I can't figure out what I see in functional subtypes after migrating from Uniface-9 to Uniface-10.
In the original entity D_BUTTONS I see:
Declarations
Collection Script
....
and before the entries:
#ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL
In the subtype D_BUTTONS2 I see this:
Declarations
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
...
And before the entries:
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL (mind the '2')
I noticed that additional warning and errors are generated when compiling forms with functional subtypes in Uniface-10 for code that was not included in the same form in Uniface-9.
Can somebody smarter then me tell me what I'm doing wrong?
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
Functional subtypes after migrating from Uniface-9 to Uniface-10.
+2- Rocketeer
I can't figure out what I see in functional subtypes after migrating from Uniface-9 to Uniface-10.
In the original entity D_BUTTONS I see:
Declarations
Collection Script
....
and before the entries:
#ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL
In the subtype D_BUTTONS2 I see this:
Declarations
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
...
And before the entries:
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL (mind the '2')
I noticed that additional warning and errors are generated when compiling forms with functional subtypes in Uniface-10 for code that was not included in the same form in Uniface-9.
Can somebody smarter then me tell me what I'm doing wrong?
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
In the original entity D_BUTTONS I see:
Declarations
Collection Script
....
and before the entries:
#ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL
In the subtype D_BUTTONS2 I see this:
Declarations
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
...
And before the entries:
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL (mind the '2')
I noticed that additional warning and errors are generated when compiling forms with functional subtypes in Uniface-10 for code that was not included in the same form in Uniface-9.
Can somebody smarter then me tell me what I'm doing wrong?
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
Uniface 10 increases the granularity of inheritance from container to module, and these defines are to reinstate how v9 did it. To understand how they work, you need to look at how the compiler works when compiling scripts. The relevant steps when compiling the component proc are to collect the script from all levels of the container's inheritance, with the most generic location first and the most specific last. An example result would be
Declarations
; From D_BUTTONS
; From D_BUTTONS2
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
; From D_BUTTONS
#ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
; From D_BUTTON2
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
The precompiled is then processed, resolving all the #directives and removing the #ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL block, as BreakInheritance_ent_D_BUTTONS_P_GENERAL is defined.
Declarations
; From D_BUTTONS
; From D_BUTTONS2
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
; From D_BUTTON2
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
I am not sure what the extra messages are. Do you have an example?
I hope this helps
Mike
------------------------------
Michael Taylor
Rocket Internal - All Brands
------------------------------
Hi Wim,
Uniface 10 increases the granularity of inheritance from container to module, and these defines are to reinstate how v9 did it. To understand how they work, you need to look at how the compiler works when compiling scripts. The relevant steps when compiling the component proc are to collect the script from all levels of the container's inheritance, with the most generic location first and the most specific last. An example result would be
The precompiled is then processed, resolving all the #directives and removing the #ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL block, as BreakInheritance_ent_D_BUTTONS_P_GENERAL is defined.
I am not sure what the extra messages are. Do you have an example?
I hope this helps
Mike
------------------------------
Michael Taylor
Rocket Internal - All Brands
------------------------------
Uniface 10 increases the granularity of inheritance from container to module, and these defines are to reinstate how v9 did it. To understand how they work, you need to look at how the compiler works when compiling scripts. The relevant steps when compiling the component proc are to collect the script from all levels of the container's inheritance, with the most generic location first and the most specific last. An example result would be
Declarations
; From D_BUTTONS
; From D_BUTTONS2
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
; From D_BUTTONS
#ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
; From D_BUTTON2
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
The precompiled is then processed, resolving all the #directives and removing the #ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL block, as BreakInheritance_ent_D_BUTTONS_P_GENERAL is defined.
Declarations
; From D_BUTTONS
; From D_BUTTONS2
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
; From D_BUTTON2
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
I am not sure what the extra messages are. Do you have an example?
I hope this helps
Mike
------------------------------
Michael Taylor
Rocket Internal - All Brands
------------------------------
I could send you the XML's of the primary entity, the functional subtype and the compile listing in which the problem appears. (we use March Hare).
Is that enough?
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
+2- Rocketeer
I could send you the XML's of the primary entity, the functional subtype and the compile listing in which the problem appears. (we use March Hare).
Is that enough?
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
Kind regards,
Mike
------------------------------
Michael Taylor
Rocket Internal - All Brands
------------------------------
Hi Wim,
Uniface 10 increases the granularity of inheritance from container to module, and these defines are to reinstate how v9 did it. To understand how they work, you need to look at how the compiler works when compiling scripts. The relevant steps when compiling the component proc are to collect the script from all levels of the container's inheritance, with the most generic location first and the most specific last. An example result would be
The precompiled is then processed, resolving all the #directives and removing the #ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL block, as BreakInheritance_ent_D_BUTTONS_P_GENERAL is defined.
I am not sure what the extra messages are. Do you have an example?
I hope this helps
Mike
------------------------------
Michael Taylor
Rocket Internal - All Brands
------------------------------
Uniface 10 increases the granularity of inheritance from container to module, and these defines are to reinstate how v9 did it. To understand how they work, you need to look at how the compiler works when compiling scripts. The relevant steps when compiling the component proc are to collect the script from all levels of the container's inheritance, with the most generic location first and the most specific last. An example result would be
Declarations
; From D_BUTTONS
; From D_BUTTONS2
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
; From D_BUTTONS
#ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
; From D_BUTTON2
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
The precompiled is then processed, resolving all the #directives and removing the #ifundefined BreakInheritance_ent_D_BUTTONS_P_GENERAL block, as BreakInheritance_ent_D_BUTTONS_P_GENERAL is defined.
Declarations
; From D_BUTTONS
; From D_BUTTONS2
#define BreakInheritance_ent_D_BUTTONS_P_DUP
#define BreakInheritance_ent_D_BUTTONS_P_GENERAL
Collection Script
; From D_BUTTON2
#ifundefined BreakInheritance_ent_D_BUTTONS2_P_GENERAL
entry lpEntryFrom_D_BUTTONS
end
#endif
I am not sure what the extra messages are. Do you have an example?
I hope this helps
Mike
------------------------------
Michael Taylor
Rocket Internal - All Brands
------------------------------
Trigger <FSCR> from Field: CMDUPDATE.TB2_COPIE.CAL
[ 1] #ifundefined BreakInheritance_fld_TB2_P_DET
[ 7]****** entry lp_update
[ 8] variables
[ 9] string hvfunktie
[ 10] string hvmenu
[ 11] endvariables
[ 12] 1-1 if ($dbocc("WHENT") <= 0)
(LP_UPDATE) warning: 1000 - Entity 'WHENT' not found
[ 13] 2-1 return(-1)
[ 14] 3-1 endif
[ 15] 4 call lp_store
[ 16] 5 hvmenu = $$MENU_ITEMS
[ 17] 6 $$RUNFORM = "WENTU00"
[ 18] 7 call X_MWKCHECK ; alleen uitvoeren als maatwerk is toegestaan
[ 19] 8 hvfunktie = ""
[ 20] 9 $2 = 0
A lot of these extra lines are compiled, all under the same '#ifundefined BreakInheritance_fld_TB2_P_DET'
This code exists in the main entity (which is called TB2), however this code is only used (and modified) when the accompanying button (CMDUPDATE in this case) is painted on the component.
I don't see any #define BreakInheritance_fld_TB2_P_DET' line.
I hope this is enough to determine my problem
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
This is an example of the compiled code in U10, that is not used in U9.
Trigger <FSCR> from Field: CMDUPDATE.TB2_COPIE.CAL
[ 1] #ifundefined BreakInheritance_fld_TB2_P_DET
[ 7]****** entry lp_update
[ 8] variables
[ 9] string hvfunktie
[ 10] string hvmenu
[ 11] endvariables
[ 12] 1-1 if ($dbocc("WHENT") <= 0)
(LP_UPDATE) warning: 1000 - Entity 'WHENT' not found
[ 13] 2-1 return(-1)
[ 14] 3-1 endif
[ 15] 4 call lp_store
[ 16] 5 hvmenu = $$MENU_ITEMS
[ 17] 6 $$RUNFORM = "WENTU00"
[ 18] 7 call X_MWKCHECK ; alleen uitvoeren als maatwerk is toegestaan
[ 19] 8 hvfunktie = ""
[ 20] 9 $2 = 0
A lot of these extra lines are compiled, all under the same '#ifundefined BreakInheritance_fld_TB2_P_DET'
This code exists in the main entity (which is called TB2), however this code is only used (and modified) when the accompanying button (CMDUPDATE in this case) is painted on the component.
I don't see any #define BreakInheritance_fld_TB2_P_DET' line.
I hope this is enough to determine my problem
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
Trigger <FSCR> from Field: CMDUPDATE.TB2_COPIE.CAL
[ 1] #ifundefined BreakInheritance_fld_TB2_P_DET
[ 7]****** entry lp_update
[ 8] variables
[ 9] string hvfunktie
[ 10] string hvmenu
[ 11] endvariables
[ 12] 1-1 if ($dbocc("WHENT") <= 0)
(LP_UPDATE) warning: 1000 - Entity 'WHENT' not found
[ 13] 2-1 return(-1)
[ 14] 3-1 endif
[ 15] 4 call lp_store
[ 16] 5 hvmenu = $$MENU_ITEMS
[ 17] 6 $$RUNFORM = "WENTU00"
[ 18] 7 call X_MWKCHECK ; alleen uitvoeren als maatwerk is toegestaan
[ 19] 8 hvfunktie = ""
[ 20] 9 $2 = 0
A lot of these extra lines are compiled, all under the same '#ifundefined BreakInheritance_fld_TB2_P_DET'
This code exists in the main entity (which is called TB2), however this code is only used (and modified) when the accompanying button (CMDUPDATE in this case) is painted on the component.
I don't see any #define BreakInheritance_fld_TB2_P_DET' line.
I hope this is enough to determine my problem
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
This is the case.
We created in U9 an entity with multiple commandbuttons, each with some default code in the detail-trigger. This is default code that has to be modified when such a commandbutton is painted on a component. If not modified, this code will generate warnings.
For this entity some functional subtypes are created without any changes.
So, the entity contains incorrect code. This is no problem however, because this code is only interpreted when the commandbutton is painted on a component, and of course, the code in the detail trigger is modified. This works fine for the original entity and the subtypes in U9.
That 's different in U10.
It works fine for the original entity, but when a subtypes is used all the code, even for buttons that are not painted, is compiled and generates warnings
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
+2- Rocketeer
Maybe I should refrase the problem.
This is the case.
We created in U9 an entity with multiple commandbuttons, each with some default code in the detail-trigger. This is default code that has to be modified when such a commandbutton is painted on a component. If not modified, this code will generate warnings.
For this entity some functional subtypes are created without any changes.
So, the entity contains incorrect code. This is no problem however, because this code is only interpreted when the commandbutton is painted on a component, and of course, the code in the detail trigger is modified. This works fine for the original entity and the subtypes in U9.
That 's different in U10.
It works fine for the original entity, but when a subtypes is used all the code, even for buttons that are not painted, is compiled and generates warnings
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
This is the case.
We created in U9 an entity with multiple commandbuttons, each with some default code in the detail-trigger. This is default code that has to be modified when such a commandbutton is painted on a component. If not modified, this code will generate warnings.
For this entity some functional subtypes are created without any changes.
So, the entity contains incorrect code. This is no problem however, because this code is only interpreted when the commandbutton is painted on a component, and of course, the code in the detail trigger is modified. This works fine for the original entity and the subtypes in U9.
That 's different in U10.
It works fine for the original entity, but when a subtypes is used all the code, even for buttons that are not painted, is compiled and generates warnings
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
I think need an example to play with to get a clearer picture. Maybe it would be better to log a call with support.
Kind regards,
Mike
------------------------------
Michael Taylor
Rocket Internal - All Brands
------------------------------
This is an example of the compiled code in U10, that is not used in U9.
Trigger <FSCR> from Field: CMDUPDATE.TB2_COPIE.CAL
[ 1] #ifundefined BreakInheritance_fld_TB2_P_DET
[ 7]****** entry lp_update
[ 8] variables
[ 9] string hvfunktie
[ 10] string hvmenu
[ 11] endvariables
[ 12] 1-1 if ($dbocc("WHENT") <= 0)
(LP_UPDATE) warning: 1000 - Entity 'WHENT' not found
[ 13] 2-1 return(-1)
[ 14] 3-1 endif
[ 15] 4 call lp_store
[ 16] 5 hvmenu = $$MENU_ITEMS
[ 17] 6 $$RUNFORM = "WENTU00"
[ 18] 7 call X_MWKCHECK ; alleen uitvoeren als maatwerk is toegestaan
[ 19] 8 hvfunktie = ""
[ 20] 9 $2 = 0
A lot of these extra lines are compiled, all under the same '#ifundefined BreakInheritance_fld_TB2_P_DET'
This code exists in the main entity (which is called TB2), however this code is only used (and modified) when the accompanying button (CMDUPDATE in this case) is painted on the component.
I don't see any #define BreakInheritance_fld_TB2_P_DET' line.
I hope this is enough to determine my problem
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
Trigger <FSCR> from Field: CMDUPDATE.TB2_COPIE.CAL
[ 1] #ifundefined BreakInheritance_fld_TB2_P_DET
[ 7]****** entry lp_update
[ 8] variables
[ 9] string hvfunktie
[ 10] string hvmenu
[ 11] endvariables
[ 12] 1-1 if ($dbocc("WHENT") <= 0)
(LP_UPDATE) warning: 1000 - Entity 'WHENT' not found
[ 13] 2-1 return(-1)
[ 14] 3-1 endif
[ 15] 4 call lp_store
[ 16] 5 hvmenu = $$MENU_ITEMS
[ 17] 6 $$RUNFORM = "WENTU00"
[ 18] 7 call X_MWKCHECK ; alleen uitvoeren als maatwerk is toegestaan
[ 19] 8 hvfunktie = ""
[ 20] 9 $2 = 0
A lot of these extra lines are compiled, all under the same '#ifundefined BreakInheritance_fld_TB2_P_DET'
This code exists in the main entity (which is called TB2), however this code is only used (and modified) when the accompanying button (CMDUPDATE in this case) is painted on the component.
I don't see any #define BreakInheritance_fld_TB2_P_DET' line.
I hope this is enough to determine my problem
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
------------------------------
Wim Van Wijngaarden
CAL Consult Gmbh
------------------------------
Sign up
Already have an account? Login
Welcome to the Rocket Forum!
Please log in or register:
Employee Login | Registration Member Login | RegistrationEnter your E-mail address. We'll send you an e-mail with instructions to reset your password.
77 4th Avenue
Waltham, MA 02451 USA
