Solution I tried copying idf.aps from uniface/components file from my uniface 9.7 to uniface 10, uniface/components (as this folder itself was missing, and didn't had the .aps file for unifacen10.)
Still getting the same error.
While trying to open uniface 10 IDE, getting an error "Failed to activate start up shell screen"? Can anyone please help me out here.
+5Solution I tried copying idf.aps from uniface/components file from my uniface 9.7 to uniface 10, uniface/components (as this folder itself was missing, and didn't had the .aps file for unifacen10.)
Still getting the same error.
It doesn't use the aps file from a folder any more, as uniface has moved to .uar deployment.
I'd be looking at comparing your idf asn file with the one shipped with uniface 10 and understanding the files involved (RESOURCES should include the files below.)
usys:ide.uar
usys:ide_messages.uar
usys:ide_classic.uar
Solution I tried copying idf.aps from uniface/components file from my uniface 9.7 to uniface 10, uniface/components (as this folder itself was missing, and didn't had the .aps file for unifacen10.)
Still getting the same error.
Hi Shubham,
IMHO it is NEVER a reasonable thing to mix objects coming from two major versions.
Your issue is definitively about Standard Deployment, as Iain as already pointed out, AND possible modifications you've applied to your ASN files.
With Standard Deployment you MUST work with .UAR files only; you should NOT address Uniface runtime objects (.frm. .svc, .rpt, ... and so on ...) directly but referring to UAR files containing them into [RESOURCE] section of your ASN file. Each UAR file is containing a pre-defined directory structure.
More info HERE.
Uniface 10 IDE itself is distributed using Standard Deployment.
Hope it helps.
Regards,
Gianni
It doesn't use the aps file from a folder any more, as uniface has moved to .uar deployment.
I'd be looking at comparing your idf asn file with the one shipped with uniface 10 and understanding the files involved (RESOURCES should include the files below.)
usys:ide.uar
usys:ide_messages.uar
usys:ide_classic.uar
Thanks it worked 🙂
It doesn't use the aps file from a folder any more, as uniface has moved to .uar deployment.
I'd be looking at comparing your idf asn file with the one shipped with uniface 10 and understanding the files involved (RESOURCES should include the files below.)
usys:ide.uar
usys:ide_messages.uar
usys:ide_classic.uar
thank you for sharing that include things
I had the same problem
------------------------------
Simone Pecchenino
Labinf Sistemi Srl
IT
------------------------------
Sign up
Already have an account? Login
Welcome to the Rocket Forum!
Please log in or register:
Employee Login | Registration Member Login | RegistrationEnter your E-mail address. We'll send you an e-mail with instructions to reset your password.
77 4th Avenue
Waltham, MA 02451 USA
