Skip to main content

[archive] Bitmap Scale

  • October 28, 2009
  • 12 replies
  • 0 views
D

[Migrated content. Thread originally posted on 26 October 2009]

Hello,

I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
2 - I try to set up on run time, not design time, but nothing:

ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
ON EXCEPTION
MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
NOT ON EXCEPTION
INITIALIZE ACU-FULLBITMAPPATH
INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
"\\" DELIMITED BY SIZE
"dibujo.bmp" DELIMITED BY LOW-VALUE
INTO ACU-FULLBITMAPPATH
END-ACCEPT
CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
GIVING apertura-bmp
END-CALL

display bitmap
bitmap-scale 1,
BITMAP-HANDLE apertura-bmp,
size 120 pixels,
lines 80 pixels,
col 30,
line 20,
handle in bt-1

If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

Actually i have no point. Any ideas?

Thanks afterwards

    12 replies

    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    Just a clip out of the doc that might apply:

    Currently, only 24-bit colors are supported. If your bitmap is not 24 bit, you can use Microsoft paint to store the bitmap as 24 bit.
    We recommend that jpeg files be used whenever possible, as they appear to give the best resizing capability.



    Hope This Helps...
    -Chris
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    Just a clip out of the doc that might apply:

    Currently, only 24-bit colors are supported. If your bitmap is not 24 bit, you can use Microsoft paint to store the bitmap as 24 bit.
    We recommend that jpeg files be used whenever possible, as they appear to give the best resizing capability.



    Hope This Helps...
    -Chris
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    Just a clip out of the doc that might apply:

    Currently, only 24-bit colors are supported. If your bitmap is not 24 bit, you can use Microsoft paint to store the bitmap as 24 bit.
    We recommend that jpeg files be used whenever possible, as they appear to give the best resizing capability.



    Hope This Helps...
    -Chris
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    Your code does not show that you display a graphical window, I presume you do this?

    I notice that you display the bitmap control direct. Have you tried to display the control as
    a member of a screen section?

    It would be easier to check this if you could provide a full sample program (minimal size of course).

    Have you checked the value of the handle (apertura-bmp) returned from w$bitmap?

    Btw, you do not have to use NULL termination on parameters library routines.

    Can you tell me how apertura-bmp is defined?
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.


    Yeah, i'm using a 24 bits bitmap like i said.
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.


    Yeah, i'm using a 24 bits bitmap like i said.
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    Yeah, i'm using a graphical screen, if i comment in the manual display the bitmap-scale property all works well, the image is loaded correctly, etc etc.

    77 Apertura-bmp usage is handle of bitmap.

    And i'm using a manual display beacuse we set that acubench generates our screen section automatically. I'll try to reproduce in a program.
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    Yeah, i'm using a graphical screen, if i comment in the manual display the bitmap-scale property all works well, the image is loaded correctly, etc etc.

    77 Apertura-bmp usage is handle of bitmap.

    And i'm using a manual display beacuse we set that acubench generates our screen section automatically. I'll try to reproduce in a program.
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    Yeah, i'm using a graphical screen, if i comment in the manual display the bitmap-scale property all works well, the image is loaded correctly, etc etc.

    77 Apertura-bmp usage is handle of bitmap.

    And i'm using a manual display beacuse we set that acubench generates our screen section automatically. I'll try to reproduce in a program.
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    My apologize, was an idiot mistake, all the code is correct but i was executing the program in 7.2 compatibility
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    :-)

    Been there, done that.
    D

    [Migrated content. Thread originally posted on 26 October 2009]

    Hello,

    I looked up for some tips here in the forums, but i see no one have posted something about this new feature in v8. That make me think that or all is working as intended and no one have problems or maybe no one use it :confused:. But, i have some problems with it:

    1 - The scaled property doen't show in the acubench gui, and i tried to put it on "aditional properties" but nothing happens (in the help, i see that must be defined this property before bitmap-handle, maybe that's the tip)
    2 - I try to set up on run time, not design time, but nothing:

    ACCEPT ACU-BITMAPPATH FROM ENVIRONMENT "Bitmap-Path"
    ON EXCEPTION
    MOVE "dibujo.bmp" TO ACU-FULLBITMAPPATH
    NOT ON EXCEPTION
    INITIALIZE ACU-FULLBITMAPPATH
    INSPECT ACU-BITMAPPATH REPLACING TRAILING SPACE BY "\\"
    INSPECT ACU-BITMAPPATH REPLACING TRAILING "\\" BY LOW-VALUE
    STRING ACU-BITMAPPATH DELIMITED BY LOW-VALUE
    "\\" DELIMITED BY SIZE
    "dibujo.bmp" DELIMITED BY LOW-VALUE
    INTO ACU-FULLBITMAPPATH
    END-ACCEPT
    CALL "W$BITMAP" USING WBITMAP-LOAD ACU-FULLBITMAPPATH,
    GIVING apertura-bmp
    END-CALL

    display bitmap
    bitmap-scale 1,
    BITMAP-HANDLE apertura-bmp,
    size 120 pixels,
    lines 80 pixels,
    col 30,
    line 20,
    handle in bt-1

    If i comment the bitmap-scale 1 sentence, the image shows. It's a 24 bits color bitmap, like the help says.

    Actually i have no point. Any ideas?

    Thanks afterwards
    :-)

    Been there, done that.

    Recent badge winners

    Explore all badges
    Terms & ConditionsAccessibility statement