Rocket MultiValue

Hello all, wondering if anyone had any luck uploading to Amazon S3 using UniBasic/UniData.The requirement is to call Amazon S3 HTTP REST API directly in UniBasic, using AWS Signature Version 4. Are there any samples out there we can use?Thanks------------------------------Pedro RochaRunnerTechBoca Raton FL US------------------------------

Have a new Red Hat Linux 4.18 server running UniVerse 11.3 Using the XAdmin 4.13 but getting error message "No RPC COnnection active" when trying to connect.  Confirmed that the unirpc is running and that the port is open and listening.  Did to know what else is mssing.------------------------------K MhunterResolution Provider LLCWASILLA AK US------------------------------

The MVS Toolkit is our REST services tool for D3 and mvBase. MVSP is the MultiValue Server Protocol that the Toolkit uses to connect to D3 and mvBase. Want to learn more? In just under 90 minutes you can learn all about installation, configuration, and debugging of MVSP and the MVS Toolkit. Even better – you can spend only a few minutes a day. I just made over a dozen short, easy to consume videos. So, you can watch one when you have only a few minutes. Before you know it, you'll have learned a lot.I've tried ot summarize my years of Toolkit experience into this series of videos, sharing best practices and other knowledge I have on the subject. I put them in order to make the series easier to follow and easier to skip subjects you may already have mastered. Ready to watch the first one? If so, click here to get to the playlist on the Rocket Software YouTube channel and make sure you have approximately 3 minutes!Hopefully this video series will help you understand the tools better and h

Morning,I have never used callx and think I have found a need.  From my understanding a callx will trigger a program on a item change.  Not sure if it can be triggered from a attribute change but a item change would be ok.Question is,  How do you go about setting it up and making it work?  Thanks------------------------------Craig CurtisSystem ProgrammerSevier Valley School DistrictRichfield UT US------------------------------

I am looking at setting up new hardware and was wondering if there is a plan to support RHEL 9 anytime soon?------------------------------Steve CaspersMurphy Automotive IncRosemount MN US------------------------------

The 11.3 user reference keyword section shows LPTR [n]. Most occurrences of appropriate command section instances only show the keyword LPTR. I guess you need to find the keyword section to know there is an optional printer channel number. Recently updated commands like LIST.INDEX, however, show the optional printer number. Does this mean that the documentation is going to evolve for all commands that allow LPTR will also show the optional printer channel?As an experiment, get into UniVerse, and immediately issue the command LIST VOC LPTR 3. It sends the output to the spooler. My recollection is that the command would complain about channel 3 not set up. Of course that recollection goes back over 30 years. Is the behavior to use print channel 0 if the requested one is not set up?Speaking of LIST.INDEX, "-INFORMME"? A curious choice for a command line option beyond -INFORM. Is the hyphen a signal that the INFORMME will not be found as a keyword in the VOC file? Unless this is a new addi

I was talking to a would-be large client about MVIS tools but I had no idea if it could scale. They will be doing about 250K to 1000K transactions daily. I am not sure how MVIS can do this.Is there anyone out in this universe, pun intended, that can say they have done this, and how?Posted 08-27-2022 11:46------------------------------Doug AverchOwnerU2Logic------------------------------

We run Windows D3, and utilise MVS Toolkit extensively. It's a very stable and useful product, but there is always a three-second timespan between the request and response within the server (shown in the log).Does anyone know of a way to reduce this time, as it can make things quite slow when numerous requests are made? It doesn't seem to be a network-related issue.Many thanks in advance.------------------------------Simon HawkinsGeneral ManagerQueanbeyan Leagues ClubQueanbeyan NSW AU------------------------------

I have a couple of programs that select .pdf files based on the key of a record in the bridge file. Most of these keys are numeric with a hyphen, i.e. 123-01. Left of the dash is the road number and to the right a sequential number for the bridge. One of the roads got split by annexation and a left over section of road 84 was made 84A and contained a bridge, 84A-01. PERFORM "SSELECT BRGDOC WITH @ID LIKE ":BRGKEY:"..." has worked great until this bridge. From TCL to get the document list SSELECT BRGDOC WITH @ID LIKE "'BRGKEY'..." is the format that works. To do this from a PERFORM I need 3 sets of quotes and I haven't been able to come up with a working statement. Does anyone have a suggestion?

We're pleased to announce the availability of Rocket® MV BASIC for Visual Studio Code (VS Code) v1.7.0, which will let you preview debugging capabilities for UniData and UniVerse! Rocket MV BASIC for VS Code (MVVS) offers features to help your developers modernize, simplify, and work more productively in one of the most popular development environments, Microsoft Visual Studio Code. By detecting and analyzing errors in your BASIC code, the Debugging feature makes it easy for you and your team to debug and fix BASIC programs. The 1.7.0 Debugging feature is considered an MVP (Minimal Viable Product) and we will continue to enhance and refine it over a series of releases. Supported MVP Debugging Operations when the extension is connected to a UniData or UniVerse server: Break Point Continue Step-In, Out, Over Stop            *Debugging MVP Limitations: Only supported on UniData 8.2.4, UniVerse 11.3.4 and 12.1.1 Step-in may terminate debugging session Sometimes unable to step-out a

The Rocket MultiValue team is very excited to announce the release of UniData 8.2.4 on August 18th, 2022.  The UniData 8.2.4 maintenance release provides a wealth of enhancements and bug fixes as well as the highly anticipated MV BASIC for VS Code debugger preview. Debugging is now easier with UniData 8.2.4.  Your developers will love the changes we made in UniData 8.2.4 to support your team's use of the UniDebugger with the MV BASIC for VS Code (MVVS) v1.7.0 extension.  We're releasing 8.2.4 in conjunction with the MVVS v1.7.0 extension, available for free on the Visual Studio Code Marketplace.  Rocket MV BASIC for VS Code empowers your BASIC developers to edit, compile, and now debug your BASIC applications in one of the most popular development environments, Microsoft Visual Studio Code.  You can review the MV BASIC for VS Code v1.7.0 release announcement on the MVVS Rocket Forum for details including the MVVS Debugger platform support matrix. In addition to MVVS debugging, UniData

Hello Everyone,We have a old application which is using UNIOBJECTSLib. We are in a process to migrate to new U2.Data.Client, so created a webservice application which should return UniObjects such as new UniDynArray or UniRecord.Is there anyway I can return the UniDynArray or UniRecord objects from the webservice(.asmx) project.I tried it but I am getting issues, UniDynArray has no parameterless constructor. Can I get a help on this.If I cannot return these objects, how can I achieve this as I wanted to do a minimalist changes to my old application.Thanks,Sandeep------------------------------Sandeep KumarConsultantRocket Forum Shared Account------------------------------

UniData version 8.2.4 has been released on August 17 2022 for the below platforms/versions:AIX POWER       7.1,  7.2AlmaLinux       8Amazon Linux       2CentOS       7,  8HP/UX ITANIUM       11.31Oracle Enterprise Linux x86       7,  8RedHat Enterprise Linux Intel       7,  8Rocky Linux       8Solaris SPARC       11SuSE Linux Enterprise Server Intel       12.0,  15.0Windows       Windows 10 (Creators Update Supported),  Windows 11,  2012 (R2),  2016,  2019,  2022This product is available to order immediately via your Rocket software provider or by logging into your RBC account at https://rbc.rocketsoftware.com or https://rbcint.rocketsoftware.com.Additional Product Information is available on the Product Availability Matrix at https://rbc.rocketsoftware.com/matrix.asp or htt

I've inherited thousands of programs, most of which are no longer being used. Even worse the programs are all scattered into about 80 different program files. Your basic nightmare.Does anyone know a way, on Universe, to tell when the last time a program was executed is? The cataloging features are not usually employed here, although there are some, so anything that looks for a catalogue date is probably not going to help me much - but if there is a way to see when catalogued programs were last run as well that could help some.If there is nothing available to help me here - any suggestions on how to create a log of what's being used? Obviously I could move all the programs into an archived file and wait for my users to scream but that's not helpful to my company :(Thanks in advance for the info / suggestions. Hoping to get this place cleaned up but it's gonna take a LONG time!Kathleen------------------------------Kathleen HambrickProgrammer at Colwell------------------------------

Thanks for the reply. The only reason that I was considering chromebook is for the price but reading the article that you attatched is seems like a lot of work and iffy at best.I guess I’ll just save-up my money and buy a regular windows laptop.Regards,Kevin Hond

Hi All ,I've downloaded the trial version of the connector. I want to connect to our universe 11.2.5 with that one.We have installed the U2ODBC 32bit & 64 bit. Did a test connection in Tableau it passed but when we click on OK, it gives an error. The error code is A73B8869.The error is saying something about missing driver.Please assist.Thanks. ------------------------------Roland KayverCore Banking SupportTeachers Savings and Loan Society Limited------------------------------

Just started a position at Houston's Inc which uses D3. Apparently, sometimes they are setting group locks and other times they set item locks. However, no one seems to know why it does one over the other. The D3 handbook is unclear. We are trying to remove the group locks from happening as they really should only be item locks within their applications. The manual states that the typical readu, matreadu, etc create the locks. But there is no info on how a group is created vs the item...or perhaps both are created at the same time, but the group lock is released sooner? Looking for a way to identify when the code is generating a group lock instead of an item lock so that we can switch to item locks only.------------------------------Chris RazzanoSenior PICK programmerRocket Forum Shared Account------------------------------

Hi All - I am trying to figure out how to get accuterm ftd to create an xlsx instead of an xls. Anyone know the answer to this?Thanks!------------------------------Kathleen HambrickProgrammer at Colwell------------------------------

Has anyone out there successfully integrated a credit card mag stripe reader with D3? Looking for something that you swipe a credit card and the information is captured using a BASIC INPUT statement as if the information had been typed on the keyboard. I see a few USB mag stripe readers out there on Amazon, but can't tell if they emulate keyboard input. If you're using one that works, please let me know the make, model, and source.------------------------------Brian S. CramPrincipal Technical Support EngineerRocket Software------------------------------

Hi, Do you know where I can have detail about a U2ConnectionException ? Error I get from sbxa when trying to connect ? Many thanks for any help. Manu ()[SBXA.SBPlusAppServer.dll,SbPlusRuntimeService.SbAppConnect(0)] }{Failed to open connection to luluvpdb2541/E:\\INTEGRIX\\UVDB\\START using LU\\kmaus:SBXA.AppServer.U2OpenConnectionException:[193AG]-12    at SBXA.AppServer.U2Connection.OpenConnection()------------------------------manu fernandes------------------------------

Hi Guys,Maybe I'm missing something but does D3 (10.3) not have the raise (lower) function to alter @Vm to @Am (or vice versa) ?I guess one could use the swap function but I've been working with Open Insight and ​"miss" this :)------------------------------Stefano GallottaManaging MemberSimply Red Open SystemsMilnerton ZA------------------------------

After installing as root, are there any options for running Unidata as aless-privileged service account? I'm working with a customer that forsecurity reasons does not want the main unidata processes running as root,and they're pointing out that Oracle, Apache HTTP, Postgres and many otherserver-side services have the ability to run under non-user accounts.I don't think it's possible, and haven't seen anything in the docs (thoughthere is a hint that it's possible for UV, running as a user uvadm,https://rbc.rocketsoftware.com/downloads/readme/UV-11.3.3.pdf?16:05)Thanks for any experiences, both positive and negative!Ian

Hi all,Just wondered if anyone has tried this or may know the answer. I have gzipped files in unix and I am trying to send these via a http POST, but having issues. I've tested via postman, so know it's something I am doing wrong.I have added 'Content-Type application/json", and "Content-Encoding gzip" to the header, and read in the file to use as the payload, but get the following when checking the response header:  ------------------------------Simon WoolfallSenior Software EngineerRocket Forum Shared AccountBELFAST GB------------------------------

Hi All ,We currently manually run retrieve sentence to pick up reports from universe 11.2.5 and AIX 7.2 Can we use scheduler to automate it ?Or anything to automate it .Please assist. ------------------------------Roland KayverCore Banking SupportTeachers Savings and Loan Society Limited------------------------------

good morning folks!does anyone in this group have a standardized test plan they use when upgrading RHEL/Linux in general that they can share?if not a plan, testing suggestions?THX,~doc------------------------------[Doc] [Ruckel][IT Guy][Southwest Traders][Temecula] [CA] [USA][Doc]------------------------------