Uniface®

I am new to Uniface 10.  I don't see any forms in IDE. When I check the repository from the backend (Oracle), I see entries in OUFORM but there is no record in UFORM. How can I correct this so I make changes to some forms? Thanks. ------------------------------Anthony ZhongRocket Forum Shared Account------------------------------

While it is relatively easy to do something like this activate "Windows".CommandOut("cmd /c echo Hello World!", $1)   and it is also possible to run a Powershell script with something like this activate "Windows".Command( "cmd /c start /wait /b /min %%"%%" powershell -ExecutionPolicy Bypass -Command %%"Write-Output (Hello World)%%" | Out-File temp.txt " ) I have been unable to find a way to use CommandOut to capture Powershell output. Has anybody else encountered and resolved this issue? I have tried Write-Host, Write-Output and a few other variations but it does not appear that Powershell output goes where CommandOut can access it.------------------------------Harjit BatraIT DirectorRocket Forum Shared Account------------------------------

I am new to Uniface 10.  I don't see any forms in IDE. When I check the repository from the backend (Oracle), I see entries in OUFORM but there is no record in UFORM. How can I correct this so I make changes to some forms? Thanks. ------------------------------Anthony ZhongRocket Forum Shared Account------------------------------

I am in the process of upgrading to Uniface version 10.4.02 (patch 031) and now have a working IDE. When I launch the IDE, a message saying "UHTTP: Negative return status: -12" shows in the Messages tab on the start page. Also, the middle of the start page screen shows "No connection". Everything else functions fine.  Was there something I missed or did incorrectly? Thank you.------------------------------Jim MitchellState of Oregon, DCBSSalem OR US------------------------------

I have an elementid from another piece of javascript, and I'd like to get the relevant field object (technically I'd like to get the relevant occurrence in order to get another field in the same occurrence but never mind that).  So I can get passed in a string with "ufld:FIELD.ENT.MODEL:INST.3". So far (since it's one field I'm doing this for), the best bet I have got is looping through uniface.getInstance("INST").getEntity("ENT.MODEL").getOccurrence(loopcnt).getField("FIELD").getBoundElement().idand comparing the result to the string passed in to get a match.  Is there a better way to get to the uniface field object from the element ID as a string? Regards,  Iain------------------------------Iain SharpHead of Technical ServicesPci Systems LtdSheffield GB------------------------------

Patch 10.4.02-034 Downloads Product availability Matrix (PAM) Downloads of this patch are available from the Rocket Customer Support Portal. Further explanation can be found here. New Feature(s)Elliptic Curve Cryptography is now supported in $encode and $decode functions, with three schemes: ECIES, ECDSA and Ed25519.Uniface supports a new algorithm in functions $encode and $decode: Base64URL, which makes URL encoding simpler and more efficient. FixesUNI-35051IDE Resource Browser: menu with insert into Structure option to add fields to an entity does not appear UNI-35051  -  IDE Resource Browser: menu with insert into Structure option to add fields to an entity does not appear Solution available in patch(es):      10.4.02-034 Description:IDE Resource Browser: menu with insert into Structure option to add fields to an entity does not appear since patch 104.02.028. Environment:+Uniface Version  : 10.4.02.028+Operating System : O

Hello everybody,   I'm facing the challenge to replace (periodically) unicode characters from UTF8-coded files into useful ascii characters in order to store them in an ISO database.   My first idea was working with a database translation table.  But a large DBTT results in poor performance. Additionally I faced the problem that I should use a "W" packingcode and this doesn't work with DBTT.   So we decided to do the replace "manually" at runtime with a "small" uniface proc after getting a $procerror -300 from a validatefield.   I assume one or two of you has had the same problem before and could successful solve it. Does anybody of you have a (ready and proven) translation file or script for this purpose and would like to share it with us? I've searched a lot the web but couldn't find anything helpful for me.    Best regards and looking forward to a reply. Thanks in advance. ------------------------------Michael RöschAbrechnungszentrum Emmendingen------------------------------

Patch 10.4.02-033 Downloads Product availability Matrix (PAM) Downloads of this patch are available from the Rocket Customer Support Portal. Further explanation can be found here. New Feature(s)New keyboard shortcuts for the Compile, Compile and Test, and Test functions on Main Development Objects. You can access these shortcuts using Ctrl+F7, Ctrl+Shift+F7, and Ctrl+F5. Note: The edist will add the relevant [userkeys] section to your usys.ini file during installation/upgrade. However, if you overlay using the patch zip file, you will need to update your usys.ini manually by adding the following lines to it: [userkeys] build.compile=Ctrl+F7 build.compile.test=Ctrl+Shift+F7 build.test=Ctrl+F5 CurrenciesThe Scintilla version, Uniface code editors use, has been updated to version 5.3.6 for improved operational security. FixesUNI-34152When the Delete Trigger activates a collection operation on the current collection, it incorrectly activates on a different occurrence. UNI-

HiI'll do a more thorough report about this to Uniface as I get more info.Now just a quick question here, if anyone recognises this problem.Using Uniface 10.4.02.021some of our customers get this error-message The program files are installed on a server but are processed on the client pc. Some of the clients are able to process the program as some can't, ie. they get the above error-message. It seems that the program is correctly installed and the mappings are ok. Now I know that it's working on Windows10 but not on Windows11, but this has been assumed from a very few clients. Regards RogerW.------------------------------Roger WallinAbilita Oy------------------------------

Hi all,  We are having some issues with carriage returns (CR) on a text that is later sent via HL7 through an integration engine. The issue is that the HL7 understands the CR as something that breaks the segment and then the message fails. So, we want to get rid of those CRs replacing them with something more appropriate that can be managed by HL7. The problem we are having is how to identify those CR? We already have some code that replaces some 'dangerous' characters with other more appropriate ones, for example, (&, ^, \\, |,….) are replaced with (\\T\\, \\S\\, \\E\\, \\F\\,….). For that, we go through the text using the function 'scan' to find the character to replace, but we don't know how finding these CRs. The application we have is built on Uniface 9.7.05 The field where the CRs are is a Text type field with: Widget type --> MessageBox, DataType --> String, Interface --> C500 Syntax --> MUL Any ideas will be welcome! Thanks and regards! ----------------------

by Anastasios Chatziioannou Accessibility is a topic that is often overlooked, as it affects a small percentage of an average product's users. There are, however, numerous benefits to improving an application's accessibility. Easily accessible applications can reach a wider range of users, enhancing the application's inclusivity and reach. Visual ability, something that can change as we age, drives us to accommodate all users. Aside from the ethical side of accessibility, there are also compliance issues on the legal side, as both European and US digital accessibility standards become stricter. The Uniface lab has been working extensively on improving accessibility for all Uniface desktop applications. The lab has two primary areas of focus: assisting users with compliance with the WCAG 2.0 web standards (as in DSPs) and exposing the desktop applications to screen readers. In this blog, we will focus on the latter. Uniface exposes the UI (User Interface) of generated Windows desktop

Patch 10.4.02-032 Downloads Product availability Matrix (PAM)Downloads of this patch are available from the Rocket Customer Support Portal.Further explanation can be found here. New Feature(s) The [userkeys] section in your .ini file now allows you to define also combinations with PgUp and PgDn keys, like e.g. Ctrl+PgDn. Assignment files can now be simplified by using logical and environment variables in your asn settings.See the Uniface documentation for more information on how to use assignment file expressions. Keyboard shortcut Alt+D sets focus to the main U-Bar allowing you to open another object without the need for mouse clicks.Note:Installation using the edist will add a [userkeys] section to your usys.ini file. If you overlay using the patch zip file, you need to manually add to your usys.ini:[userkeys]nav.ubar=Alt+D Keyboard shortcut Ctrl+Tab shows the next open Editor tab in the IDE without the need for mouse clicks, whereas Ctrl+Shift+Tab shows the previo

Hello all, does anyone has a working signature for the EXCEL WORKBOOK->SAVEAS function? I tryed to reduce to only 2 Params, filename (string) and fileformat (numeric) but allways get the following error :    S:0 P:0 F:OEXCEL / _ALIAS00000002 E: F: --> (); SHEET_SAVEAS; 2; [0];  $WORKBOOK$->SAVEAS(P_FILENAME,"51")   ICCDRV-COM-ERR Error with ICC system occurred, COM method has conflicting or illegal signature in its type library: Illegal optional argument placement   S:-1 P:-56 F:OEXCEL / _ALIAS00000002 E: F: --> (); SHEET_SAVEAS; 3; [-56]; if ($status != 0) Kind regards Norbert------------------------------Norbert LauterbachInfraserv Gmbh & Co. Höchst KgFrankfurt DE------------------------------

Hi all, do you also have a problem connecting to the community site? In the last time I mostly get this error : While writing this text I got about 10 times this message : Kind regards Norbert------------------------------Norbert LauterbachInfraserv Gmbh & Co. Höchst KgFrankfurt DE------------------------------

Hi Anyone else faced the next issue ? And found a solution to it?Since we moved our Uniface IDE to Azure VDI it is slower (and thus much less user-friendly). Other programs like IntellJ or SqlDbx aren't impacted negatively by this VDI migration. Our Uniface version is the next: Release:  10.3.02Update:   10.3.02.037 (037 0730_1)Platform: W10Date:     July 30, 2020 Cheers------------------------------Didier------------------------------

We use uniface 9.6.05. Does uniface support TLS 1.1 or TLS 1.2------------------------------Guus von MorgenApplicatie beheerder medische systemenMinisterie van DefensieUtrecht NL------------------------------

Hey all, Some joker turned on the permissions system without defining any users / roles. Does anyone know how to turn it off by deleting a record in UOBJ (that's where I'm guessing this info is stored)? Regards, Knut ------------------------------Knut Dybendahl------------------------------

By Jasper de Keijzer Introduction Welcome to the first in a series of blogs about code editor enhancements we are implementing within the Uniface IDE. In this series, we will share with you some of the features and improvements that we are working on to make your coding experience more productive and enjoyable. The first thing we are implementing is block commenting. Block commenting allows you to quickly comment out or uncomment a selected block of code with a single keystroke or menu command. This can be especially useful when you want to temporarily disable or enable a section of code for testing or debugging purposes. Block commenting works for ProcScript, JavaScript, HTML and CSS code, and it respects the indentation and syntax of your code. In this blog, we will show you how to use block commenting and how it can save you time and effort.  Supported languages. The Uniface editor is used for ProcScript, JavaScript, HTML and CSS. All these languages come with their own way of

Patch 10.4.02-031 Downloads Product availability Matrix (PAM)Downloads of this patch are available from the Rocket Customer Support Portal.Further explanation can be found here. New Feature(s) Code and Layout editors in the IDE now support Uppercase and Lowercase functions.Note:Installation using the edist will add a [userkeys] section to your usys.ini file. If you overlay using the patch zip file, you need to manually add to your usys.ini:[userkeys]code.uppercase=Ctrl+Ucode.lowercase=Ctrl+Shift+UOr use the Context Menu options only. Fixes UNI-34738 Project Editor Resource Browser menu's throw exception UNI-34708 IDE Resource Browser U-Bar: letters a or c can not be entered anymore UNI-34581 State project file misc/usysstat.xml only contains service. UNI-34332 In some circumstances a deadlock can occur on Linux after some time. UNI-33918 On Solaris, the 'sleep' proc statement can not sleep for more than four minutes and already returns after on average two min

Does anyone know where I can get a copy of this from?  We're having issues with the 10.3. installation, and I am going to skip it and go for 10.4, but I need to rebuild some stuff for customer installs, and this is the last version we have verified for release.  Unfortunately, I overwrote our copy with 10.3.3.025 so I can't go back internally.  Does anyone have the exe they could share with me, please? The downloads section only goes as far back as 10.3.3.000.  Regards,  Iain ------------------------------Iain SharpHead of Technical ServicesPci Systems LtdSheffield GB------------------------------

I have 3 forms components that looks partially same with a sub-part containing 31 fields, 29 labels, 2 vertical lines nicely painted. I had to review them. After doing first form I would like to copy the whole sub-part on the 2 other forms.Is there a means to copy part of paint tableau to another? (Of course we need to reserve the space in the entity and avoid overlapping).In Uniface 8 and 9, I did it by exporting the forms in xml , copying the lines in the FORMPIC field and import back.But doing this in Uniface 10, make that the IDE throws exceptions and propose to close (also after restarting the IDE), despite forms look correct and compile without errors.PS: I don't want to use a common overlay component as this forms have to run also in character mode.------------------------------Bertrand DaeneSenior DevelopperCgm Lab International GmbhKoblenz DE------------------------------

In the default usys.asn file of recent Uniface versions, irtl.dll is not an entry in the user_3gl section but I believe it used to be. What is its purpose and is it no longer needed in the user_3gl section?------------------------------Jim MitchellState of Oregon, DCBSSalem OR US------------------------------

Does anyone know if Uniface 10.4 has the same functionality (somewhere) that was provided on a toolbar for formatting and finding text in Uniface 9.7 : I used quite a few of these options all the time and was wondering if it is still available. Thanks, JCDeTurk------------------------------DeTurk JoanneSoftware ManagerMirion Technologies (Canberra), Inc.------------------------------

Why is the "Patches and Service Packs Planned Delivery Schedule" page not longer updated ? It was a good starting place to see all the releases since a certain one to  see what bugs were solved and if it was necessary/usefull to upgrade (yet) ...------------------------------Wim van EupenXperthis NVMechelen BE------------------------------

Patch 10.4.02-030 Downloads Product availability Matrix (PAM) Downloads of this patch are available from the Rocket Customer Support Portal. Further explanation can be found here. New Feature(s)Keyboard functions have been added to the IDE's Resource Browsers: * Home and End to go to first or last occurrence (currently PgUp and PgDn, which is incorrect). * ShiftHome/End to select all occurrences from current to first or last. * ShiftArrowUp/Down to add occurrences to the selection. * CtrlShiftArrowUp/Down to add occurrences to the selection irrespective how the current selection has been chosen. * Ctrl-A to select all occurrences.The Insert Frames dialog in your component Editor (Forms, Reports) can now be quit using the 'Esc' key or accepted with the 'Enter' key.Code and Layout editors in the IDE now support both block and single line *comment* and *uncomment* functions. Note: Installation using the edist will add a [userkeys] section to your usys.ini file. If you overlay