Thank you
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Hi Alex,

    Thanks for reply.
    Unfortunately there is no option to attach file or place print screen.
    I created (as Chris advised) to create testproject with MF provided Program1.cbl
    Added Display statement and saved.
    This project located on my PC - C:\\@D_Drive\\Visual_2010\\testproject.
    Inside of testproject directory are: folder - New_Configuration.bin
    file - .cobolBuild
    file - .cobolProj
    file - .project
    file - Program1.cbl (source program)
    Here is the source after I added "Display" statement:

    program-id. Program1 as "Program1".

    environment division.
    configuration section.

    data division.
    working-storage section.

    procedure division.

    Display "I am here".

    goback.

    end program Program1.

    Obviously something causing not to create .obj file... Cannot find what

    Thank you
    Chris Glazier
    Forum|alt.badge.img+2

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Is this a folder on a mapped drive: PC - C:\\@D_Drive\\Visual_2010\\testproject.

    Can you please try to create a new workspace on your C drive as follows:

    In IDE select File->Switch Workspace->Other and create a simple workspace name like C:\\testvc and click OK.
    Eclipse will restart.

    Add a new project and new program as you did before.
    Does it build now?
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Alex,
    Thanks for reply.
    Here is what I did.
    Created new work space as C:\\@TestProject. Created new project - C:\\@TestProject\\TestProject.
    Created program inside of the project - Program1.cbl
    After build got the same errors:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking TestProject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@TestProject\\TestProject\\.cobolBuild:140: Build errors have occurred

    Total time: 0 seconds

    Do not know what is wrong with file name. Probably this reason effect creating .obj file

    Thanks
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Alex,
    Thanks for reply.
    Here is what I did.
    Created new work space as C:\\@TestProject. Created new project - C:\\@TestProject\\TestProject.
    Created program inside of the project - Program1.cbl
    After build got the same errors:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking TestProject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@TestProject\\TestProject\\.cobolBuild:140: Build errors have occurred

    Total time: 0 seconds

    Do not know what is wrong with file name. Probably this reason effect creating .obj file

    Thanks
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Alex,
    Thanks for reply.
    Here is what I did.
    Created new work space as C:\\@TestProject. Created new project - C:\\@TestProject\\TestProject.
    Created program inside of the project - Program1.cbl
    After build got the same errors:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking TestProject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@TestProject\\TestProject\\.cobolBuild:140: Build errors have occurred

    Total time: 0 seconds

    Do not know what is wrong with file name. Probably this reason effect creating .obj file

    Thanks
    Chris Glazier
    Forum|alt.badge.img+2

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    The problem is because of the @ character in the workspace name.
    Try it as C:\\TestProject instead of C:\\@TestProject and it will work fine.

    I believe that the @ character is being intepreted as a response file to the cobol and cbllink command as this is how they are specified.

    Example:

    cobol @respfile.rsp
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Chris,
    Thanks a lot. It worked.
    D

    [Migrated content. Thread originally posted on 22 March 2011]

    Hi Chris,

    Thanks for respond. Just followed your suggestions and received the same messages:

    os.init:
    os.init.windows:
    os.init.unix:
    init:
    init.New_Configuration:

    build:
    os.init:
    os.init.windows:
    os.init.unix:

    init:
    pre.build.cfg.New_Configuration:

    os.init:
    os.init.windows:
    os.init.unix:

    init:
    cfg.New_Configuration:
    [cobol]
    [cobol] Compiling Program1.cbl...
    [cobol] * Invalid filename
    [cobol] Unable to open response file
    [cobol] Compilation complete with 0 errors, 0 warnings, 0 notices and an exit code of 538,976,288
    [cobollink] Linking testproject.exe...
    [cobollink] Micro Focus COBOL - CBLLINK utility
    [cobollink] Version 1.2.0.156 Copyright (C) 1984-2010 Micro Focus (IP) Limited.
    [cobollink]
    [cobollink] ERROR: (1) Cannot open file : Program1.obj
    [cobollink] ERROR: (6) No public symbols found. No object file generated
    [cobollink] Link complete with errors
    [cobollink]


    BUILD FAILED
    Build finished with 1 errors, 0 warnings, 0 notices and a maximum exit code of 538,976,288

    C:\\@D_Drive\\Visual_2010\\testproject\\.cobolBuild:140: Build errors have occurred

    Total time: 1 second

    So I am still their. Do not know why I am getting message "* Invalid filename"?
    If I am running "Clean..." I am getteng message "BUILD SUCCESSFULL" but cannot see any
    .obj and .exe files. May be I have to specify it somewhere like in NetExpress?

    Thank you
    Chris,
    Thanks a lot. It worked.

    Recent badge winners

    Explore all badges
    Terms & ConditionsAccessibility statement