Uniface® Forum Home

Uniface 10.3.02 patch 10.3.02.027 available for AS3, AS4, LID, LIF, LU6, RSG, SOB, W32 and W64Uniface 10.3.02 patch 10.3.02.027 has been released and is available for AS3, AS4, LID, LIF, LU6, RSG, SOB, W32 and W64 on Uniface Downloads: https://download.uniface.com/downloads/Uniface/patches/10302/The information about the bug fixes included in 10.3.02.027 can be found on the page with the Patch Listing for release 10.3.02. For documentation updates see the topic “What's New in the Documentation for this Patch (10.3.02.027)” under “Getting Started” in the Uniface Library.Please note that you must have a user account to access the Service Pack on the Uniface Downloads site. To receive an account, you will have to register first. User accounts are currently NOT linked to other Uniface sites such as Uniface.info.

Uniface 9.7.05 patch 9.7.05.040 available for AS3, AS4, HPM, LID, LIF, LU6, RSG, SOB, W32 and W64Uniface 9.7.05 patch 9.7.05.040 has been released and is available for AS3, AS4, HPM, LID, LIF, LU6, RSG, SOB, W32 and W64 on Uniface Downloads: https://download.uniface.com/downloads/Uniface/patches/9705/The information about the bug fixes included in 9.7.05.040 can be found on the page with the Patch Listing for release 9.7.05. Please note that as of Service Pack MG03 (release 9.7.04) the bug fix information will no longer be available in the ReadMe's, but only online. For documentation updates see the topic "What's New in the Documentation for this Patch (9.7.05.040)" under "Getting Started > What's New in Uniface 9 > What's New in Uniface 9.7" in the Uniface Library.Please note that you must have a user account to access the Service Pack on the Uniface Downloads site. To receive an account, you will have to register first. User accounts are currently NOT l

Uniface 9 Third-party Software UsageParts of the Uniface software contain third-party software. Uniface has no liability whatsoever with regards to third-party software.Apache LicenseVersion 2.0, January 2004http://www.apache.org/licenses/TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION1. Definitions."License" shall mean the terms and conditions for use, reproduction,and distribution as defined by Sections 1 through 9 of this document."Licensor" shall mean the copyright owner or entity authorized bythe copyright owner that is granting the License."Legal Entity" shall mean the union of the acting entity and allother entities that control, are controlled by, or are under commoncontrol with that entity. For the purposes of this definition,"control" means (i) the power, direct or indirect, to cause thedirection or management of such entity, whether by contract orotherwise, or (ii) ownership of fifty percent (50%) or more of theoutstanding

Uniface 9 Web related licensesUniface Third-party Software Usage for DSP & mobile applicationsCopyright (c) 2012-2014 Kit Cambridge. http://kitcambridge.be/ Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE

Uniface 10 Web related licensesUniface Third-party Software Usage for DSP & mobile applicationsCopyright (c) 2012-2014 Kit Cambridge. http://kitcambridge.be/ Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE

Uniface 10 Third-party Software UsageParts of the Uniface software contain third-party software. Uniface has no liability whatsoever with regards to third-party software.Apache LicenseVersion 2.0, January 2004http://www.apache.org/licenses/TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION1. Definitions."License" shall mean the terms and conditions for use, reproduction,and distribution as defined by Sections 1 through 9 of this document."Licensor" shall mean the copyright owner or entity authorized bythe copyright owner that is granting the License."Legal Entity" shall mean the union of the acting entity and allother entities that control, are controlled by, or are under commoncontrol with that entity. For the purposes of this definition,"control" means (i) the power, direct or indirect, to cause thedirection or management of such entity, whether by contract orotherwise, or (ii) ownership of fifty percent (50%) or more of theoutstandin

Third-party license information.Uniface distributes third party software for which the following license information is applicable. Uniface version 10Third party licenses Uniface 10 Uniface version 9Third party licensesWeb related licensesUniface version 9 

HelloWe are trying to migrate our application from Uniface 9.7 to 10.3 but we are facing compilation errors in many of our forms ;The problems seems to be linked to inheritance :Our original Form has an entity with specific <Local proc> code in order to bypass the model entity local proc.But after form migration when compiling we get errors because the form has in her module list the model entity local proc that should not have been there;How can we avoid getting the entity default Local Proc in our form ?Any idea ? 🙂

I am trying to run an application in Uniface 9.7.5 installed on a server on the network from a PC. Uniface and the application are installed on the server. On the PC only the Uniface execution command. So far I have not managed to work, it does not find some libraries like (C: \\ Usys9xx \\ commom \\ adm \\ usys.asn)I can't find where it's going to change the route.Any ideas?Thank you

Hi Unifacers,is an HTML5 schema (html5.xsd) available somewhere?I would like to load an html5 page into a struct.Any other hint, tip ... suggestion?Gianni

Hi team,i am hari krishna,i am uniface 9.7 new started developer from india,i started working web component(dsp),for redirecting from one component to another component,i have written codebut that is not updating /workingin details trigger of buttonwebtriggerjavascriptwindows.location.href="componet path"endjavascriptendbut my code is working when i changed my component

Uniface 10.3.02 patch 10.3.02.026 available for AS3, AS4, LID, LIF, LU6, RSG, SOB, W32 and W64Uniface 10.3.02 patch 10.3.02.026 has been released and is available for AS3, AS4, LID, LIF, LU6, RSG, SOB, W32 and W64 on Uniface Downloads: https://download.uniface.com/downloads/Uniface/patches/10302/The information about the bug fixes included in 10.3.02.026 can be found on the page with the Patch Listing for release 10.3.02. For documentation updates see the topic “What's New in the Documentation for this Patch (10.3.02.026)” under “Getting Started” in the Uniface Library.Please note that you must have a user account to access the Service Pack on the Uniface Downloads site. To receive an account, you will have to register first. User accounts are currently NOT linked to other Uniface sites such as Uniface.info.

Uniface 9.7.05 patch 9.7.05.039 available for AS3, AS4, HPK, HPM, LID, LIF, LU6, RSG, SOB, W32 and W64Uniface 9.7.05 patch 9.7.05.039 has been released and is available for AS3, AS4, HPK, HPM, LID, LIF, LU6, RSG, SOB, W32 and W64 on Uniface Downloads: https://download.uniface.com/downloads/Uniface/patches/9705/The information about the bug fixes included in 9.7.05.039 can be found on the page with the Patch Listing for release 9.7.05. Please note that as of Service Pack MG03 (release 9.7.04) the bug fix information will no longer be available in the ReadMe's, but only online. For documentation updates see the topic "What's New in the Documentation for this Patch (9.7.05.039)" under "Getting Started > What's New in Uniface 9 > What's New in Uniface 9.7" in the Uniface Library.Please note that you must have a user account to access the Service Pack on the Uniface Downloads site. To receive an account, you will have to register first. User accounts are curre

Hi FreaksAs we all know, one can define precompiler constants manly in the define-trigger but also elsehere in code.Now I thougt about a tricky "programming"Undefine (or define empty) a constant as an flag in define-triggerElsewhere in code redfine this constant with a value like "1"At the end of compiling catch this constant flag and do somthing with the informationDEFINE-trigger  #define CC_FLAGe.g. LPMX-trigger  #define CC_FLAG 1last-trigger?  #if ('<CC_FLAG>'='1')  #warning at least on trigger fires FLAG  #endif  putitem/id $A_INSTANCE_INFO$,"FLAG","<CC_FLAG>"Actualy I don't know a trigger which is always compile at least.And "worse", do such a trigger hold proccode?Background (an example)I do compile instance-infos into a component local variable which can be read at runtime.In ths variable there are such things as timestamps or a flag, that a programm is declared "obsolete"Now I

Hello,Trying to import keyboard xml fails with message error : "Multiple hits for down entity".Strange message as keyboard layout just contains text and no entity ?An idea ?

Hello,We are trying to migrate our Uniface 9.7 application (Solaris/oracle) to UNIFACE 10 (Solaris/oracle).1) We managed to open UNIFACE 10 IDE but we still have errors (error messages here under) and we don't know where to find those objects (example : prc/$$register@system_library.prc) in UNIFACE 10.Object NOTFOUND   [0] prc/$$register@system_library.prcObject NOTFOUND   [0] rsp/uurepos@eObject NOTFOUND   [0] rsp/uurepos@system_library@e.rspObject NOTFOUND   [0] rsp/ide@usys@e.rspObject NOTFOUND   [0] rsp/ide@system_library@e.rspObject NOTFOUND   [0] fmt/u_multipleselect@usys@e.fmtObject NOTFOUND   [0] men/usys_bar@usys@e.menObject NOTFOUND   [0] rsp/uc_main@eObject NOTFOUND   [0] rsp/uc_props@eObject NOTFOUND   [0] rsp/uc_props@system_library@e.rspObject NOTFOUND   [0] rsp/uumessage@usys@e.rspObject NOTFOUND   [0] rsp/uumessage@system_library@e.rspObject NOTFO

Hi all,In Uniface tree widget has the classic vertical representation but in different circumstances it would be more understandable with a horizontal representation of the nodes of the same level as in this example:Many thanksLuigi

Hello, I have a situation where an URouter is not working because of a licensing error. I have the DLM connected through a separate license server. Is there a way to configure my enviroment and solve this situation?Regards

(updates : we found solutions for the table creation error; I have removed this in the text here under)Hello,We need to migrate our application from Uniface 9.7  to 10.3 (were are also migrating from Solaris & Oracle 12 to Solaris & oracle 19c)For the moment we are just at the begining of our work 🙂 : have installed Uniface 10.3 and changed asn file.We have read in the documentation that we need to create a new repository (we need it on our Oracle 19c DB) as the old one is not compatible anymore.When launching our shortcut to start IDE, somes tables seems to be created in ou DB but it generates a log files with various errors and stop working after few seconds :Object NOTFOUND   [0] prc/$$register@system_library.prcObject NOTFOUND   [0] rsp/uurepos@eObject NOTFOUND   [0] rsp/uurepos@system_library@e.rspObject NOTFOUND   [0] rsp/ide@usys@e.rspObject NOTFOUND   [0] rsp/ide@system_library@e.rspObject NOTFOUND &nbs

Uniface 10.3.02 patch 10.3.02.025 available for AS3, AS4, LID, LIF, LU6, RSG, SOB, W32 and W64Uniface 10.3.02 patch 10.3.02.025 has been released and is available for AS3, AS4, LID, LIF, LU6, RSG, SOB, W32 and W64 on Uniface Downloads: https://download.uniface.com/downloads/Uniface/patches/10302/The information about the bug fixes included in 10.3.02.025 can be found on the page with the Patch Listing for release 10.3.02. For documentation updates see the topic “What's New in the Documentation for this Patch (10.3.02.025)” under “Getting Started” in the Uniface Library.Please note that you must have a user account to access the Service Pack on the Uniface Downloads site. To receive an account, you will have to register first. User accounts are currently NOT linked to other Uniface sites such as Uniface.info.

Uniface 9.7.05 patch 9.7.05.038 available for AS3, AS4, HPK, HPM, LID, LIF, LU6, RSG, SOB, W32 and W64Uniface 9.7.05 patch 9.7.05.038 has been released and is available for AS3, AS4, HPK, HPM, LID, LIF, LU6, RSG, SOB, W32 and W64 on Uniface Downloads: https://download.uniface.com/downloads/Uniface/patches/9705/The information about the bug fixes included in 9.7.05.038 can be found on the page with the Patch Listing for release 9.7.05. Please note that as of Service Pack MG03 (release 9.7.04) the bug fix information will no longer be available in the ReadMe's, but only online. For documentation updates see the topic "What's New in the Documentation for this Patch (9.7.05.038)" under "Getting Started > What's New in Uniface 9 > What's New in Uniface 9.7" in the Uniface Library.Please note that you must have a user account to access the Service Pack on the Uniface Downloads site. To receive an account, you will have to register first. User accounts are curre

By default it's being written to c:\\ which is usually write-protected at our installation.

Hello together,we're just migrating from 9.7.04.02 to 9.7.05.037.In our environment there is an application which sends a message via umsgutil.exe to Uniface. In 9.7.04 all works well. In 9.7.05 either the ASYN is not fired or no message is sent.Interestingly, when I use the old umsgutil.exe from 9.7.04 in the 9.7.05 environment it works. I know, umsgutil.exe has changed with 9.7.05. But I have no idea right now, if I'm running into a bug or if I have to do some further settings. Does anyone can help me?Kind regards,Michael.

Hello together,I would like to know if it is possible to set the color of the grid column headers in the .ini file.Thanks in advance and cheers,Michael.

Is there a Dummies guide to configuring Tomcat to use basic Authentication tokens when using external parties want to consume a Uniface webservice?