Product Forums

Hello, I run this program:       identification division.       program-id. DivideByZeroTest.        environment division.       configuration section.        data division.       working-storage section.       01 ws-vars.           05 ws-zero                  pic 999 value 0.           05 ws-one                   pic 999 value 1.            05 ws-result                pic 999 value 0.       01 ws-tbl.           05 ws-tbl-items             pic 999 occurs 2.       procedure division.      &n

Environ:  UV 11.2.5 on RHEL7I noticed today that when I run 'LIST.READU'  if the locked item ID is longer than 63 characters I see the following The Item ID is truncated visually at the 63rd character The output does not stop at the end of the page After capturing the output via wIntegrate I noticed that the 64th character is actually a control char (so far I have observed char(3), char(4) and char(14) as the truncating character).I also tested using the unix command 'list_readu', as well as the 'LIST.READU INTERNAL' variation.All produced the same result.So is this normal behaviour for the command when dealing with longer Item ID's?Is this as a result of the lock table truncating the ID, or is it just a reporting problem?Is there any significance to the character value at the 64 position in the ItemID?

Hi all,I'm posting the answers to the mvBase and D3 sections of the quiz here. Note that SurveyMonkey doesn't make it easy to share this so you have to scroll through many pages of information just to see the right answers. A lot of the stats are just plain wrong, so focus in on the table at the bottom of each page/question. The green check mark shows the right answer while the table and chart above show the distribution of responses.Thanks again to all who played, and let me know how we can make your future experiences as a forum member even better, whether it be more events like this, specific 'how-to' content, people you want to hear from, etc.Dave ------------------------------Dave AndrewsHead of Customer EngagementRocket Software------------------------------

Yesterday I was using the Unformat and Format all command from the menu. I had used the command "KEY(" and the formatting did not know to indent on the command. Is there a way to add the command "KEY" and have it indent on it?------------------------------Mark LaursenOwner/DeveloperComplete Computing Inc------------------------------

Another prview article about Uniface 10.4 was just published as a blog by Frank Doodeman. This is about TLS for the Urouter Monitor.You can read it here: Uniface 10.4 enhances the Uniface Router Monitor for TLS

Created by Frank Doodeman,  Apr 06, 2021The Uniface Router Monitor is a small but practical Uniface Windows application that you can use to fine-tune parts of your running application. It can monitor the Uniface Router to which it is connected and the Uniface Servers that are using that Uniface Router, as well as the clients that are using those servers. Moreover, it can dynamically change Uniface Router parameters, reload the Uniface Router's assignment file, start and stop Uniface Servers, and stop the Uniface Router.All of this can come in very handy, for example when your application is experiencing problems in the area of response times.This useful tool has been around for quite a while and has proven its worth in application setups that involve TCP connections between the Uniface Router, its Servers, and their clients. The introduction of the new TLS connector in Uniface 10.3 opened up the possibility for more secure connections, so the need arose to upgrade the Router Moni

Uniface 10.4/10.3.03 currency updatesIntroductionHere at the Uniface Lab, we are working towards Uniface 10.4, along with a wrap-up release of 10.3 (10.3.03). As discussed in this blog post, we have several currency item changes planned.The planned changes fall into three categoriesAddition of new support itemsUpdated installation codes allowing the use of updated build toolsets and platforms.Retiring platforms and databases which are no longer supported by their vendors.Below is a list of items affected.New platformsPlatformInstallation CodeCompatibility CodeDocker support RedHat/CentosLIFLIFIBM iSeries, IBM i7.4AS6AS6New DatabasesDatabaseDriver MnemonicDriver versionNotesSQLiteSLEU2.0Updated database version and field datatype mappingUpdated installation codesPlatformCurrent Installation codeNew Installation codeRed Hat Linux Enterprise edition 7.* (x64)LIDLIECentOS 7.* (x64)LIDLIESUSE Linux Enterprise Server 12.* (64-bit)LU6LU7IBM iSeries, IBM i 7.3AS4AS5Retired browsersIn

Hello all, We are having an issue with 27X132 extended view not working. It will work usually the first time after a user sets themselves up for it, but then it will revert to 24X80 view. I have tried to track down the problem. I see something that consistently looks incorrect when the 27X132 view reverts to 24X80. When I right click on the BlueZone icon and "edit with notepad", I see the following: [Session]LU Name="LU002"TN3270 Delay=0x00000064Type Ahead=1Numeric Lock=0AssignLu=0Keep LU on Session Loss=0Custom Rows=54Custom Columns=132Custom Default Rows=24Custom Default Columns=80Alternate Usable Area=0 As you can see, Custom Rows=54 Any idea why this keeps changing to 54? Is this the problem and what can be done about it?------------------------------Michael HlusakQuality AnaylistUSPS------------------------------

Hi, is there still a R for z/OS port distributed by Rocket?regards, Luc

If you missed the MVIS 1.3 live webinar you can now watch the recording and learn about all the new exciting features, announcements and success stories. The webinar features four short videos from @Amey Rokde lead architect of MVIS were you can quickly get an idea of how MVIS can help you expose your MultiValue data and logic as RESTful services and preview the new content in version 1.3: Introduction to creating MV RESTful end points Creating custom APIs with vanity URLs Securing your APIs with OAuth Logging and Monitoring in MVIS ------------------------------Hernando BordaProduct Manager, MultiValue ToolsRocket Software------------------------------

If you missed the MVIS 1.3 live webinar you can now watch the recording and learn about all the new exciting features, announcements and success stories. The webinar features four short videos from @Amey Rokde lead architect of MVIS were you can quickly get an idea of how MVIS can help you expose your MultiValue data and logic as RESTful services and preview the new content in version 1.3: Introduction to creating MV RESTful end points Creating custom APIs with vanity URLs Securing your APIs with OAuth Logging and Monitoring in MVIS ------------------------------Hernando BordaProduct Manager, MultiValue ToolsRocket Software------------------------------

Files from install of xz have strange shebangsHere some examples in bin/ directoryllzcmp:#!/u/tsport/miniconda/bin/bashlzdiff:#!/u/tsport/miniconda/bin/bashlzegrep:#!/u/tsport/miniconda/bin/bashlzfgrep:#!/u/tsport/miniconda/bin/bashlzgrep:#!/u/tsport/miniconda/bin/bashlzless:#!/u/tsport/miniconda/bin/bashlzmore:#!/u/tsport/miniconda/bin/bashxzcmp:#!/u/tsport/miniconda/bin/bashxzdiff:#!/u/tsport/miniconda/bin/bashxzegrep:#!/u/tsport/miniconda/bin/bashxzfgrep:#!/u/tsport/miniconda/bin/bashxzgrep:#!/u/tsport/miniconda/bin/bashxzless:#!/u/tsport/miniconda/bin/bashxzmore:#!/u/tsport/miniconda/bin/bash------------------------------Manfred LotzIBM------------------------------

Monitoring and logging are key features in MVIS to manage and debug your MV REST APIs. Here is short video explaining the monitoring capability of MVIS ------------------------------Amey RokdePrincipal ArchitectRocket Software------------------------------

New in MVIS 1.3 is the support for OAuth 2.0 to integrate with third-party authentication providers and provide token based authorization controls for your REST APIs. Watch this short introduction to learn about the integration. For more details you can watch my full session series on security with MVIS 1.3. ------------------------------Amey RokdePrincipal Architect Rocket Software------------------------------

Vanity URLs is one of the great new features in MVIS 1.3 that gives you full control of your REST end point URLs. Watch this short demo to see how it works. To learn more check out this two part video by @Anand Mirasdar and @Girija Dhole. ------------------------------Amey RokdePrincipal Architect Rocket Software------------------------------​​

I attended the last MV Roadmap session, & it was mentioned that MV BASIC for Visual studio would be released at the end of March.   I would be very interested to try it out, once it is released, so can someone from Rocket please advise once it is available, thanks!MARY MULLANE

Watch this short video and see how easy it is to publish your first MV REST end point using MVIS You can also find an in-depth MVIS demo and introduction in this post. ------------------------------Amey RokdePrincipal ArchitectRocket Software------------------------------

what is the difference between "Server for COBOL" , "Server for SOA"? also the list price? thank...

Last month we announced the release of MVIS 1.3 as well as exciting news for UniVerse and UniData customers with an active maintenance contract. Watch my short video to learn more. ------------------------------Hernando BordaProduct Manager, MultiValue ToolsRocket Software------------------------------

Hi all,I'm posting the answers to the UniData and UniVerse sections of the quiz here. Note that SurveyMonkey doesn't make it easy to share this so you have to scroll through many pages of information just to see the right answers. A lot of the stats are just plain wrong, so focus in on the table at the bottom of each page/question. The green check mark shows the right answer while the table and chart above show the distribution of responses.Thanks again to all who played, and let me know how we can make your future experiences as a forum member even better, whether it be more events like this, specific 'how-to' content, people you want to hear from, etc.Dave ------------------------------Dave AndrewsHead of Customer EngagementRocket Software------------------------------

When we display date time data on our web-page, we have a requirement to remove the seconds, but to preserve the browser locale date format if possible. 'Raw' date time fields appear to display oddly (as UDT format with a 'T' between the date and time etc). How can we code a display format for date/time fields in a DSP which shows them in browser locale $NLS short_datim format? Everything we've tried has given poor results, I'm sure this must be simple, and we're just missing it. ThanksIain

What is the command to find the current version of Aldon on a As400 iSeries?

Sometimes overlooked but if you can't remember a specific command try one of the following. F22=iCluster Cmds -- to give you a section by section breakdown Start typing the command  then add an '*' where you become unsure. For example, I know there's a command to set the metadata owner....DMSET* gives: Select Command Type options, press Enter. 1=Select Opt Command Library Text DMSETAPOBJ ICLUSTER Rocket iCluster internal use only DMSETMSTR ICLUSTER iCluster Set Metadata Owner DMSETPOS ICLUSTER iCluster Set Journal Position DMSETPRIM ICLUSTER iCluster Prepare Primary DMSETSVAL ICLUSTER iCluster System Values DMSETSYNC ICLUSTER iCluster Set Sync Point DMSETTRACE ICLUSTER Configure diagnostic tracing Bingo!------------------------------d broadbridgeRocket Software------------------------------

Hi. Brian Cram here on behalf of @Tim Rude and myself. On March 30th and 31st Tim and I are going to be taking you on a complete tutorial on Hot Backup and Safe Snapshotting for D3/Unix. This will include five videos: 1) Safe Snapshotting of D3/Unix, 2) Doing a Small Save/Restore, 3) Hot Backup Configuration, 4) Hot Backup Monitoring and Debugging,  and 5) Resynchronizing Hot Backup."Small Save/Restore? What is that?" you may ask. It's a simple technique that streamlines the save and restore process. Curious? Cool! Here's a sneak peak at the Small Save/Restore process: See you on the 30th or 31st. Bring your friends.------------------------------Brian S. CramSenior Technical Support EngineerRocket Software------------------------------

Thanks for the replies Yunpu & Christian, I can now see the .rmv directory, & I've been able to configure my Server connection details OK.MARY------------------------------Mary MullaneAnalyst/ProgrammerEBOS GroupMelbourne Australia------------------------------