Product Forums

A) When you do have proc code on entity/field-level, the sidebar shows only operations/triggers.Please could also the local procs displayed here.Yes, they are (also) at componentg level But there is a reason why the proc code was written at LPME level: Structure and clarity :-) B) In UF 9 you could switch between layout => procode and UnifAce  automatically opens the appropriate proc-containerWould be nice to have too in UF 10Why: Sometimes it is easier to find a field on  the "surface" then in a deep nested structure list Ingo------------------------------Ingo StillerAareon Deutschland GmbH------------------------------

Hello Rocket Community Hoping you can help. We use Wintegrate emulator for our Dealer Management solution. Has been in production for over 5 years. Was working fine yesterday, today user is not able to download xlsx files to folder. Can download text, csv etc, via same executable and folder destinations. Message displayed is: There was an error during the transfer: Unable to open or create local file. Message is displayed after clicking OK on folder where file is to be stored to. We have had this happen to 3 computers, 2 some time back, a 3rd computer today. User is able to save and open / access the folder and files in the folder, error exists in Wintegrate only. Thank you in advance.

As Rocket's MV evangelist, I'm starting a discussion. What are you thinking or doing with AI around your MV app?------------------------------Mike RajkowskiMultiValue Product EvangelistRocket Internal - All Brands US------------------------------

We are on RMCobol v 12.17 32 bit. We are trying to make sure that LCS can read Environment Variables from a Windows Machine to be used by code. Code should successfully read the following 2 environment variables HOMEDRIVE HOMEPATH Code should concatenate those 2 values, and code should then be able to use that single value as the new location to be used instead of any hardcoded references to the current drive.  I am trying to find the function code for the GetFirmwareEnvironmentVariableExA function.  Do either of you have any idea where I can find this? Is it available in 12.17?        GetPrivateProfileInt code is WF03A        GetPrivateProfileString code is WF03B.        GetFirmwareEnvironmentVariableExA?

Found a new file in D3 that you need to keep an eye on: DM,ERRORS,END. This file gets an entry every time you END a phantom job from TCL. A friend of mine had a VME crash because there were over a million items in that file. If you END a lot of phantoms from TCL, you're probably headed in the same direction. Best solution is to turn off the logging to do that, you'll need to set up a config item in the DICT of the DM,ERRORS, file and fix a bug in one of our subroutines. The bug has been reported and will be fixed in a later release of D3. First the subroutine: DM,BP, END.SUB: You need to flip lines 63 and 64: 063 end064 if logit = 0 then outNoLog = 1 should be: 063  if logit = 0 then outNoLog = 1064 end Then COMPILE DM,BP, END.SUB (O Then create this item in the DICT DM,ERRORS, file:   config.end001002003 logging=off This will turn off logging. You can now do a CLEAR-FILE DM,ERRORS,END and get on with your life. ------------------------------Brian S. CramPrincipal Technical Support Eng

I have several customers both on UV and on D3 that have programs that send email. AT is using OLE to talk to outlook.This has stopped working the second the new outlook was forced on my customers. Any assistance would be appreciated.This is the code that Pete sent me years ago that was working       SUBROUTINE AT.SEND.EMAIL.OUTLOOK(ADDRESS, SUBJECT, MESSAGE, ATTACH)*  ADDRESS:  recipient's email address*  SUBJECT:  one-line email subject*  MESSAGE:  multi-line email message (lines separated by AM)*  ATTACH:   optional attachment file name      EQU AM TO CHAR(254), VM TO CHAR(253), SVM TO CHAR(252)      EQU ESC TO CHAR(27), STX TO CHAR(2), CR TO CHAR(13)      EQU EM TO CHAR(25)      SCRIPT = ''*Create our object variables      CALL SAVE.SCREEN('AT')      CRT @(0,20):@(-3):"You have called Outlook to send emails. Remember to say 'Allow' to permi

Hello,We would like to set up a mobile application. We followed the document written by Jason: https://www.rocketsoftware.com/sites/default/files/resource_files/Rocket_Uniface_MobileAppBuilder_Whitepaper_Oct2021_v5.pdf Option 1 with the use of external resources works well.  However, we're encountering a major session management problem with option 2. This method uses internal resources.In fact, for EACH ACTION (e.g. clicking on a button with a "Public Web"), the session number is modified. Whereas the session number is only supposed to be renewed after 30 minutes of inactivity. Maintaining the session number is imperative, as it enables us to store information. Ex: the logged-in user.The session number ($item("SESSION", $webinfo("WEBSERVERCONTEXT"))) does not change when the same DSP is opened with a web browser or with the cell phone with external resources. Do you know what could be causing this change in behavior?  Deployment environment :Windows 11Cordova 12SDK 34JDK 19Gradle 7.6

Hello everyone. In a computer with two monitors, is there any way to select through code in AcuBench 8.0 which monitor to display the screen on? Thank you.

Hi, every one I'm having an issue with an Acucobol application where the error shown in the attached photos appears. This error only occurs for one user who connects to the application using an Android tablet and a remote desktop client. The rest of the users who connect to the application via terminal service do not experience this problem, so I believe it must be something related to the tablet's connection. If anyone could provide me with some information regarding this, I would greatly appreciate it. Thank you very much.

möchte über ein Programm Midimap aufrufen, das Ausgabvegerät wählen und dorthin Daten schicken.

Recently new rmcobol licence installed and after that when I try to create SOAP style sheets (xsd, xsl etc) recompiling exisiting programs (no changes were made), I get error. So I tried to test as per the document here page 22 - https://www.microfocus.com/documentation/rm-cobol/10/xmltk10.pdf. Program - getstarted.cbl Identification Division.Program-Id. Getting-Started.Data Division.Working-Storage Section.01 Customer-Address.02 Name Pic X(128).02 Address-1 Pic X(128).02 Address-2 Pic X(128).02 Address-3.03 City Pic X(64).03 State Pic X(2).03 Zip Pic 9(5) Binary. then I give - rmcobol getstarted.cbl y  - which runs fine then I give - cobtoxml getstarted customer-address -bv Cobol Object File: /test/getstarted.cobCobol Data Item Name: customer-addressXML Document Names: /test/getstarted.[xsd,xsl,xtl]Options - Schema: XSDError: 12[0] - data item - not found[12] Is there any environment changes needed after installing new rmcobol licence?  In the same p

It seems that whenever I reboot my Windows PC, the Unidata database 8.2 and the Unidata 8.2 Telnet services are both 'disabled'. I use CCleaner and McAfee anti virus. Could it be that one of these is doing it. Or perhaps something else. Anyone got a clue on this one?

Patch 10.4.02-051 Downloads Product availability Matrix (PAM)Downloads of this patch are available from the Rocket Customer Support Portal.Further explanation can be found here. New Feature(s) The maximum number of characters allowed for Entry Formats, RegEx or Syntax string, in Field Syntax Definitions is extended to 192.  Note that the total number of characters used for Field Syntax definitions can not exceed 192 characters. Label position property can now be set using the IDE Widget Property form for UX Widgets: TextField, NumberField, TextArea and Select. It is advised to use the patch installer to upgrade your current installation so that you'll end up with the correct ini files. The IDE's Code Editor auto-complete suggestions will no longer be accepted using the "Enter" key, suggestions can still beauto-filled using the "Tab" key. The use of the "Enter" key for auto-completion can be re-activated by setting CompletionOnEnter=true in your '.ini' file, under the us

I have a GUI app that loads a delimited file into the AccuTerm GUI data grid. In the grid designer I only have one column and that one column is resizeable.  When I load multiple  columns by sending it a multi-valued header with multi-sub-valued data lines, the column widths all default to the same size. I notice that I can resize each individual by double clicking the separator on the header line. My question is, can I send a command to tell the GUI runtime to resize all the columns based on the data?  Some of these files have 50+ columns so having to double click each one is tedious. I'd rather just have them automatically all set to fit.

Hello, everyone! I'm looking for experience passing information between the go language (golang) and jBASE, particularly direct connection examples between scripting languages such as jBC. Thanks! Lamont------------------------------Lamont LockwoodIntegration ExpertDallas, Texasl2@integrationexpert.com------------------------------

New to this so please bear with me... I am trying to use 'submitrequest' for the first time to pull contact from a URL. Below is what I have thus far but it doesn't appear to be working. Does anyone have experience doing this? If I manually use the URL in a browser, it works. When i try in a program, it doesn't. 001: URL = "https://trison-dev.myxcarrier.com/ECSAPI/Labels/275926435770.txt"002: HTTP.STATUS=''003: TIME.OUT='3000'004: RESP.DATA=""005: RESP.HEADER = ""006:007: RESP = createRequest(URL,'GET',HTTP.HANDLER)008: CRT "Reponse to create request = ":RESP009: RESP = submitRequest(HTTP.HANDLER,TIME.OUT,'',RESP.HEADER,RESP.DATA,HTTP.STATUS)010: CRT RESP011: CRT "HTTP.STATUS - ":HTTP.STATUS I ran the test and received the following: :TEST.HTTPSReponse to create request = 00HTTP.STATUS - 400ýBad Request

Hi, Is there anyone successfully monitoring pool users. That is using the LISTUSER command or any other utility. I can see in LISTUSER the USRTYPE column displays pooled but which account is it connecting to. This is UNIDATA 8.3.1------------------------------[Darren] [Johnson] [Australia][Snr Dev Engineer][Indue][Brisbane] [QLD] [Australia]------------------------------

I am using an FD that has multiple record types.  They are all the same length and each has a 'WHEN' directive identifying the type of record.  When a record is displayed using Alfred (or SQL View), the first record's field mapping is used.  I believe that the documentation states that the first record (or the largest record) is defaulted for mapping the data columns.  This default does not map correctly when there is a different record type - except for "V" for some reason.  Is there a way around this?  Maybe a combination of other XFD directives?  Is there an error in how this is defined? Any suggestions would be greatly appreciated!  FD record definitions: *(( XFD WHEN XREF-RECORD-TYPE = "X" )) 01 ITEM-XREF-PART-RECORD. 05 ITEM-XREF-PART-KEY. 10 XREF-RECORD-TYPE PIC X(01). 10 XREF-NUMBER PIC X(30). 05 XREF-OUR-STK-ALT-KEY. 10 XREF-OUR-STK-NO PIC X(15).

We're encouraged by the interest we're seeing in our new Rocket DevOps portal. The latest version 10.2.0 was just released with additional features and expanded support for DevOps test and we thought we'd reshare the previous links from a few quick application walkthrough demos on YouTube ! Included are quick reviews of some of these highlighted features  (shown in previous version 10.1.3). Create, edit, view, report test cases Extract & obfuscate test data from production systems Record and playback interactive sessions Submit & monitor batch jobs Review results (Extending test plans) Execute and monitor remote commands on IBM i, Windows, and Linux systems In addition, for some of our RDOi  (formerly LMi) users, I'm calling out a few items above that should be helpful in regression testing after promoting Tasks/Objects with RDOi (or LMi or our RDi Plugin).For the Test cases, it may be best to keep the tests small/discreet. For example, after promoting code to ITG or QUA, qu

Hi All, I'm trying to get an EDA setup for one of the files in an account. However, whenever I try to open the dictionary in the EDA, it freezes and then crashes after 10 or so minutes. I've upped the memory allocation to the eclipse.ini to 4G as before it would give me a HEAP error. I'm not sure what else to do to troubleshoot this. I'm using the latest version of the DBTools package. Thanks, Mark------------------------------Mark JohnsonData EngineerRocket Forum Shared Account------------------------------

Hi UnifAce Just  transfering a few entities frim UF 9 to UF 10 (10.4.2.0-049On the UF10 side I have to add a few "functional subtypes", so I open the entity and the drag&drop a  "subtype entity" to the super entityNo problem up to this pointNow I try to rename the new sub-entity and run in this error (see below)This happens only for a few new sub-entities.I could not reproduce this error with further entities, strange ...Ingo ==============  Exception log  [13-jun-24 09:17:02]  =================  Error       : -100000  Description : Parameter pUriList requires value(s)  Context     : [context] = ""   Callstack   :     Component     Instance        Type  Proc Container  Proc Module  Line Nr                                  Code    ---------     --------        ----  --------------  -----------  -------                                  ----    UC_MAIN       UC_MAIN         .     OPR                          operation MC_GETSELECTSTRUCTFROMURILIST  17    return (THROWCODINGEXCEPTION(

Already tried both the 16 Alphanumeric / Serial numbers sent from email and the downloaded .XML file , same error  Visual COBOL Product License ERROR #VisualCOBOL

Recently new rmcobol licence installed and after that when I try to create SOAP style sheets (xsd, xsl etc) recompiling exisiting programs (no changes were made), I get error. So I tried to test as per the document here page 22 - https://www.microfocus.com/documentation/rm-cobol/10/xmltk10.pdf. Program - getstarted.cbl Identification Division. Program-Id. Getting-Started. Data Division. Working-Storage Section. 01 Customer-Address. 02 Name Pic X(128). 02 Address-1 Pic X(128). 02 Address-2 Pic X(128). 02 Address-3. 03 City Pic X(64). 03 State Pic X(2). 03 Zip Pic 9(5) Binary. then I give - rmcobol getstarted.cbl y  - which runs fine then I give - cobtoxml getstarted customer-address -bv Cobol Object File: /test/getstarted.cob Cobol Data Item Name: customer-address XML Document Names: /test/getstarted.[xsd,xsl,xtl] Options - Schema: XSDError: 12[0] - data item - not found[12] Is there any environment changes needed after installing new rmcobol licence?&nbsp

Hi FreaksNow that the biggest obstacles have been cleared away, I can take a closer look at the newer UnifAce versions.And I found this "10.4.02.045  :Feature: Format ProcScript, indentation corrections on entire code document"But how to activate?I'm selection a few line of code and use right mouse click:Not a single hint about formatting. I have also added the [userkeys] to our INI and USYS.INI: Nothing happens. What else needs to be activated for the formatting to work?BTW: I did upgrade UnifAce 10.4.2.0-018 to UnifAce 10.4.2.0-49 but just simple copying the UnifAce-PatchTIA Ingo------------------------------Ingo StillerAareon Deutschland GmbH------------------------------

Hi all, We are migrating Uniface from 10.3 to 10.4. After installing of all the Tomcat Webservice is not Running. After start of the service it is active for a while (maybe 30seconds) and  then stops itself. Server is Windows Server 2019 Standard. In the log is no errors to see: Even in the eventviewer we can't find anytrhing. Does someone knows why the service is stopped? Kindly regards, Erhan ------------------------------Erhan GunbulutSogeti Nederland B.V.------------------------------