Rocket® ACUCOBOL®

I've reported this issue to Microfocus Supportline: After selecting a folder using "c$opensavebox" the runtime crashes without any error message.There are no errors when selecting a file.Up to and including version 10.0.1 this has worked. Does anyone know this problem? dkl#extend32-bitRuntime

Hi All, I'm trying to figure out how one determines the Windows task-bar location. I found that using an ACCEPT statement (like the one below), one can gather information about the user's desktop and determine whether the task-bar is vertical or horizontal. ACCEPT Terminal-Abilities FROM Terminal-Info It seems that this can be done by subtracting USABLE-SCREEN-WIDTH from PHYSICAL-SCREEN-WIDTH and if the result is greater than zero, then that means the task-bar is in a vertical position.   A similar test can be done with USABLE-SCREEN-HEIGHT and PHYSICAL-SCREEN-HEIGHT. But I'm having difficulty in determining what information is available to determine whether the task-bar is on the left or the right, and whether it's on the top or the bottom from the Terminal-Abilities information. How does one typically determine the position of the task bar on the client workstation using COBOL? Th

We are using version 6.10 That's in accept screen field

We are still not having any luck printing using acucobol 10.1.0.  We have gotten a new printer and downloaded the latest release/patch for 10.01.00.  I still cannot print anything from acucobol 10.1.  I have written a sample program calling win$print and I'm getting very different data into the winprint-buffer when selecting the same printer from 10.1 and 9.2.

Hello First to all, I must say: I´d never used OCX.    Now I´m fighting to add to my system a requirement wich let me offer a solution to a client. This requirement is : To update the status and location of some particular medicines (oncologic, VIH, etc)  in a web service ensuring the trazability by the serial number included in this medicines by a data matrix code. The web service comes from an organism called ANMAT (http://www.anmat.gov.ar/trazabilidad.asp)  who rules this, so, to sell or move a one of this medicines the client (Hospital, Pharmacy, Provider, etc) must update the status in.   I'm no prepared to create it from the beginning, so I found some supports who offers me an interface (with a cost I could pay) which work with an OCX to do this task and obtain a transaction number. They send m

[Migrated content. Thread originally posted on 16 May 2011]Hi, i write an xml using the c$xml API encoding it in "UTF-8".call "c$xml" using CXML-NEW-PARSER             giving wh-descr-parser.if we-runtime-major-version >= 8   call "C$XML" using CXML-SET-ENCODING                      wh-descr-parser                      "UTF-8"    end-if.It happens that when i write in it some accented character like "à", the final xml results in an invalid format and parsing it with "C$XML" CXML-PARSE-FILE returns CXML-PARSE-ERROR. Also, it is not possible to open the xml with a browser (chrome or firefox) as it says that the xml has a wrong format.i write the accented character with

Problem: Issuing the following command: acuthin.exe serverIP AcuToWebAlias returns the following error: "Connection failed. Unknown error." Where: AcuToWebAlias is an alias that runs correctly with AcuToWeb Resolution: Check if the license for AcuConnect Thin Client is installed and activated. AcuRCL service can be turned on just having an AcuToWeb license active: acurcl.wlcBut to use acuthin, an acurcl.alc file is necessary. We are working to include a specific error message for this situation, but that is not going to be available in the Acu 10.1.0. We plan to add this to a future release of the Acu product. Support Incident: 2990847

Hello, attached is a sample program designed in Acubench to help illustrate. What I'm trying to do is dynamically create a series of controls, and as the controls get created past the physical bottom of the screen, I'd like to add scroll to the window, so as to keep the window the same size, but allow for the user to scroll through the controls. How do I get my window to scroll as I'm creating these controls? Thanks Dave STRDOSE.zip

 I am searching code example to update and retrieved information on the calendar !!!! Thank you!

Just FYI.  Learning about routers, I ran across Dijkstra’s famous algorithm, and in researching it I found that the guy was a real COBOL hater. His words, circa 1975, were something like, “The use of COBOL cripples the mind; its teaching should, therefore, be regarded as a criminal offence.”  So naturally I had to write a program which would execute his algorithm in COBOL!! I drew on paper an ad hoc network of about 25 interconnected nodes, with a couple stubs, and transcribed the connections and associated costs into working storage. Took me two solid tries and some debugging, and sure it could be optimized, but was a fun and educational effort. The trickiest part was keeping track of the various subscripts of several tables. The way I did it, one table had two different subscripts in action at the same time.  Expression of satisfaction. I'm thinking of doing a spanning tree protocol example in COBOL next.

His there a way to call w$menu with the right click on the mouse!

I'm having trouble getting non-graphical .NET assemblies to work under AcuToWeb. CREATE statements that return a handle under normal circumstances return no handle under AcuToWeb. In fact, they seem to be ignored altogether, because changing the namespace to something non-existent, which would normally cause an error, has no effect. The syntax I'm using to create the control is: CREATE "@My.Assembly" NAMESPACE IS "My.Test.Namespace" CLASS-NAME IS "MyClass" HANDLE IS MY-NONGUI-HANDLE. I've also tried using the AcuToNet.dll interface, but got the CoCreate Instance Failed error. As I understand it, instantiating non-graphical .NET assemblies with CREATE is supported, so is there something I need to do differently to get it to work under AcuToWeb? Thanks. Claire

Problem: COBOL source code compiled under ACUCOBOL-GT 9.2 (or previous) allows START and READ NEXT of an empty file.The returned File Status was 10: End of file. (read next)  However when the same code is compiled under new version 10.0.0, the same logic is forced into the DECLARATIVES section with File Status 92. Resolution: This is a behavior change introduced in release 10.0.0 to fix an issue that was laying in the runtime for a long time. Here's the references to the change and a suggestion to set in the configuration file in case the old behavior is still requested after the update of the runtime. SUBJECT: DG ICOBOL file status change for READ when undefined recordChange Number: ECN-4330Type of Change: CorrectionIncidents: 2806405RPI Number: 1097532 Date: 2014-12-15Product: ACUCOBOL-GTModule: runtimeNew Version: 10.0.0 DESCRIPTION of problem

We are using WINPRINT-PRINT-BITMAP to send a image to the printer and print over the image Hies there a way to send a pdf file to the printer and then print on hit?

  I am looking for a report generator that is able to print graphics and distribute it to several clients like acubench

We use the 32-bit Chilkat ActiveX controls (http://www.chilkatsoft.com) for several functions in the 32-bit Windows runtime (currently on 9.2.2 ECN-4266).  One is doing file transfers (FTP, FTPS, and SFTP).  We have been using the FTP portion for a few years.  We have a new vendor that is using SFTP.  I can use the Chilkat control to successfully Connect, AuthenticatePw, and InitializeSftp.  After these steps for SFTP, I have to open a handle for the file on the remote server, then upload the file using the handle created by the open command.  I'm not getting the handle from the open to use for the upload. From the VB example (https://www.example-code.com/vb/sftp_uploadFile.asp):Dim handle As Stringhandle = sftp.OpenFile("hamlet.xml"

Problem: The ACUCOBOL-GT runtime may show a constant increase of occupied memory, regardless of the version in use. This may be seen easily in the ACU debugger and using the "u" command. Resolution: If only the "Windows" Memory item increases, a possible cause for this unusual memory allocation is the definition of a Layout Manager handle in the Working-Storage Section of the program. When a called program contains a line like this: 77 NW-HND-LM HANDLE OF LAYOUT-MANAGER LM-RESIZE. an amount of 36 bytes circa of memory is allocated every time the program is called. This can cause a great increase of used memory when the program is called recursively in a loop, even if the Layout Manager is not used by the program itself. To stop this process, either remove the definition of the unused handle or destroy the handle itself before leaving the program: DESTROY NW-HND-LM If the allocated memory will

Problem Is it possible to use Internet Protocol version 6 (IPv6) with AcuConnect Thin Client? Resolution Yes, this is possible starting with ACUCOBOL-GT version 10.0.0. These are the requirements to set on the Server side: - configure the Firewall to allow the dialogue between machines with IPv6- install AcuConnect Thin Client 10.x.x- turn on the variable AGS_USE_IPV6 in the configuration file for AcuRCL (acurcl.cfg)- start AcuRCL - verify the IPv6 address of the server, for example using the DOS tool "ipconfig"The output should be something like: Ethernet adapter XYZ: Connection-specific DNS Suffix . : domain-name Link-local IPv6 Address . . . . . : fe80::30e8:2ad5:8a5:c2ef

Hi, I'm seeing some odd behavior with C$OPENSAVEBOX and extend 10.1.0 on Windows 7. When I try to open a file using several different file types in opnsav-filters, the first file type displays (sort of), but the rest either don't appear at all or are filled with garbage characters. I've tested the same code under 9.2.5 as well, and it works fine. The filter I'm using is "Text files (*.txt)|*.txt|Cobol sources (*.cob)|*.cob|All files (*.*)|*.*" Under extend 9.2.5 it looks like this: Under 10.1.0 it looks like this (it varies):

Here is a snippet of the code, I can open the .dll, however when I try to run the ShellExecuteA is where I get the error, I found this string in the API Guide: Declare Function ShellExecute Lib "shell32.dll" Alias "ShellExecuteA" (ByVal hwnd As Long, ByVal lpOperation As String, ByVal lpFile As String, ByVal lpParameters As String, ByVal lpDirectory As String, ByVal nShowCmd As Long) As Long Here is what is in the wb-1-url            initialize wb-1-url.SSRS       MOVE "168.93.99.58/.../ReportViewer.aspSSRS  -         "x?/TEST REPORTS/TEST&rs:Command=Render&VendorNumberSSRS  -         "Start=001100&VendorNumberEnd=00UY7&rc:Parameters=CollapSSRS  -         "sed"S

Hi, Is there a way to test whether a floating window is minimized or maximized ? Thanks in advance.#ACUCOBOL8.1

I am trying to parse an XML file. I tried to follow the documentation on AcuXML, the XML2FD sets the file to binary sequential I made the changes to cobol config but when i read the file its not looking at the tags its looking like just a sequential stream of data. I am going to look at RMnet and XML Parse next. Any opinions on which is best for XML parsing and any help with AcuXML would be appreciated. Thanks in advance

call "win$printer" using winprint-setup-exinitialize winprint-selectioncall "win$printer" using winprint-get-current-info-ex winprint-selection giving call-fehler-num   return with 10.1.0 wrong return with 10.0.1 OK  

I am trying to print a form with a bitmap overlay using Win$Printer.  For compatibility reasons, I do not want to change the report layout.  When loading a font, W$font does not appear to allow you to use a decimal size, like you can in Microsoft Word.  Does anyone know how I could adjust the font size to 11.5?   Thanks in advance for any help.

Let's assume the following situation. On a web page on site A a cgi-script is started on server B which starts a cobol program named P1 passing parameters; program P1 calls a second program P2.The program P1, which has been two parameters "field1" and "field2", use a CGI form to have available "field1":01 Cgi-Form-P1 Is External-Form.       05 Field1 Pic X(10) Is Identified By "field1".and the statement: Accept Cgi-Form-P1Now, "field2" parameter should be used only by the P2 program.To achieve this I declare a structure as follows:01 Cgi-Form-P2 Is External-Form.