Hey all:
Windows Server 2016
Version 8.3.2, Build 2000
UDT Configuration: Server, 64-bit(x64)

The manual provides the following syntax for RESIZE:

RESIZE {DICT} filename modulo {DYNAMIC | STATIC} [BLOCK.SIZE n]

D_FUND_ADVICE.LIS recommends we resize DICT FUND.FILE from 7 to 13 and BLOCK SIZE from 1024 to 4096.
udtconfig shows SHM_LBA=4096.

Yet when I try to resize, this is the result:

RESIZE DICT FUND.FILE STATIC 13 BLOCK.SIZE 4096
-------------------------------^
syntax error

RESIZE DICT FUND.FILE STATIC 13 BLOCKSIZE 4096
-------------------------------^
syntax error

What am I missing?

------------------------------
Rich Lucibella
Director
Rocket Forum Shared Account
------------------------------

Rich,

The BLOCK.SIZE is as below - a multiplier, not a byte value :

The size, expressed as a multiplier, of each group in a hashed file.

If you specify a block size multiplier of 0, UniData creates 512-byte Groups. A block size multiplier of 1 represents 1024 bytes, 2 represents 2048 bytes, and so on. For 32-bit files, the maximum block size multiplier is 16.

If specifying a larger value 16 will be used. For 64-bit (new at UniData 8.1.0), the block size limit is '2 GB - 1' (2,147,483,647). If the block size multiplier is not a power of 2, it will be rounded down to the nearest power of 2. See the CREATE.FILE help for more details on 64-bit files.

Hoping this helps.

Regards

JJ

Rich,

The BLOCK.SIZE is as below - a multiplier, not a byte value :

The size, expressed as a multiplier, of each group in a hashed file.

If you specify a block size multiplier of 0, UniData creates 512-byte Groups. A block size multiplier of 1 represents 1024 bytes, 2 represents 2048 bytes, and so on. For 32-bit files, the maximum block size multiplier is 16.

If specifying a larger value 16 will be used. For 64-bit (new at UniData 8.1.0), the block size limit is '2 GB - 1' (2,147,483,647). If the block size multiplier is not a power of 2, it will be rounded down to the nearest power of 2. See the CREATE.FILE help for more details on 64-bit files.

Hoping this helps.

Regards

JJ

Well, that just opened a whole new can of worms:
1) If I understand you and read the manual correctly:

RESIZE DICT CAP.FILE 3 BLOCK.SIZE 4
should result in a BLOCK SIZE of 4096, no?

2) If I've created a file without specifying the bit, it's created at 32BIT....
Would 
RESIZE [FILE NAME] [MODULO] DYNAMIC 64BIT
convert it to 64BIT Addressing?

Thanks again-

Rich

Hey all:
Windows Server 2016
Version 8.3.2, Build 2000
UDT Configuration: Server, 64-bit(x64)

The manual provides the following syntax for RESIZE:

RESIZE {DICT} filename modulo {DYNAMIC | STATIC} [BLOCK.SIZE n]

D_FUND_ADVICE.LIS recommends we resize DICT FUND.FILE from 7 to 13 and BLOCK SIZE from 1024 to 4096.
udtconfig shows SHM_LBA=4096.

Yet when I try to resize, this is the result:

RESIZE DICT FUND.FILE STATIC 13 BLOCK.SIZE 4096
-------------------------------^
syntax error

RESIZE DICT FUND.FILE STATIC 13 BLOCKSIZE 4096
-------------------------------^
syntax error

What am I missing?

------------------------------
Rich Lucibella
Director
Rocket Forum Shared Account
------------------------------

Rich,

Along side the introduction of the 64BIT keyword for CREATE.FILE, there is a also a documented environment variable to switch the default file creation bit mode from 32BIT to 64BIT, should you wish to create all your files as 64BIT. In UniVerse this is controlled with a configurable in the uvconfig file, in UniData it is  controlled via an environment variable.

For more details see the 'Environment Variables For UniData' in the 'Administrating UniData on Windows and Unix Platforms' and review the details for UD_CREATE_64BIT

Regards,

Jonathan

Hey all:
Windows Server 2016
Version 8.3.2, Build 2000
UDT Configuration: Server, 64-bit(x64)

The manual provides the following syntax for RESIZE:

RESIZE {DICT} filename modulo {DYNAMIC | STATIC} [BLOCK.SIZE n]

D_FUND_ADVICE.LIS recommends we resize DICT FUND.FILE from 7 to 13 and BLOCK SIZE from 1024 to 4096.
udtconfig shows SHM_LBA=4096.

Yet when I try to resize, this is the result:

RESIZE DICT FUND.FILE STATIC 13 BLOCK.SIZE 4096
-------------------------------^
syntax error

RESIZE DICT FUND.FILE STATIC 13 BLOCKSIZE 4096
-------------------------------^
syntax error

What am I missing?

------------------------------
Rich Lucibella
Director
Rocket Forum Shared Account
------------------------------

There are in fact two environment variables you can use

DEFAULT_FILE_IS_64BIT When set to 1, all SQL table files, hashed files and non-hashed files get created as 64BIT (without the need for the 64BIT keyword)

and

UD_CREATE_64BIT When set to 1, all hashed files get created as 64BIT (without the need for the 64BIT keyword)

Although not mentioned currently in the help for CREATE.FILE these are documented in the Administration Guide. The command reference manual will be updated to reference these variables in a latter release.