Product Forums

Hi Unifacers, we can't figure why in SOME installation we have hundreds and hundreds of userver.log files in customer servers, created every day already tryed to add or remove putmesslogfile, add or remove ioprint, add ioprint=0.. if we specify a different putmesslogfile name in ASN we can see them correctly renamed but thet're still there.. if we don't specify a filename then we get those hundreds of userver (+ PID) .log anyone else/idea? thank you Simone------------------------------Simone PeccheninoLabinf Sistemi Srl IT------------------------------

I am running Unidata 8.1.2. In one of my accounts if I try to get down to unix or use sftp or scp I get the following message :!suNo permission to escape to shell This used to work everywhere one the server and now it is only in this account that it happens and I am not sure why.  Any thoughts on what I can check?------------------------------L IvebluesRetiredRocket Forum Shared Account------------------------------

I assume Git has been tested on a z/OS 3.1 system but I am having an issue with performing "git add ." and the only difference I can find is that I'm attempting to do it on a z/OS 3.1 system. This is what I get when issuing git add . fatal: can't add "zGIT-DS-Attributes": file is tagged, set corresponding zos-working-tree-encoding attribute or reset file tag This is correct, the file is tagged IBM-1047 as seen here: $ ls -lT                                                                                    total 2                                                                                                         drwxr-xr-x   2 AUZZ04S  #KYNDRYL       0 Apr 30 00:00 Z-GIT             t IBM-1047    T=on  -rw-------   1 AUZZ04S  #KYNDRYL      23 Apr 30 00:00 zGIT-DS-Attributes The repository does have a attributes defined as follows: $ cat .git/info/attributes | iconv -f ISO8859-1 -t IBM-1047               #                                                                         # Def

I have a script that we use to verify file integrity across a number of accounts using guide.  A couple things I'd like to add are warnings about file size for 32-bit files (which we can get from udt.errlog but we have no control over when things show up there) and to run guide_ndx on a file to validate indexes.  Also, because guide_ndx has to be run on individual files (it still has to run on individual files, right?) I need some way in Linux to know which files in an account are Unidata files and which files have indexes.   Are there any Linux utilities in Unidata 8 that could give me this kind of detail on a file without starting Unidata?

Hi.  I have an old version of unzip that I downloaded years ago.  I'm working with a file now and when trying to unzip it I get the error messages:Archive:  Bill.zip                                                      skipping: DT052024.txt            need PK compat. v4.5 (can do v2.1)    skipping: DM052024.txt            need PK compat. v4.5 (can do v2.1)I was hoping to download a newer version of unzip, but I'm having trouble understanding the miniconda process.  I do not have access to the internet from my z/OS lpars, so, is it possible to get a repo (or the unzip package) downloaded locally?thanks, Dan------------------------------Dan SmithCrc RepresentativeState Farm Insurance CompanyBloomington IL US------------------------------

I have a program that does a bunch of initial stuff, but at the end, writes a JSON (text) file to a UniData DIR file called JSON.ARCHIVE with a date-time stamp.  It then does a chmod on the new file, setting permissions to 666.  Finally, it selects all the records  (files) in JSON.ARCHIVE that are older than 35 days and deletes them, thus it is self-cleaning. For some reason, the writes and deletes have stopped working.  I do not get an error, and the delete counter increments, but when I LIST JSON.ARCHIVE, my new record is not there and the old ones were not deleted. Permissions on the Linux dir are drwxrwxrwx, and all the files within are -rw-rw-rw-. For argument's sake, we have three accounts: DEV, PILOT and LIVE.  The programs are all the same and had not been compiled since I rolled the programs out.  It still works in DEV but no longer in PILOT or LIVE.  To be sure, I re-compiled DEV - it still worked.  I copied the working program from DEV

Users can hit our MX Web 10.4.2 installation and have device names automatically assigned, but that's not the desired behavior since our host application makes extensive use of pre-configured device names. We know how to pass a DeviceName via a URL parm, but our users are resistant to saving a bookmark or typing the parm. I would like to let users click a button on our logon page to switch their device. I'm able to use the EmulatorConnect function to switch to their specified device but users don't want to do this every time they visit. We need to make their device "sticky" so it's remembered from session to session on that machine. <insert annoyed grumbling about users here> A browser's LocalStorage is accessible via JavaScript, and I thought that might be an option for making the device name sticky.  User hits our base URL and gets auto-assigned QPADEVxxxxxx User switches to their device via EmulatorConnect....say, MIKEPRT App writes DeviceName to LocalStorage All subsequent

Is there any configuration in Unidata that can be adjusted for when a file starts emitting these messages into the udt.errlog?  Seems I've seen this start to appear at different times, but I've never seen a configuration option for it.

Can anyone recommend a test-to-pdf conversion program that I can run at the command line? - Bob------------------------------Bob ThomsonPresidentSynapse Computer Solutions IncSan Rafael CA US------------------------------

My Universe 11.4.1 system started doing this today. If I'm in a running program and hit Ctl-C I get the break option menu. If I select "D" I get this: Break: Option (A,C,L,Q,D,?) =DAbnormal termination of UniVerse.Fault type is 11.  Layer type is BASIC run machine.Fault occurred in BASIC program GET.PY.FILE at address 8 It happens with every program. If I start the program with RAID instead of RUN it works. It wasn't doing this yesterday and I've rebooted the system but that didn't affect it. Does anyone have any idea where to look to fix it?------------------------------Joe GoldthwaiteConsultantPhoenix AZ US------------------------------

Hi allSo, we're on Linux 10.x and it's great - HOWEVER: Is there a way we can tell the update processor to flash compile (as opposed to just compile) code?Generally, one would exit and compile using Ctl XCJust asking My client is still using System Builder 5.1 (don't laugh) and there is an option to call a program in the dictionary (correlative field):CALL MYPROGRAMThe interesting this is that this still functions (calling the program etc) but it takes a LOOOONG time to run.If one does a 'list filname mydictvar' then it's OK speed; however select filename mydictvar - takes forever!Any clues? One last point - has anyone out there got the System Builder source code? If so, I'd really like to connect with you. Thanks ------------------------------Stefano GallottaManaging MemberSimply Red Open SystemsMilnerton ZA------------------------------

Patch 10.4.02-048 Downloads Product availability Matrix (PAM) Downloads of this patch are available from the Rocket Customer Support Portal. Further explanation can be found here. New Feature(s)The $server_secret assignment setting is now also used to protect occurrence IDs that are passed between DSP client and server.Using the new $dsp_fieldlist assignment setting, DSP communication can be made to include all fields in the component's Field List. See the user documentation for more information.A new Entry format REX(Regex) is available when defining field format on forms and DSP's. The REX(Regex) with a particular regular expression pattern is used to format the data in the field.A new function for regular expression $regex is available for converting a string to a regex string. The regex string is a group of characters and regex codes enclosed in forward slash marks that can be used to match a string with a particular regex pattern. The $regex can be used in $ltrim, $rtr

I am stepping through code and to avoid long subroutine calls, I do a  "BLnnnn"  in the BASIC Debugger where nnnn is a line after the subroutine call I want to 'blip through' -- more often than not now, the BL command is met with a minidump: I have altered the code a little to avoid anything proprietary -- but this is the gist... I did not want to step into the subroutine at line 1031. SO ... I reasonably put in BL1032 which should catch me right after the routine comes back: But instead..... .L [1024]        SOMETHING<2>    = COMPANY.NO:@VM:INVOICE.NO [1025]        SOMETHING<2,-1> = INTERNAL.USER.ID:@VM:"":@VM:"1" [1026]        SOMETHING<8> = BATCH.NO ; SOMETHING<9> = "POST" (1027)        IF DEBUG.FLAG THEN [1028]          IF ( DO.A.DEBUG ) THEN SOMETHING<1,-1> = "$VDEBUG" [1029]          PRINT "Calling routine to DETERMINE.OUTPUT.DEVICE ..." [1030]        END    [1031]        CALL DETERMINE.THE.DEVICE(REPORT.NAME, COMPANY.NO,SOMETHING) [1032]        I

Have created a utility in Universe which calls python script using PyCallFunction.  Python script is creating the https connection and posting the request. This is where the Universe aborts and we receive the error: Fault type is 11. Layer type is BASIC run machine. Any possible solution to resolve this issue?------------------------------Shubham NigamRocket Forum Shared Account------------------------------

Hi I have a script that connects to my Unidata database and executes some commands. The script was working ok with UOPY 1.3.0 and Python 3.8. I just updated to Python 3.12, and I cannot connect anymore. I keep getting Error [81009] : The RPC failed I started to trace back, and I found the following: Python 3.8 -> Works Python 3.9 -> Works Python 3.10 -> Not Working Python 3.11 -> Not Working Python 3.12 -> Not Working I couldn't find the official version of Python that UOPY supports, so I wondered if 3.9 is the one. Any ideas?  Regards

Attached you'll see two jpgs of the same file generated by my software using D3 Linux 10.3 and Accuterm 7. The bottom file was received by the Thunderbird email client. The top file was received by the Yahoo email client. The Thunderbird client and another MS product have also received the files as Chinese characters. The actual file that my software generates and then emails in the body of the email is the Yahoo file. Why, pray tell,  is this happening and ONLY with this customer's system? None of my other customers are having this problem. UPDATED: Changed the logo to GIF instead of a JPG and everything is working just fine. ------------------------------Richard GinsburgPresidentGinsburg ConsultingMiddleburg VA US------------------------------

I've been setting up a new machine using Universe 11 and Centos 7 as the host OS and AccuTerm 7.3.2034.0. The Universe programs are all working but I've been having trouble with WED.  When I try to edit certain files it just locks up. The WED editor displays but with nothing open. If I click on it i get "A request to the MultiValue database server is pending....  Clicking on OK just re-displays the message.  The only way out is to click on the cancel button on the Server Mode status window. Once I click on that WED shows a message "The requested operation could not be completed: server not running".  I can click on that and WED goes away but the AccuTerm session is locked up. If I reset the terminal I can get back to TCL. I've tried everything I can think of to  fix it: I've checked all the terminal and stty settings.  I've tried installing older versions of AccuTerm I've tried to re-install the host programs, (That no longer works) I've tried moving the

Hi, I used Oracle Linux on my last 2 servers as I needed to build them after Centos had "died" but before Rocket had  certified Alma  & Rocky. I need to build another server and would like opinions as to which is better to go for, and why - Rocky or Alma?! Also any potential gotchas with either of them. Thanks in advance Tom------------------------------Tom PowerOwnerPower Business SystemsBenoni ZA------------------------------

HiI'm putting a short question here before addressing license management.I tried to update my "Uniface 10.4.02.021 Distribution". As the newest distribution complained about my license, I tried some older distributions.It looks that I'm able to update to "Uniface 10.4.02.024 Distribution", but after that it starts to complain about the license.Has someone else noticed this? Is this something that will often happen, ie. the license has to be updated within the same Uniface version (eg. 10.4.02) ? In our development environment we are using a local licence file, (On-premises standalone licensing) Regards RogerW.Error: Could not obtain a license.Reason: Your license does not allow you to run this version of Uniface.Resolution: Contact your Uniface sales representative to acquire an updated license.Checkout of license feature UW10;UWALL;UW32 failed, reason:License File: 210018 - No license code is available for feature UW10 ver 10.03.Fatal error: 8011 - A license could not be acquired for

Dear All, Presently we are using RMCOBOL 85 with 44 user license in SCO UNIX Server , so is it possible to move that license to Ubuntu linux Server ,  Any one please suggest the process  Thank you Saiteja N 8121676979 saiteja.edu@gmail.com #linuxcobol#license#COBOL#RM/COBOL#unix#SCO

Hello Team, I am Currently in RM COBOL With ISAM File. We don't want to Use the ISAM Files anymore , So with Visual COBOL Migration How we can upgrade the ISAM File to Store in Database any RDBMS. Do you have any Tools or capabilities in VS COBOL which will directly connect to the RDBMS.  Please share a training video if you have.. Thanks.. #COBOLVISUALCOBOLMIGRATION

When Linux got rid of xinetd in version 9, changes had to be made to D3, particularly in the area of telnet listeners. This includes turnkey telnet (telnet to Linux and get a D3 login prompt instead of a Linux login prompt), nailed telnet (a range of TCP ports that each connect to a specific PIB instead of the next available PIB), as well as the MVSP telnet listener, typically on TCP port 9000. systemd replaced the xinded functionality and is now used by D3 to set up these listeners. Now that D3 over Linux version 9 has been out for a while, it has come to our attention that there are some things missing from D3's systemd configuration which is causing some D3 and Linux stability issues. We are currently working to get formal patches out to mitigate these issues. Meanwhile, the fixes we are implementing are listed below and can be implemented manually to alleviate the problem while we're waiting for the formal patches. ______D3 Turnkey Telnet Service______ To fix a standard D3 telnet l

Had some code doing strange things.  This is the example:      IF VAR1 = "UNKNOWN" THEN *   CALL SEND.EMAIL(ORDER.NO)   do other things      There was no END statement.  My best guess was that U2 considered the "*" at the end as a NULL and allowed it to compile. Does anyone know? We changed it to be the following to solve the problem.      IF VAR1 = "UNKNOWN" THEN       CALL SEND.EMAIL(ORDER.NO)       END   do other things      ------------------------------Nelson SchrothpresidentC3CompleteShop LLCHarrison OH US------------------------------

How is ti possible to add chart elements as axes, axis title, chart title, data lable, data table, legend with macro recorder i had become following commands in vba ActiveChart.Legend.LegendEntries(1).Select ActiveChart.FullSeriesCollection(1).Name = "=""2021""" ActiveChart.FullSeriesCollection(1).Values = "=Tabelle1!$A$1:$A$5" ActiveChart.FullSeriesCollection(2).Name = "=""2022""" ActiveChart.FullSeriesCollection(2).Values = "=Tabelle1!$B$2:$B$5" ActiveChart.FullSeriesCollection(3).Name = "=""2023""" ActiveChart.FullSeriesCollection(2).Values = "=Tabelle1!$C$1:$C$5" in msexcel.cpy i found the following commands Method: "getLegend". 01 Legend Legend. invoke returning Legend. Method: "getChartTitle". 01 ChartTitle ChartTitle. invoke returning ChartTitle. Method: "ApplyDataLabels". 01 Type-CBL XlDataLabelsType. 01 LegendKey VARIANT.

Hello, I wanted to ask if there is a possibility to use the zmf-explorer Extension in VS-Code and parallel the zowe-explorer.Zowe Profiles use a tokenValue, while ZMF Profiles use User and Password. I tried to make nested profiles, which works half. If I logon with authentication token in zowe, i am able to connect, but if I then try to logon in zmf, it asks the base profile username and password, and add it afterwards to the baseprofile, even though I didn't specify that the base profile should use username and password, instead only a tokenvalue.In the Profile itself I added "secure: ["user", "password"]" but it asks me nevertheless. in the CLI I can execute commands, but I don't get any answer back: PS S:\\> zowe zmf get pg PS S:\\>in the CLI there is the workaround to create a second baseprofile and specify every time which baseProfile to use, which works, but is't the solution I'd like to use long term.{ "$schema": "./zowe.schema.json", "profiles": {