Product Forums

Hi All,Query regarding replication:We are aware there is an EXCLUDE_FILE config in repconfig which can be used to exclude a file but we are not looking to exclude all the records of that file instead just a single record of that file which is created every morning.Kindly suggest if there is any way to do so.------------------------------Shubham NigamRocket Forum Shared Account------------------------------

Hi, We're needing to investigate encryption for several clients and understand we can turn it on  from the documentation here. However, we can't find any information on the specifics about how the encryption works.  Some questions we need answered are: Payload Encryption Is it and how is the payload encrypted? What is the encryption algorithm? Key Management Encryption type? Key length/size? Key rotation frequency? Key distribution? Thanks for any assistance with this query. Regards, ------------------------------Peter RuthIAS Customer SupportINTEGRATED AVIATION SOFTWARE PTY. LTD.Fullarton SA AU------------------------------

Christian, Apparently, the extension in Stack Overflow is no longer available.But thanks for the information so I can stop spinning my wheels! Dan------------------------------dan brombergRocket Forum Shared Account------------------------------

Since the update to MVBasic  2.7.1 when using the online edit mode whenever I go to open a program, I get the following error message:asjava.uniobjects.UniSubroutineException: The RPC failedI can navigate around the server and look at the files and switch accounts with no issue. The moment I go to open a program it seems to disconnect me.I attached the log for extra information.As a work around I reverted back to 2.7.0 and everything works as intended.------------------------------Jeremy BartonRocket Forum Shared Account------------------------------

Hey, i'm trying to convert a (complexe) uniface associative list into a struct. I found some samples on this forum but i'm encoutering some problems. this 'debug' screen shows the result after the struct->$name (1) instruction.  As you can see in the results (2) the node did not accept the name, nore did we get any error. I tried to simulate the procedure via a test-form and (obviously) here we donnot encouter any problems (see attachment) Anyone? Thanks in advance, Geert------------------------------Geert DupontZorgi NVMechelen BE------------------------------

Hi everyone, I'm very new to Host Access and D3. We're currently working in a D3 Pick environment using the TCL (Terminal Command Language) prompt, and I need to learn everything from scratch. I do have access to Rocket Software's D3 reference manuals, but they're quite large and a bit overwhelming to read cover to cover. Could anyone please suggest the best places to find learning materials - especially video tutorials that cover basic concepts, TCL commands, creating simple programs, and understanding how everything works with real examples? I really prefer videos or more practical, hands-on resources rather than just manuals. Thanks so much in advance for your help!------------------------------Rima PrajapatiSenior IT SupportRocket Software Forum Member------------------------------

Hi everyone, I'm very new to Host Access and D3. We're currently working in a D3 Pick environment using the TCL (Terminal Command Language) prompt, and I need to learn everything from scratch. I do have access to Rocket Software's D3 reference manuals, but they're quite large and a bit overwhelming to read cover to cover. Could anyone please suggest the best places to find learning materials - especially video tutorials that cover basic concepts, TCL commands, creating simple programs, and understanding how everything works with real examples? I really prefer videos or more practical, hands-on resources rather than just manuals. Thanks so much in advance for your help!------------------------------Rima PrajapatiSenior IT SupportRocket Software Forum Member------------------------------

Hi everyone, I'm very new to Host Access and D3. We're currently working in a D3 Pick environment using the TCL (Terminal Command Language) prompt, and I need to learn everything from scratch. I do have access to Rocket Software's D3 reference manuals, but they're quite large and a bit overwhelming to read cover to cover. Could anyone please suggest the best places to find learning materials - especially video tutorials that cover basic concepts, TCL commands, creating simple programs, and understanding how everything works with real examples? I really prefer videos or more practical, hands-on resources rather than just manuals. Thanks so much in advance for your help!------------------------------Rima PrajapatiSenior IT SupportRocket Software Forum Member------------------------------

Greeting folks! Are any of y'all of anyway to include Excel formatting characters in a CSV file? THX in advance for your helpful replies! ~Doc ------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

If you're curious about how agent volume impacts your workload performance, check out @Jonathan Arambula's blog post where discusses why monitoring agent volume —the number of tasks completed by each agent—is crucial for keeping your workflows running efficiently as your business grows. The blog covers: Why agent volume matters for stability and fault tolerance How to quickly identify and resolve bottlenecks Detailed instructions for viewing agent volume reports in Zena and Enterprise Orchestrator This is a great tips if you're troubleshooting slow processing or planning to scale your automation. If you have any additional questions or comments, please drop them below!------------------------------Olivia SultanovSolution Marketing ManagerRocket Forum Shared Account------------------------------

Hi, I am using the standalone Exceed TurboX Client on Windows 10 and have a question about the keyboard focus behavior (is this the right forum to post such a question anyway?): Is there some key combo I can use to release keyboard focus? When I switch to a running TurboX Client my keyboard is immediately captured, so following Alt-TABs are directed towards the client VM. That's okay, although it would be nice if this behaviour could be controlled by an option setting, But I didn't find any possibility to release the keyboard again by pressing some key combination. For that it seems I have to click outside the app's window or minimize it. Is this a known limitation? Or am I missing some option setting I didn't come across yet? Best regards ------------------------------Eckehardt LuhmRocket Software Forum Member------------------------------

Dear, we are trying to simulate an example from de Rocket Library, but this does not work: XML Attribute Our code variables struct vStruct string vXML endvariables vStruct = $newstruct vStruct -> para= "txt" vStruct -> para -> $tags -> xmlClass = "element" vStruct -> para -> audience = "admin" vStruct -> para -> audience -> $tags -> xmlClass = "attribute" putmess vStruct -> $dbgstring ; $dbgstring returns following result []  [para]    [$tags]      [xmlClass] = "element"    "txt"    [audience] = "admin"      [$tags]        [xmlClass] = "attribute" structtoxml vXml,vStruct ; the xml however gives us : <para>txt</para> ; where we would expect  <para audience="admin">txt</para> ; any ideas (someone) ; we hope that any solution that will  be given will also work for structToJson ------------------------------Geert DupontZorgi NVMechelen BE------------------------------

Low-code platforms like Rocket® Uniface are accelerating innovation-but in today's threat landscape, speed can introduce new vulnerabilities. Our latest white paper is a must-read for Uniface users, IT leaders, and security-minded developers. It explores: ✅ The evolving cybersecurity risks facing low-code environments✅ Key principles for embedding security throughout the development lifecycle✅ How Application Certification in Uniface 10.4.03 helps prevent runtime tampering-without slowing you down 👉 Download the white paper now Have questions or insights about securing your Uniface apps? Join the conversation below! 💬------------------------------Julie HohmanCustomer Retention MarketingRocket Internal - All BrandsSimpsonville SC US------------------------------

Understanding agent volume – or the number of tasks completed by each agent – is critical for maintaining system performance and stability. If you notice that processing times are longer than usual, it may be a sign that your agent volume needs attention. Regularly monitoring agent volume allows you to identify potential bottlenecks and optimize how jobs are assigned, making the most of your resources and ensuring your workflows continue to run smoothly as your business grows. So why does agent volume matter? Managing agent volume is critical because as your business grows, the number of workflows increases. Distributing jobs across a larger agent pool prevents bottlenecks and ensures workloads run on time. Also, if one node fails, other agents can pick up pending tasks, which minimize disruption. How to check agent volume in Zena and Enterprise Orchestrator To view the agent volume report: Navigate to Operations in the main menu. Under System Reports Click on Agents. Right-Click Se

Not sure if this is the right forum for this.  We recently started using the Data Virtualization Driver v3.1 and are getting a stack overflow that crashes our application every 10 minutes or so in production.  After some research I determined it's due to parameterized queries.  The parameter info is being cached by the driver in the connection pool until it reaches some limit and crashes with a stack overflow error.  If I turn off connection pooling, or hard-code the values into the query instead of properly parameterizing it, it stops crashing.  But I'd rather not do those things if I can help it.  I can easily recreate the error in our lower environments by loading up a query that parameterizes 200 parameters, and then setting it to run 100 times in sequence.  Our production users aren't plugging in that many parameters, but are hitting the cache limit through sheer volume of queries instead. Are there any connection string settings or driver sett

Is it possible to call a web page / open a new browser window when running AccutermIO?  If so, is there documentation available?------------------------------David KylesDirector of ITMDC Interior SolutionsGlendale Heights IL US------------------------------

Hi, I've been trying for a few weeks to get MVVS to work with Online Editing. I'm able to log on to my server and see all the different accounts and their files; however, when I try to open up a program, I get an error message saying the file could not be found. Further inspection into the logs revealed that there is an error with XToolSub. The error is U2 XToolSub logon account exception, {oldAccount: TESTACCOUNT, newAccount: XDEMO com.rs.mv.mvvs.common.exception.MvVsException: failed to logto account Is there something that UV admin has to do to allow for the logto to succeed? Any help would be appreciated. 

Big news for SB/XA, SBClient and SB+ customers! The latest release, 6.6.3 of System Builder Extensible Architecture (SB/XA), System Builder Client (SBC), and System Builder Plus (SB+) has been released. For SB/XA Customers: Suppress NO DETAIL LINES CREATED Message: When Report Writer output is set to DIF format and no records are selected, the error message "NO DETAIL LINES CREATED" can now be suppressed. Simply set /SB.PARMS > Reports > Suppress NO DETAIL LINES CREATED Message For DIF Output to Yes. This enhancement eliminates the need for user input, ensuring smooth batch processing. Rocket MX Workbench Compatibility: SB/XA can now run in the Rocket MX Workbench with the new VT220MX terminal type. This terminal type can identify SB application screens and displays a unique screen identifier on the 25th line for Dialogs, Menus, Input/Output Screens, Reports, and Selection Screens. For SBClient Customers: Optimized SFTP File Transfer: SFTP file transfer has been optimized for

I have a question about CALL CBLTDLI. 1. A customer is using the following four methods to start CBLTDLI.   Are all of these supported by the product?   Also, if there are no errors during compilation, can I assume that the product supports them? ◆Pattern 1: When the first argument is FUNC03 GU PIC X(4) VALUE 'GU'.～～CALL 'CBLTDLI' USING GU PCB1 IOAREA1 SEGAREA1 SEGAREA2. ◆Pattern 2: When the first argument is 'PCB'03 PCB PIC X(4) VALUE 'PCB'.77 PWA380 PIC X(8) VALUE 'PWA380 '.～～CALL 'CBLTDLI' USING PCBPWA380ADDRESS OF DLIUIB. ◆Pattern 3: When the first argument is a PCB number01 PARM PIC S9(08) COMP VALUE ZERO.01 PCB01 PIC X(156).～～MOVE S-FUNC TO C-FUNC.MOVE S-FUNC TO FUNC.～～IF C-FUNC = 'REPL' OR 'DLET'MOVE 3 TO PARM～～CALL 'CBLTDLI' USING PARM FUNC PCB01 IOSEG SSA1 SSA2 SSA3 ◆Pattern 4: When the total number of arguments is 703 GNP PIC X(4) VALUE 'GNP'.～～CALL 'CBLTDLI' USING GNP PCB1 IOAREA1 SSA1 SSA2 SSA3 SSA4. 2. Is there documentation of the supported syntax?------------------------

Do we support RKSIZE for LCHILD, in PSINDEX,VSAM ? Can it be ignore ?   *********************************************************************** * O U T S T A N D I N G D E A L SECONDARY INDEX * * HONGKONG * * 04/01/19 NEETHU DUPPAY :UPDATED LENGTH FROM 83 TO 99 * *********************************************************************** DBD NAME=II001ONF, X ACCESS=(PSINDEX,VSAM) SEGM NAME=IXQDIONF, X PARENT=0, X BYTES=99 FIELD NAME=(DIONFKEY,SEQ,U), X BYTES=27, X START=1 LCHILD NAME=(IXQDBDEL,IB001DEL), X INDEX=DIONFSRC, X RKSIZE=12, X POINTER=SNGL DBDUT0404W Unknown keyword, RKSIZE for LCHILD, ignored. DBDGEN FINISH END     Do we support  DSGROUP ?  or can it be ignore    FIELD NAME=(FDADT,SEQ,U), X BYTES=8, X START=1, X TYPE=C SEGM NAME=IXQDBSPR, X DSGROUP=B, X PARENT=IXQDBDEL, X BYTES=80, X PTR=(T)     [ims] Generating IB001DEL.dbd... [ims] DBDGEN starting [ims] DBDUT0404W Unknown keyword, DSGROUP for

Hello Community, Our customer is using GIT for his Softwarerepository on z/OS. We have changed from z/OS 2.5 to z/OS 3.1 last week and changed also the  GIT Version from 2.26.2-78 to 2.41.0-4. Now we get a lot of RACF messages like follows and the result is not as expected: ICH408I USER(USSGIT  ) GROUP(UITUVERF) NAME(USSGIT -TECHN. USER ).git/objects/pack/pack-a4854ba0aa6a6333d597deea4f53b5f24d64e030.pack                                                              CL(FSOBJ   ) FID(C8E4D6D4F0F106C60000000140D9B4F3)                    INSUFFICIENT AUTHORITY TO UTIME                                      ACCESS INTENT(-W-)  ACCESS ALLOWED(OWNER      R--)                  EFFECTIVE UID(0013900119)  EFFECTIVE GID(0013900004)                The file is created with permission 444 and owner is USSGIT. We tried to solve the problem by setting default file ACL for the directory, but GIT seems to ignore this! Any suggestions! Many Thanks in advance!------------------------------Jurgen Hildebra

Our system uses Orbix 6 6.3.12 on Solaris 11, x64. On some installations, the system processes report multiple warnings, such as "OpenSSL Toolkit Warning: unknown". These warnings do not appear on other computers. I've checked that the warnings are not displayed when the openssl version command returns OpenSSL 1.0.2zf 21 Jun 2022, but are displayed when it returns OpenSSL 1.0.2zi  1 Aug 2023. Does this difference in OpenSSL explain the warnings? Do we need to upgrade Orbix to eliminate them? To which version? Another explanation or/and solution?------------------------------Gennady GozmanECI Telecom LtdPetakh Tikva IL------------------------------

Patch 10.4.03-019 Downloads Product availability Matrix (PAM)Downloads of this patch are available from the Rocket Customer Support Portal.Further explanation can be found here. New Feature(s) Uniface UX widgets support IN parameters for trigger and webtriggerUX widgets can now pass scalar type parameters to triggers and webtriggers. For more information, see the Uniface documentation: Uniface Reference > API Reference > APIs: DSP UX Widget Class > mapTrigger. Security enhancements on paths encryption. Enhanced Uniface resource cleanup routines to ensure proper release of system resources after use. Currencies Add support for PostgreSQL 17 (PGS U1.9) on RedHat 8 and 9, Oracle Linux (LIF and LIG). Fixes UNI-46722  System triggers allow the use of the 'public web' access qualifier. UNI-46722  -  System triggers allow the use of the 'public web' access qualifier. Solution available in patch(es):      10.4.03-019 Description: No compiler er

I updated my ssl certificate on my target server.  It has been working great.  I am using this chunk of code to call it:    st2 = createSecurityContext(ctx2, "TLSv1.2")   st2 = createSecureRequest(purl, pmethod, pobjRequest, ctx2)   st2 = setRequestHeader(pobjRequest, "OPPSAUTH",AUTH)   st2 = setRequestHeader(pobjRequest, "OPPSSERVER",SERVER)   st2 = setRequestHeader(pobjRequest, "Content-Type","application/json")   st2 = submitRequest(pobjRequest, 5000, POST.DATA, pheaders, pdata, httpstatus)I reissued my cert and updated it and now when I try to call the server, I am getting:  1896:error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed:.\\ssl\\s3_clnt.c:1258:I tried to do some testing by copying the program and simplifying it and when I compile, it give the same error the first time I compile it, but then it will compile, but still does not work.If I put the old cert back, it works fine again.  I also tried calling a different server and that works fine as

Are there any plans to add JIT privileged access management to Accuterm for Linux in the future?