Rocket® Enterprise Suite

In PAC environment, 2nd TRANCLASS transaction starts but queued, does not start running. Full article: https://portal.microfocus.com/s/article/KM000017026#SupportTips/KnowledgeDocs#EnterpriseDeveloper

The cron scheduler was calling the cobrun executable to run a COBOL program.That program then called a second program, using CALL “SYSTEM” where cobrun was again loaded. The second program was in a sub directory from where the initial program was running from.The issue encountered was that the second program did not run.Following is an example of how crontab might be set up:  # crontab -e# */5 * * * * cobrun /home/test/prog1 The called program prog1 resides in /home/test.Prog1 makes a call to the operating system  CALL “SYSTEM” USING COMMAND-STRING where COMMAND-STRING contains the string: cobrun subdir/bin/prog2 Full article: https://portal.microfocus.com/s/article/KM000017023#SupportTips/KnowledgeDocs#EnterpriseDeveloper

When a transaction reaches the Elapsed purge time threshold limit defined in the CICS transaction, an RTS249 error is generated. Full article: https://portal.microfocus.com/s/article/KM000017022#SupportTips/KnowledgeDocs#EnterpriseDeveloper

The "version 1 authentication" MLDAP ESM Module configuration variable specifies which Compatibility Rule Matching algorithm to use.However, due to a defect, explicitly setting the above configuration variable to any value disables DSS-wildcard support. This is a known issue and is being reviewed for a fix. Full article: https://portal.microfocus.com/s/article/KM000016973#EnterpriseDeveloper#SupportTips/KnowledgeDocs

Is extra partition queue supported in a PAC? Full article: https://portal.microfocus.com/s/article/KM000017052#SupportTips/KnowledgeDocs#EnterpriseDeveloper

Is the Scan64 report in EA always turned on is does it have to be enabled to return results? Full article: https://portal.microfocus.com/s/article/KM000016881#EnterpriseAnalyzer#SupportTips/KnowledgeDocs

ESCWA or ES Admin view freezes intermittently. Full article: https://portal.microfocus.com/s/article/KM000017076#SupportTips/KnowledgeDocs#EnterpriseDeveloper

Recently it has been found that there is a security vulnerability with .Net version 6.0.3.This version is shipped with Enterprise Analyzer (EA) 8.0.Does this version need to be installed on the machine to install EA?Does this version need to be kept to be able to use EA? Full article: https://portal.microfocus.com/s/article/KM000016837#SupportTips/KnowledgeDocs#EnterpriseAnalyzer

Hi, I could see the below events in Communication logs of CICS region. Whats the purpose of this event ? Whats NVT? Is it a Information or warning event ? #EnterpriseServer

I am trying to consume a Web Service API Rest Provider from a native COBOL program. To do this, I have created the Web Service Requester using the "imtkmake -genclientjson clientjson=json_name" command from OpenApi Schema, but when I make the call I get an error code 1401 (which I don't know what it means). Could someone tell me if the result of the aforementioned error can be found in any documentation? Even so, I have managed to successfully consume another operation from the same Web Service Provider. In fact, the difference I'm seeing is that the operation I'm trying to consume that is failing has a URL parameter {polissa}, and this makes me suspect that this is the problem. Finally, I've attached a piece of the code I'm using to make the call: entry "getPolicy" using getPolicy-parms. move polissa of input-parms of getPolicy-parms to wsc-polissa-op04I-01 set wsc-proc-ptr to entry "nxwscrun" set wsc-ptr-arg(1) to address of wsc-polissa-op04I-01 set wsc-ptr-arg(2) to address of

I'm submitting a job via REST with the following endpoint with POST method POST hostip:10086/.../jescontrol with the foll. request body {"ctlSubmit":"Submit","subJes":1,"xatSwitch":"c:\\pathtojcl\\test.jcl"} I'm getting a response message in msgout - "Please enter a JCL file name to upload"  and in the messages array - JOB FLUSHED - MISSING JOB STATEMENT (JOBNUM=0001009). 08:52:45 In the web console JES Control, I look at the spool and the jobname is "??????" How do I specify the jcl file name in the request body ?  #EnterpriseServer

When you attempt to restart the license services, you get the following error:ERROR: License code "10 EnterpriseDeveloper 1.0 LONG NORMAL NETWORK ADD 1_KEYS INFINITE_KEYS 1 JAN 2009 NEVER USER_SHR:10 SLM_CODE 2_LOG_ENCRYPTION_LEVEL NON_COMMUTER NO_GRACE NO_OVERDRAFT FLOAT NON_REDUNDANT 3488300C,Ni NiL Ni NO_HLD NiL 5_MINS yK3mfLDz,jWp4DVFfvd63j55G5GgGG,HhhF8ljrwEXLVL196IA9RAPzGOW6GOrxmfZ:AQ4szIiRDpVv1awCa1Gf424THMVtq6AkHZAIv9IwlLnfP06EhasHuJ9qhrAOE:6f1qAQBH6P49R7tFdGM0K0VVV" (feature "EnterpriseDeveloper") is not authorized on this machine.When the license is revoked you get the following error:### Revoke failed for license EnterpriseDeveloper### revoke: Error[115]: Revocation failed due to internal server error.### Revoke failed for license IMS-DB### revoke: Error[115]: Revocation failed due to internal server error. Full article: https://portal.microfocus.com/s/article/KM000016603#EnterpriseDeveloper#SupportTips/KnowledgeDocs

ESF update failed 008/092/000 appears in console log when trying to do an esfupdate via the command line. Full article: https://portal.microfocus.com/s/article/KM000016614#EnterpriseDeveloper#SupportTips/KnowledgeDocs

The following message could be erroneously issued when attemping a VSAM Rewrite in PL/I MPLIR05314E Condition ERROR raised. Error(156): Bad record size on current record Full article: https://portal.microfocus.com/s/article/KM000016672#SupportTips/KnowledgeDocs#EnterpriseDeveloper

After Patch Update install, the project properties pane is empty and syntax highlighting not working. Full article: https://portal.microfocus.com/s/article/KM000016670#EnterpriseDeveloper#SupportTips/KnowledgeDocs

RTS 114 error on module DFHGREQ and region hangs with vulnerability scan.Sample error message: Execution error : file 'DFHGREQ' error code: 114, pc=0, call=1, seg=0 114 Attempt to access item beyond bounds of memory (Signal 11) Full article: https://portal.microfocus.com/s/article/KM000016666#SupportTips/KnowledgeDocs#EnterpriseDeveloper

COBOL .NET Projects - NuGet Package does not use the relevant path for copybooks Full article: https://portal.microfocus.com/s/article/KM000016634#SupportTips/KnowledgeDocs#EnterpriseDeveloper

When running a program that is accessing MSSQL database in 64bit, the job/JCL the following error is generated JCLCM0188I J0001084 IKJEFT01 JOB STARTED 07:48:24 CASKC0027E Error executing service 'PGM#SZMQINF' Execution error : file 'SZMQINF' error code: 114, pc=0, call=1, seg=0 114 Attempt to access item beyond bounds of memory (Signal 11) 07:48:24 JCLCM0192S J0001084 IKJEFT01 STEP ABENDED STEP001 - COND CODE RTS0114 07:48:24 JCLCM0181S J0001084 IKJEFT01 JOB ABENDED - COND CODE RTS0114 07:48:24 Full article: https://portal.microfocus.com/s/article/KM000016635#SupportTips/KnowledgeDocs#EnterpriseDeveloper

CICS Access Possibilities with a Single Sign-On in Enterprise Developer 7 Full article:https://portal.microfocus.com/s/article/KM000016730#EnterpriseDeveloper#SupportTips/KnowledgeDocs

MFMON2 synchronization generates an error message : Input string was not in a correct format.: / / : : Full article: https://portal.microfocus.com/s/article/KM000016725#EnterpriseDeveloper#SupportTips/KnowledgeDocs

PAC Members registered as hosname (short) instead as full-qualified-domain-name (fqdn - long) Full article: https://portal.microfocus.com/s/article/KM000016629#SupportTips/KnowledgeDocs#EnterpriseDeveloper

While attempting to build an Oracle RM Switch Module for XA on Unix/Linux platforms as documented here, you may receive one or more errors that the build is unable to find certain Oracle shared objects, and is "skipping incompatible" items.For example:  $ ./build ora -r building 32-bit switch module...  * Cobsql Integrated Preprocessor * CSQL-I-018: Invoking Oracle Precompiler/Translator * CSQL-I-020: Processing output of Oracle Precompiler * CSQL-I-001: Cobsql has finished returning to the Checker /usr/bin/ld: skipping incompatible /u01/app/oracle/product/19.0.0/dbhome_1/lib//libclntsh.so when searching for -lclntsh Full article: https://portal.microfocus.com/s/article/KM000016703#EnterpriseDeveloper#SupportTips/KnowledgeDocs

The SYSPRINT dataset in a job is only produced when the program for which it has been assigned has actually written anything to it. If there is no output to it, then the dataset is deleted at the end of the job. Full article: https://portal.microfocus.com/s/article/KM000016622#SupportTips/KnowledgeDocs#EnterpriseDeveloper

When executing an HCOSS SQLCLR COBOL Stored Procedure which contains a COBOL XML GENERATE statement, gets error: Msg 6522, Level 16, State 1, Procedure dbo.XXXXXXXX, Line 0 [Batch Start Line 2] A .NET Framework error occurred during execution of user-defined routine or aggregate "XXXXXXXX": System.Security.SecurityException: Request failed. System.Security.SecurityException: at System.RuntimeMethodHandle.PerformSecurityCheck(Object obj, RuntimeMethodHandleInternal method, RuntimeType parent, UInt32 invocationFlags) at System.RuntimeMethodHandle.PerformSecurityCheck(Object obj, IRuntimeMethodInfo method, RuntimeType parent, UInt32 invocationFlags) at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at MicroFocus.COBOL.Program.Control.Load(RuntimeTypeHandle rth, RunUnit runUnit) at MicroFocus.COBOL.Program.Control.Load(RuntimeTypeHandle rth, IObjectControl pgInstance) at XXXXXXXX.XXXXXXXX(Reference IN-SERVIC

When using SQLUTB (DSNUTILB) to load a db2 table on UNIX (DB2LUW), the following error is generated MBDT0002 - SQLCODE: -99999, SQLSTATE: 22008 - CLI0113E SQLSTATE 22007: An invalid datetime format was detected; MBDT0002 - Record discarded DSNU012I DSNUGBAC - UTILITY EXECUTION TERMINATED, HIGHEST RETURN CODE=8 Full article: https://portal.microfocus.com/s/article/KM000016779#SupportTips/KnowledgeDocs#EnterpriseDeveloper