Product Forums

Fixed defects and changes in Enterprise Developer 5.0 Patch Update 25 Full article: https://portal.microfocus.com/s/article/KM000016381#EnterpriseDeveloper#SupportTips/KnowledgeDocs

Error message: CASKC0023E Unable to locate MFRHBINP Service Request Handler for request BINP is output to console when a casout command to start a batch initiator is run against the region. Full article: https://portal.microfocus.com/s/article/KM000016477#SupportTips/KnowledgeDocs#EnterpriseDeveloper

Is there a tool or process to migrate a native COBOL project from a version of Visual COBOL or Visual Studio to another version? Full article: https://portal.microfocus.com/s/article/KM000016479#SupportTips/KnowledgeDocs

cobesdebug type=JCL server=ESDEMO produces RTS 114 error Full article: https://portal.microfocus.com/s/article/KM000016488#SupportTips/KnowledgeDocs#EnterpriseDeveloper

Regions will not start in v8.0 Patch Update 4 on AIX.The console.log shows : Execution error : file 'See dump process ID for module name' error code: 200, pc=0, call=1, seg=0 200 Run-Time System internal logic error ((Shared memory semaphore error: Lock)) Full article: https://portal.microfocus.com/s/article/KM000016472#SupportTips/KnowledgeDocs#EnterpriseDeveloper

This technical article describes an issue where an AS/400 file transfer may fail with the message "Record length of input file record exceeds host file record length. Stopping transfer". Full article: https://portal.microfocus.com/s/article/KM000016463#Extra!#SupportTips/KnowledgeDocs

When DSNTIAUL is run on the mainframe and 0 records are returned from the SELECT, the COND CODE from the step is returned as 0004.   In Enterprise Server, DSNTIAUL (SQLTUL)  returns COND CODE as 0000This can cause subsequent steps to NOT be flushed in Enterprise Server, but are flushed as expected on the mainframe. Full article: https://portal.microfocus.com/s/article/KM000016470#SupportTips/KnowledgeDocs#EnterpriseDeveloper

This technical article describes a problem where the error "Unexpected parameter: Files" can occur when the Reflection Workspace is launched with "Run as administrator". Full article: https://portal.microfocus.com/s/article/KM000016550#Reflection#SupportTips/KnowledgeDocs

Getting the following error; "Host: <hostname> An error occurred  in communications Reflection SSL/TLS could not establish an encrypted connection" when attempting a host mainframe connection over a VPN (Virtual Private Network). In this particular situation, the cause of the issue was that the VPN Firewall was doing SSL encryption of all the inbound traffic from the client workstation. This was affecting applications like Reflection Desktop.  During the TLS Handshake, the VPN Firewall  was presenting the VPN Firewall certificate where Reflection Desktop  was expecting the host mainframe certificate for further validation. Since the wrong certificate was presented, the TLS Handshake was terminated as this point, which in turn caused the error to occur in the Reflection Desktop software.  Full article: https://portal.microfocus.com/s/article/KM000016539#SupportTips/KnowledgeDocs#Reflection

Steps to update from an Evaluation to a Licensed version of Rumba+ Desktop software. Full article: https://portal.microfocus.com/s/article/KM000016537#Rumba#SupportTips/KnowledgeDocs

When using SQLUTB (DSNUTILB) to load a db2 table on UNIX (DB2LUW), the following error is generated MBDT0002 - SQLCODE: -99999, SQLSTATE: 22001 - CLI0109E String data right truncation. SQLSTATE=22001 MBDT0002 - Record discarded Full article: https://portal.microfocus.com/s/article/KM000016525#SupportTips/KnowledgeDocs#EnterpriseDeveloper

When working with OpenESQL ROWSET POSITIONING, the SQL Update or Delete may fail. For example: EXEC SQL DECLARE CURSORA CURSOR WITH HOLD WITH ROWSET POSITIONING FOR SELECT COLA FROM TABLEA FOR UPDATE OF COLA END-EXEC EXEC SQL OPEN CURSORA END-EXEC EXEC SQL FETCH NEXT ROWSET FROM CURSORA FOR 10 ROWS INTO :WS-COLA END-EXEC EXEC SQL DELETE FROM TABLEA WHERE CURRENT OF CURSORA FOR ROW 1 OF ROWSET END-EXEC The SQL DELETE may fail. Full article: https://portal.microfocus.com/s/article/KM000016423#EnterpriseDeveloper#SupportTips/KnowledgeDocs

Editor is not accepting the arrow keys for navigation instead its inserting A B C D as up down right left. Full article: https://portal.microfocus.com/s/article/KM000016417#SupportTips/KnowledgeDocs

A REST API webhook is configured for package audit in a German-speaking environment, e.g. one using codepage 1141 in TSO emulator sessions. The expected EVENT50 step is included in the audit job and appears to complete successfully. I.e. it ends with a step RC=0 and all of the usual SYSPRINT messages ending with: … Results follow: --------------- HTTP/1.1 200 Processing complete with return code: 00 However, the Tomcat task shows no sign of the transaction being processed and the procedure specified by the target URL is not executed. Full article: https://portal.microfocus.com/s/article/KM000016535#ChangeManZMF#SupportTips/KnowledgeDocs

Where could I find / how could I capture the output of a phantom started by a phantom?We have the code: EXECUTE 'PHANTOM ':TASKNAME CAPTURING EXECMSGE executed by a phantom program.Display statements in the first phantom are output as normal to its &PH& file.'EXECMSGE' contains "Phantom process started -nnnnn"The secondary process does its job, but any display statements are not written to any &PH& fileRunning the secondary process from TCL shows the display outputs at the terminalRunning the secondary process as a first phantom send displays  to &PH&.Running Universe 11.1.4 on Linux.. I'm not in a position to be able to change how it runs (but still need to support it)Thank you in advance for any help :)

We have to connect a scale for cattle via a USB (defined COM3) with ACUCOBOL 10.1.5. The command and the answer are in the image. Somebody experience with this matter? Kind regards

I do LIST filename NAME   .... and got back results -- it was pulling Attribute 4 of the file.  Which, was just odd.  Turns out filename does not have a DICT called NAMEVOC does not have a DICT called NAMESO ... where did the system FIND this dict to display attribute 4?Once I installed a DICT called NAME In either DICT filename. or  VOC, it worked as expected.But still -- where was it looking to 'find' something called "NAME" that was returning attribute 4??THANKS!------------------------------David WolvertonIndependentSunset Programming IncWaltham MA US------------------------------

It appears that the Personal version of OpenQM  does not support printing - Is that correct (I can't seem to make it 'work' if it does)?------------------------------Gary------------------------------

 We love our mvBase customers and wanted to take this opportunity to provide you with some important details. First and foremost, mvBase applications will continue to be supported While we are moving mvBase through our Product Lifecycle to End of Limited Support in September, this simply means support is available but restricted.  Also, you can still renew your maintenance contract. Rocket Software customers on maintenance are entitled to obtain product upgrades at no additional charge (if new versions are available). To learn more please see the Product Lifecycle Announcement that we updated and shared via email in Sept. 2022, 12-months before moving Rocket Software MultiValue products to new stages in the Product Lifecycle.  Additionally, the Product Lifecycle Definitions and our Product Lifecycle Policy are available on the Rocket Business Connect. Second, mvBase customers have optionsWhile Rocket Software would love for our mvBase customers to migrate to another Rocket MV applicat

Hi, we are using EA 8.04.689 version on a Microsoft Windows Server 2019. I act as an administrator. By double-click on "ArchitectureModeler.exe" in the EA standard install directory (/bin) nothing happen - the app did not start. Only a "round circle" to be seen shortly (maybe from Windows). Have someone an idea why the app not start? Thanks#EnterpriseAnalyzer

We had an unusual issue where it APPEARS Attb 2 of a DIR VOC type cannot exceed a certain length.LIST / SELECT both work as expected.However, AE using an Active SELECT list or just 'raw' would return "New Item" and anything Filed would issue a WRITE error (Status =1) with a 'check for triggers' message -- which cannot be true on UD DIR types.After a while of not figuring out the issue, we moved the folder to make Attb2 of the VOC shorter and viola - the issue resolved.Does anyone know the character count allowed in attribute 2 of a DIR VOC type?  And more weirdly, why is only AE was impacted?  We might have found the issue earlier if SELECT and LIST did not work either -- as it was, we were running down to see if there were some weird permissions issues - and was about 30 minutes in when we realized the path was much longer than usual do to where the folder had been nested.------------------------------David WolvertonIndependentSunset Programming IncWaltham MA US-----------------------

New to Jbase with a background in ADP's Reality. The problem I am having is that items within a COMMON area are not transferring to subroutine. The original system was as follows:program A - $include commons os.inv ( this program sets many variables set within the include )--calls program B - carries the same include of os.inv, it does reference a common variable, but otherwise does not set any----calls program C - carries the include, references a common variableI have basically created the following:program A--program B----program D  - new program, has the same include, but the common variables are not assigned??------program Cno idea why program D, despite being a subroutine and having the same include, has unassigned common variablesAlso, was curious if there was a way to view a program which included the code from the includes. In ADP's reality, they had a command called BLIST with the option of (MEL that would give you a listing of the entire program, with included code, and form

In this part of the eLearning about DSP Web Development after downloading the first 2 examples I had no problem executing them before and after making modifications.In the 2nd 2 examples  (Using JavaScript in webtriggers & Dynamically changing HTML Layout)  both of them gave an error before even making any changes.Is it my configuration on U10CE V10,4 or has anyone else had the same experience? I would be most greatful for any help or advice. ------------------------------Alan CavillaStater N.V.Amersfoort NL------------------------------

I have below variable: 01 WS-KEY  05 WS-KEY1 PIC X(08).  05 WS-KEY2 PIC X(50). While trying to read WS-KEY against the file, I am getting file status code of 23 (which means that record is not present). However, when I checked the file, I can see the record. I am suspecting that the WS-KEY2 has junk value somewhere in it which might be leading status code of 23. How can I display the hexadecimal value of WS-KEY (or WS-KEY2 alone) to check if it has any junk value. I tried using HEX-OF function but I believe that may not be relevant for RM/COBOL.

Hello, What are the support Oracle ODBC drivers for Visual COBOL 4? Is Oracle 19 32bit ODBC driver supported for Visual COBOL 4? Is there somewhere in documentation that details supported ODBC drivers for Visual COBOL releases? Thank you, Doug