Rocket DevOps (for IBM i)

Then can I see the statistical report of LATNCY executed for each synchronized object?

The purpose of this post is to contain the "How to use Comboboxes with ODBC Service Calls" Knowledge Base article attachments.  Article is located here:   How-to-use-Comboboxes-with-ODBC-Service-Calls article------------------------------Michael DixAssociate Technical Support EngineerRocket Internal - All BrandsColumbia US------------------------------

Hello All My customer IBM i system has been in production mode for a bit more than 3 weeks now and whenever I run DMDSPLOG, I notice a million of accumulated number (since the first day of production mode) of the following iCluster message :             iCluster Event Log Additional Message Information                                                                                        Message ID . . . . . :   HAB1012       Severity . . . . . . :   30        Date sent  . . . . . :   27/02/24      Time sent  . . . . . :   17:12:06  Machine  . . . . . . :   <Primary Node Name>                                                                                                                  Message  . . . :   A BSF object was suspended with reason code RTV.   iCluster suspended a BSF object for group REP_IFS with backup node <Backuo Node Name>. Technical details: . . . .  The reason for suspension is RTV. The process type is OGRP. The job name is (228087/DMCLUSTER/REP_IFS).

Running Rel 10.2        Rocket DevOps core for IBM i I have a new table I am building that has a Foreign Key Constraint. I use CREATE OR REPLACE TABLE with an ALTER TABLE in the source file. I promoted the object to my QUA and tested it and realized I want to change the constraint, so I checked it out. made a field name change as well as change to the ALTER TABLE script to use the NEW Foreign Key...however when I promoted it it instead tried to apply the old constraint and did NOT apply the changes I made to the source. Error from promote: CMS2045 20  Recreate of constraint FK_SWRCQ_SWRCN_SWRCNID in library OPCAT259 failed.  The SQL code generated from            the object follows:                                                                       &nb

When attempting to install any of the Rocket MX engines on newer versions of RedHat Linux (8.9 & higher), you can, or will experience a permission denied error. The cause of this is RedHat and possibly other Linux variations have hardened their OS by setting a /tmp 'noexec' attribute. Since our installer uses the /tmp folder this prevents the .run file to execute the embedded .sh script(s). This will occur even if running the installer as root. There is a way to get around this as we make changes to our installer. You can run the below command from the folder where you have the .run file and the install should succeed. This will be resolved in our upcoming 10.4.3 release. mkdir tmp; ./<install_file>.run --target ./tmp examples: mkdir tmp; ./api-engine-setup.run --target ./tmp mkdir tmp; ./mx-web-engine-linux-setup.run --target ./tmp ------------------------------Patrick CarrollManager, Technical Support EngineeringRocket Internal - All BrandsAtlanta GA US---------------------

We've made some strides in the Installation/Upgrade of our newer Rocket DevOps portal (RDOp).  From the inclusion of more requisite packages to better message handling, the process has made it much easier to install or upgrade the portal on the IBM i or Linux. After the installation, there are a few 'admin' items that need to be addressed prior to getting the users in the pool.  While our guide calls them out here, I'm including a brief summary below with some screenshots to ease the process and get you on your feet. Best,  d ~~ After you've installed and started the RDOp subsystem jobs, you should be able to access the portal via a browser (e.g. Chrome, Edge...).  The default URL would be using your development LPAR (or Linux server for RDOe on Linux) with http://<dev_server>:8890/page/login. This section in the RDOp Installation Guide contains the default credentials (you'll be prompted to update on login) to access the portal for initial setup steps. After

Have you ever stopped to look at the jobs running in the iCluster subsystems and ever wondered what they are doing? Here's a breakdown of the jobs on the source and the target nodes, and a brief description of what they do. One of the most important jobs to monitor when starting iCluster is the DMCHATL job, it runs on both nodes, it's the TCP/IP listener job that ensures the nodes are communicating with each other. If we have any kinds of issues with replication, it's always good to look into the group jobs in the subsystems on both the source and target nodes. Check the data journal scrape job (HADDJS) on source and the data journal scrape receiver job (HADDJSR) on the target. Thanks.On Source node - iCluster jobs JOB FUNCTION  DESCRIPTION No. OF JOBS DMCHATL DMCHATL TCP/IP listening job 1 DMM00000MO DMCHAMO Monitor Information out 1 DMSXXXXXCI DMCHACI Control Information in many DMSXXXXXCO DMCHACO Control Information out many DMSXXXXXDI DMCHADI Data in many DMSXXXXXDO

Hello I read iCluster's help info (F1 key) in 5250 session and iCluster 9.1.0 User's Guide but could not find the answer to my question above.   Are there any parameters of DMSETSVAL that need a restart of the node or group?  Thanks. ------------------------------Satid SingkorapoomIBM i SMERocket Forum Shared Account------------------------------

Helllo We have IT security audit team asking a question on a user profile named ICA which belongs to iCluster product release 9.1.1 that is running in IBM i 7.4. This user profile has all high authorities in the system but it owns no objects and is never used at all. The question is what is this user ICA for (in other words when is it used) in iCluster environment?   The IT security team is aiming at deleting any user profile that is extraneous.  Is ICS an extraneous one? I know and can explain iCluster's users DMCLUSTER and ICLUSTER but have no idea on this ICA user. I hope any kind soul here would help provide the answer for me to convey to the IT security audit team. Tnanks. User Profile . . . . . . . . . . . . . . . :   ICA Previous sign-on . . . . . . . . . . . . . : Password verifications not valid . . . . . :   0 Status . . . . . . . . . . . . . . . . . . :   *ENABLED Date password last changed . . . . . . . . :   13/09/23  09:29:22 Password is *NONE  . . . . . . . . . . .

Hello I'm running iCluster 9.1.1 in IBM i 7.4 and have a need to change IP address used by iCluster in primary and backup nodes from a.b.c.9 to a.b.c.10 at primary and x.y.z.9 to x.y.z.10 at backup node.   I find that the instruction to change IP addresses in manual of iCluster 9.1.0 does not work but my Google search leads me to iCluster 9.2.0 instruction on how to do this change at  https://docs.rocketsoftware.com/bundle/icluster_ug_920/page/hft1701835840938.html  which provides new action steps and a new command DMCHGNODIP for use.  I follow the instruction and found it does not work.   I suspect that action steps for 9.1.1 may be different from 9.2. What I do is Log on to primary node and end all replication groups and  ENDSBS XDMCLUSTER in both nodes as instructed in the URL above Run DMCHGNODIP for Backup node first and there is a message that the Backup node must be active So, I restart XDMCLUSTER subsystem for both nodes back I then run  DMCHGNODIP for Backup node definition

Highlight: We generally recommend that the LMe/SS database be verified for every upgrade (Free of charge). The purpose of the Verification is to check your database for errors and supply you with the recommended SQL and best upgrade path. You may need two steps. The Rocket Community Knowledge Base provides instructions for saving and uploading your database.     How To Save ALSCCTL & AFFTCTL on the IBM i for Aldon Security Server and LMe Upgrade Verification and/or Troubleshooting Database Issues   Please sign on to Rocket Community and proceed as follows: https://my.rocketsoftware.com/RocketCommunity/RCLogin > Sign in > Cases (Tab) > Team Cases > Click on this case [00904107] > Scroll down on the right pane to find > Related Articles   Please alert us via support case when the upload is complete. And the verification will take up to 10 working days to complete.   Upgrade progress overview: ·       To upgrade from earlier versions, you must first upgrade to vers

Hi, I'm new to the forum and didn't find an answer to this while searching. I am using MX Web workbench 10.2.1. We have the column features enabled (show/hide, draggable, etc...) and we have an icon in our header that the user clicks when they want to work with those features.  Additionally, we've decided to allow users to open custom context menus when clicking in the grid. The idea is that wherever a user clicks the context menu opens. This works great except it opens when the headers are clicked...and also when that icon (considered a background image) is clicked as well. This causes our context menu to open over the one that is already integrated into the source function of the grid and hides part of the info. Working in Chrome with dev tools, the only ID I can find is the name of our grid (LIST) and then all the different classes assigned. The problem I'm running into by eliminating those classes from being clickable is that (and this is where I'm confused) they are dynamical

Hi folks, I hope your holiday plans are going well and are joyful.  So now that iCluster 9.2 is released, I am installing on our internal systems that I can share with you.  Below are the steps I am taking to upgrade our systems from 9.1.1 to 9.2.  (You can upgrade to 9.2 directly from iCluster 8.2 or higher)  Please refer to the install guide for your specific install steps but I thought it might be helpful to see this example upgrade for my environment.  I will not repeat all the install instructions that are provided here.  This is simply a sample upgrade procedure and you get to look 'over my shoulder' to see what I am up to.  Forgive me for switching back and forth between 'I', 'you', and 'we' in my writing.  No time for perfect grammar today.  Let's go!    Go to the Rocket web site and download the Rocket iCluster 9.2 install images.  Then visit the documentation web site and download all the docs you will need for iCluster 9.2.  (docs.rocketsoftware.com) To download the need

When deciding on how/when to upgrade your Rocket DevOps environment to the latest version, please refer to the following resources: Step 1: Check Compatibility You can find the compatibility charts for all our products at Rocket Community > Documents > Rocket DevOps IBM i OS Release Compatibility. Ensure the version you are upgrading to is supported by your IBM i OS version. Step 2: Download the Upgrade Materials You can download the latest software for upgrade from Rocket Community > Downloads > > DevOps core for IBM i> DevOps core for Enterprise> DevOps portal Step 3: Obtain Upgrade Documentation The steps to upgrade to the latest Rocket DevOps version can be found within Rocket Community > Documents > > DevOps core for IBM i > Rocket DevOps core for IBM i Installation Guide > Upgrade RDOi> DevOps core for Enterprise > Rocket DevOps core for Enterprise Installation and Upgrade Guide for IBM i Servers> DevOps portal &

If you are using RDOp, so the RDOUSR is a topic you could not get rid of. Before installing RDO, manually create the RDOUSR user profile, supplying a password that meets your security Requirements is necessary. The RDOUSR user profile, which owns the Rocket DevOps product, including RDOp, RDOe-api, RDOi-api, and RDOt. RDOUSR is used as a "back-end" user to perform these actions: ◦ schedule deployment ◦ schedule reports ◦ synchronize users from the RDOi/RDOe servers (for the Portal security feature) To enable the RDOUSR user profile to run the deployment or reports scheduler, authorize RDOUSR as a registered RDOe/ RDOi user. Registering RDOUSR does not consume an extra seat of the RDOe/ RDOi license. That means you could use RDOUSR to login RDOe GUI, run aldcs command, login RDOp and RDOi, and this user is free of charge. To authorize RDOUSR to view RDOe information in Rocket DevOps, register it as a named or concurrent RDOe user in Security Server. For RDOi, you have to grant Perfor

We have an iSeries application that will show an error message on the bottom of the screen if the item being selected has no additional information (instructions).   The success output currently looks fine: Date: Wed, 15 Nov 2023 22:58:31 GMTContent-Type: application/json;charset=utf-8Rocket-Status-Success: trueRocket-Status-ReturnCode: 0Content-Length: 48{"Result":{"instruction":"","RESULT":"SUCCESS"}} However, if it is not found, we would like to return a non-successful result and, ideally, the reason. I have tried using the Set Status Code action, but it seems to have no effect in the Execute Stage (or I am using it incorrectly). I would be happy to execute a Javascript function, but I don't see anything in hostSession or microflowContext that seems to have what I would need.  Is there documentation you could point me toward on hostSession and microflowContext, as well as other JavaScript capabilities?  I don't find references to them in the scripting documentation that I've foun

We are running version Rel 08.2B and I have a view that joins some 24/7 used tables to some new extended information tables and the view is used to populate a dashboard UI. There is no data being held, its a view and its a join view which is rarely used for any kind of file updates (except if you use instead of triggers which I am NOT). I can manually create this view using an SQL CLIENT ODBC connection without issue, but for some reason when I use ALDON to promote these types of views it always hangs up for some exclusive lock issue with at least 1 of the tables in the join. I don't understand why this is? Is it the way we have ALDON set up, can we fix this with a configuration setting?

Hi,I am new here, and I want to gain some knowledge on Rocket DevOps IBM i integration with Jira Cloud as there is no extension available for the Jira Cloud integration, so what are the other methods, Can we integrate it via Webhook? Rocket DevOps support Webhook?

Hi, I hope you all are doing well. I am new here and I have a concern regarding the integration of Rocket Devops with Jira Cloud, is there any one who has done this before and share some knowledge on it?

Hello I'm new to Aldon and need to download manuals of Life Cycle Manager IBM i Edition 8.6 to study.  I found only manuals for Rocket DevOps 10 on Rocket's web site.  Are manuals of LMi 8.6 still available for download? If so, I would appreciate any pointer to download URL.  Thanks. ------------------------------Satid SingkorapoomDataone Asia (Thailand) Company LimitedBangkok TH------------------------------

Hello My customer has a pre-production DRP test today. We switch iCluster Primary Node to DR site and cut DC-DR data link and they made some app transactions for an hour from 6-7 users. Then we restore DC-DR data link and I start DR to DC replication.  When I look at WRKCSMON screen at the Backup node and press F5 to refresh from time to time, I see additional information at the bottommost line of the screen below.   The percentage and the file name keep changing slowly as I keep pressing F5. It has been about an hour now and I see about 15 file names so far. Many times, the line is blank for sometimes before a new name appears.  It appears like a progress report but I would like to know how to interpret it.  Is it a progress of *SAVRST or *RBR or some other information?  This information does not appear in Primary node. Thanks.                                                                                                                                                              

Ok, here is what you need to do....1. Start by checking your product compatibility. You can check if the version of LMi/LMe you have are compatible with the Rocket Jira Plug-in using the Rocket Lifecycle Manager Products and Plug-in Compatibility chart at https://docs.rocketsoftware.com. If it is not, contact us to discuss upgrading options.2. Check with your internal Systems Administration team who are responsible for your JIRA Server and ensure you can install Plug-ins on your JIRA server instance.3. Install the Rocket Ops Portal. This is a prerequisite requirement for the JIRA Plug-in. Check compatibility with your other products (LMi/LMe) using the compatibility chart mentioned above. Download the Ops Portal installation files and documentation from your Rocket Customer Portal account. Configure the connection to LMi/LMe. Additional information on the Rocket Ops Portal can be found here.4. Install the Rocket JIRA plug-in onto your JIRA Server Instance using the Rocket Aldon Lifecyc

Good Day, I am trying to build some APIs using Legasuite but I am getting some unusual errors and I am seeking advice. The first is a simple API that displays different information based on the request. The API will var out the variables from the screen.I have recorded this API step by step and when I step through the API in Legasuite, it works perfect. However, when I run it as " live gateway test" I get the these errors interchangeably - Unexpected unidentified screen error or "java.lang.ArrayIndexOutOfBoundsException".    The second API works when ran as a "live gateway test" but it does not detect fields within the API to enter the data even though the screen is properly identified and the fields. It should be noted that it works when ran as the gateway test but only when deployed to the SIT environment doest his issue occurs and the API always fail.   It should be noted that these APIs are on the same connector and that there are other APIs with these APIs and those work perfect.

In terms of 'Journal Images' configuration as following screenshot, I have following queries: How Aldon defaults 'Journal Images' parameter when AS400 files/tables deployed to production?  If we use CHGJRNOBJ to change 'Journal Images' from *AFTER to *BOTH, is there any impact to the system? ------------------------------Nicolas Jin JinAIA Australia LimitedMelbourne VIC AU------------------------------

Hello In the past few days in the morning, I run Sync Check without checksum (always finished in about 5 minutes) and find one suspended object reported every time. When I look at the object, it's always the same table and I always activate it with *SAVRST and all appears to be fine.   But when I decide to look at spooled file of the Sync Check report, I see the following and am confused as to why there are 2 entries of the same file.   How do I interpret what is shown below?                                Attribute Difference Details                                                ---------------------------------------------------------------------------------------------------------             Path Name or     Source      Target      Object    Member/format/                             Group       Object           library     library     type      field name     Attribute                   --------------------------------------------------------------------------------------------