Uniface®

by Jonke Korzelius We have enhanced the latest versions of Uniface with the option to have Uniface format your ProcScript. With ProcScript code formatting, you can correct or improve your code indentation to increase readability and understanding. You can apply formatting on a selected portion of code using the Format Selection option or format the entire document using the Format Document option, both available from the Code Editor’s popup menu. You can change the shortcut keys for these menu options to your liking in the [USERKEYS] section of the usys.ini file. The default is Alt+F (Selection) and Alt+Shift+F (Document). Formatting rules Indent all code blocks, such as if, endif, while, endwhile, params, variables, etc. It does not indent block data, line continuation in strings, and JavaScript inside proc-script. The Undo (Ctrl+Z) action restores the code to the original state of the code before the formatting action. Code indentation is not currently applicable to the HTML

Hi Freaks Could it be that a program crach after using $ude?Or better: Yes it crash without any reason (just check in Uniface 9, but I observer this behavior also im UnifAce 10)I do have a simple form, which list all globale procedures.Then I use a button "Compile" which goes through the entry and compiles a procedure with      $1 = $ude("compile", "proc","%%ULABEL.UPRC%%%","library=%%UVAR.UPRC%%%")(I create a view UPRC to be compatible to Uniface 10)After the loop all looks okay, until the first call to a global procedure is executed.(This procedure is not related to they just compiled ones)Uniface try to call the procedure (can be seen in the proctracing) but crash immediately without any further informationIngo------------------------------Ingo StillerAareon Deutschland GmbH------------------------------

Hi FreaksWe want to upgrade from version UnifAce 10.4.2.0-018 to version UnifAce 10.4.2.0-049.in particular because of the  bug UNI-32008  in the grid : "Grid context menu no longer appears after right-click in Uniface 10"As this problem only affects a few customers and other customers don't "like" to install a new version every month, we are thing about to use UnifAce 10.4.2.0-049 in development.We advise the customers who use the grid to upgrade, the other customers can stay with UnifAce 10.4.9.0-18.Is this possible?i.e. can we deploy UnifAce forms compiled under 10.4.2.0-049 to customers still using 10.4.9.0-18?TIA for any comment :-)Ingo------------------------------Ingo StillerAareon Deutschland GmbH------------------------------

Patch 10.4.02-050 Downloads Product availability Matrix (PAM) Downloads of this patch are available from the Rocket Customer Support Portal. Further explanation can be found here. CurrenciesSupport for Sybase (SAP ASE) 16 on SUSE Linux 15.2+ (LU8).Update of library apache/xerces-c to version 3.2.5 for improved security.Update of library LibTIFF to version 4.6.0t for improved security.

When i Compile and test it gave me this error Error details : 300 URD_MW_ERROR Middleware : UV8Error# : -25Error Text : see UNIFACE message guide then  i  saw this message in  logfile Fatal error: 9024 - Application stopped due to logon error. ------------------------------Mohamed AhmdHamdRocket Forum Shared Account------------------------------

Hi Apologies if this has previously been asked. We are embarking on a move of our entire estate to Windows 11 and I was just wanting to get some views as to the smoothness of transitioning, particularly in relation to using the 10.303 IDE and not just the developed code. Did anyone find any problems/solutions they'd like to share or was it all just plain sailing? Cheers Brendan  ------------------------------Brendan LoughlinDevelopment ManagerUniversity Of EssexEssex GB------------------------------

------------------------------Mohamed AhmdHamdRocket Forum Shared Account------------------------------

When i Compile and test it gave me this error Error details : 300 URD_MW_ERROR Middleware : UV8Error# : -25Error Text : see UNIFACE message guide then  i  saw this message in  logfile Fatal error: 9024 - Application stopped due to logon error. ------------------------------Mohamed AhmdHamdRocket Forum Shared Account------------------------------

When i Compile and Test it gave me this error   300 URD_MW_ERROR Middleware : UV8Error# : -25Error Text : see UNIFACE message guide and when i see log files I saw this Message Fatal error: 9024 - Application stopped due to logon error------------------------------Mohamed AhmdHamdRocket Forum Shared Account------------------------------

Hello,does anyone know what happens, if two different clients "laptops" use the same username logging on to Anywhere?Are there different settings for this?How to avoid this? 2-step verification?------------------------------Roger WallinAbilita Oy------------------------------

I downloaded and installed uniface, registered on the website, received an email containing the Entitlement ID: 20a8c1c4-****-****-*****-************, however, at the end of the installation, when I go to activate the product the message appears: "Customer IDs do not match. Please contact Uniface support." ------------------------------Renato CurveloMrRocket Forum Shared Account------------------------------

Patch 10.4.02-049 Downloads Product availability Matrix (PAM)Downloads of this patch are available from the Rocket Customer Support Portal.Further explanation can be found here. New Feature(s) Uniface UX text field, number field, text area and select support a new property 'label-position' allowing you to specify if the label is positioned above, below, before or after the widget. The default is 'above'. Currencies OpenSSL upgraded from 1.1.1t to 1.1.1w Support for Microsoft SQL Server 2022 on Red Hat Linux 9 and Oracle Linux 9 (LIG) Fixes UNI-37474 Problems in production systems when the 'stmtcache:on' connector option is used for the Microsoft SQL Server or PostgreSQL database. UNI-37042 Popup Windows with relative positions may be rendered outside the screen's borders, making their content unreachable. UNI-37474  -  Problems in production systems when the 'stmtcache:on' connector option is used for the Microsoft SQL Server or PostgreSQL database.

by Dongbo Zhang We recently introduced a new feature in Uniface that empowers developers with enhanced pattern matching and validation capabilities: Regex String. On top of legacy Syntax Strings, Uniface now provides you with a new option of using regular expressions to define and validate patterns within your applications. What are Regex Strings in Uniface Regex Strings are regular expressions enclosed in forward slashes (/). They provide a flexible and robust way to specify patterns for validating user input, searching and comparing strings, and performing complex text manipulations. How to Use Regex Strings in Uniface Defining Field Syntax: You can use Regex Strings to specify the expected format of data in fields for Form and DSP (Dynamic Server Page) components. For example, to enforce a Canadian postal code format (B2Y 5K2), use the Regex String /[A-Z]d[A-Z] d[A-Z]d/. Pattern Matching in ProcScript: In ProcScript, leverage the $regex function to convert a string to a Regex Strin

Hi, When we use UPOPMAIL to send a mail on an Office365 account, the mail does not respect DKIM conditions : If the receiver applies DKIM condition, the mail sent by UPOPMAIL is spamed. Here is the code we use : newinstance "UPOPMAIL", hPopmail hPopmail->SetSecurity("SMTP=UStartTLSSMTPUSE=MAND", "")HPOPMAIL->SetSecurity("SMTP=UAuthLoginSMTPUSE=opt","USER=%%FROM.BIDON%%%PASSWORD=%%FROM_MDP.BIDON%%%") vSmtpServer = "smtp-mail.outlook.com+587"    hPopmail->LogonSmtp(vSmtpServer, "", "")If ($Status >= 0)    ; Specify the mail header information    hPopmail->SetFrom("%%FROM.BIDON%%%")    hPopmail->SetToList("%%TO.BIDON%%%")    hPopmail->SetSubject("Envoi depuis Uniface 10 - %%$$CODECLI")    ; Specify the message body    hPopmail->SetMessage("Ceci est un mail envoyé depuis smtp.office365.com", "")  ; plain text body    hPopmail->Send("IgnoreRcptError=True")EndIf We get a 0 $Status, the mail is correctly sent but DKIM informations are not OK. Should I send an ot

Hi Unifacers with U9/U10 we succesfully read and write Microsoft Excel cells using the (very old) DDE method; so basically we open a Microsoft Excel file, and while open in the background doing the following: $50 = "Excel" $51 = "c:\\temp\\filename.xls" $52 = "R1C1" perform "UDDEREQUEST" and we get succesfully in $53 the value of the cell is there a way to do the same with LibreOffice Calc instead of Microsoft Excel? I googled something and just found that I should replace my instructions like this: $50 = "soffice" $51 = "c:\\temp\\filename.xls"                 (or filename.ods) $52 = "nameofthesheet.C1" but it does not work.. anyone tryed to do something similar? or you left alone DDE and went to other methods like OLE or others? a working example would be great thank you Simone------------------------------Simone PeccheninoLabinf Sistemi Srl IT------------------------------

Hello, I used the "open" and "close" instruction to connect on differents databases, changing the PathName of the connector $MQL. However, I want to verify if the connection is done on the correct database after open a new one, even if the $Status = 0. (I have cases where I put something wrong in the pathname, and $Status=0 however) Is there a Uniface instruction which can give me the pathname actually used? Thanks------------------------------Jérémie CEDOLINProges PlusWillems FR------------------------------

Hi Unifacers, we can't figure why in SOME installation we have hundreds and hundreds of userver.log files in customer servers, created every day already tryed to add or remove putmesslogfile, add or remove ioprint, add ioprint=0.. if we specify a different putmesslogfile name in ASN we can see them correctly renamed but thet're still there.. if we don't specify a filename then we get those hundreds of userver (+ PID) .log anyone else/idea? thank you Simone------------------------------Simone PeccheninoLabinf Sistemi Srl IT------------------------------

Patch 10.4.02-048 Downloads Product availability Matrix (PAM) Downloads of this patch are available from the Rocket Customer Support Portal. Further explanation can be found here. New Feature(s)The $server_secret assignment setting is now also used to protect occurrence IDs that are passed between DSP client and server.Using the new $dsp_fieldlist assignment setting, DSP communication can be made to include all fields in the component's Field List. See the user documentation for more information.A new Entry format REX(Regex) is available when defining field format on forms and DSP's. The REX(Regex) with a particular regular expression pattern is used to format the data in the field.A new function for regular expression $regex is available for converting a string to a regex string. The regex string is a group of characters and regex codes enclosed in forward slash marks that can be used to match a string with a particular regex pattern. The $regex can be used in $ltrim, $rtr

HiI'm putting a short question here before addressing license management.I tried to update my "Uniface 10.4.02.021 Distribution". As the newest distribution complained about my license, I tried some older distributions.It looks that I'm able to update to "Uniface 10.4.02.024 Distribution", but after that it starts to complain about the license.Has someone else noticed this? Is this something that will often happen, ie. the license has to be updated within the same Uniface version (eg. 10.4.02) ? In our development environment we are using a local licence file, (On-premises standalone licensing) Regards RogerW.Error: Could not obtain a license.Reason: Your license does not allow you to run this version of Uniface.Resolution: Contact your Uniface sales representative to acquire an updated license.Checkout of license feature UW10;UWALL;UW32 failed, reason:License File: 210018 - No license code is available for feature UW10 ver 10.03.Fatal error: 8011 - A license could not be acquired for

Hello Uniface Community Is anyone have a feedback of  Uniface with a Database on Azure SQL managed instance ? Thanks for you help Daniel ------------------------------Daniel CaberoLead of IT R&D LideaLIDEA FranceMONDONVILLE FR------------------------------

I have found that signatures for components remain even after the component has been deleted.  I also, did not find a way to remove many signatures at once(except via sql). Is there an option or can this be added as a new feature? v10.04.01------------------------------Osman Shariff------------------------------

Patch 10.4.02-047 Downloads Product availability Matrix (PAM) Downloads of this patch are available from the Rocket Customer Support Portal. Further explanation can be found here. New Feature(s)The LM_REDUNDANT license option has been introduced. If you are using a pool of redundant RMS license servers and you are experiencing a delay of several seconds when Uniface is logging in to its licenses, then you can use this setting to have Uniface take of the login from Sentinel: determining which RMS server is the leader. This may help to reduce this delay significantly.The LM_TIMEOUT license option has been introduced. You can use it to set the Sentinel network timeout to the number of seconds that suits your needs. Sentinel has a default timeout of 30 seconds before it stops trying to reach an RMS server that can not be found, this can be too long. Also, when the LM_REDUNDANT license option is used in combination with a redundant RMS server pool, Uniface sets this timeout to t

Hi Freaks My challenge:In a non modal world I have to check on FormLoseFocus some conditions and  ask the user how to proceed.I.e stay in the instance or leave it to the clicked one. Under certain circumstances, data is also storedAs mentioned in the documentation, in a FRLF trigger the allowed statments  are limited, especialy a ask-message should not be presented to the userSo my idea is to send a message to the current(old) instance (and return with -1) which calls the ASYNC-trigger. In this I can call check routines and ask the user,But now I run into a problem:If the user say leave the current instance and go to the clicked (new) instance, which instance is this?Question:Is there any way to get (in FRLF) the instance,  which should get the focus next? BTW: For the good old version 9.7  I did a comlpex ping-pong coding to get such information and handle checks and stores on FRLFBut with 10,4 the sequnce was changed and I did not find a way to implement our needs ... Ingo-----------

Hi,isn't there a "Deployment Archive" anymore in Uniface10?Regards RogerW

by Etienne Thijsse Assignment files are how you configure your Uniface applications. However, currently assignment files are not very flexible. Often you need several assignment files that are almost identical, except for one or two settings. For example, two users on the same system that use the same application each need their own assignment file, if in the [files] section, the user’s home directory needs to be set. Or, if there are multiple versions of the application and the version number is part of the path to the Uniface archive files (.uar), then you also need a separate assignment file for each of these versions, even if this is the only difference.  Dynamic Assignment Files  To solve this profusion of almost identical assignment files, we have introduced the ability to use environment variables in the files, enabling assignment files to be more dynamic. The actual values of some of the settings are not hardcoded anymore but are derived from environment variabl