Product Forums

Hello everyone, I wanted to share my experience with installing gzip user Miniconda under the /bin directory. After the installation, I noticed that both gunzip and gzip are available in the /bin directory. However, I've encountered an interesting behavior: to unzip a file using gunzip , I need to initiate a bash interactive shell with the command bash -i , after which I can successfully use gunzip filename.txt.gz to unzip the file. On the other hand, I can use gzip -d filename.txt.gz to unzip the file without needing to enter the interactive shell. Has anyone else experienced this? If so, do you have any insights or solutions to avoid using bash -i for gunzip? I would appreciate any advice or tips! Note: both file gzip and gunzip under /prd/mini/envs/zoss/bin Thank you!------------------------------Raju Shrestha------------------------------

Hello, I am currently working on creating a CentOS Steam 10 installation (latest) with the latest version of UV available as of this post (14.1.1.xx) The installation runs but there are many errors that complain about EGREP not being supported so grep -E is automatically being substituted and after the installation gets to "Installing default Global Basic..." there are thousands of VOC LIB errors. Some things that I learned from the installation is that libnsl and libxcrypt-compat are required to even begin it. Perhaps there are other requirements that are not listed in the basic docs that are "assumed" to be installed on a from scratch OS installation that I need to install? Just want to cover my basis before reverting down one level (CentOS Stream 9) due to the installer just not working. Usually, it's a me problem :) Thank you in advance!

So, you’ve got questions? Well, we’ve got answers! Whether you're wondering how to make the most out of your product or just need a little help, don’t be shy—pop into the community and ask away. Our team is ready to share their knowledge. Go ahead, fire away, and let’s keep the good vibes (and answers) rolling! 🚀------------------------------Martyna UleviciuteCustomer Community Managermuleviciute@rocketsoftware.com------------------------------

So, you’ve got questions? Well, we’ve got answers! Whether you're wondering how to make the most out of your product or just need a little help, don’t be shy—pop into the community and ask away. Our team is ready to share their knowledge. Go ahead, fire away, and let’s keep the good vibes (and answers) rolling! 🚀------------------------------Martyna UleviciuteCustomer Community Managermuleviciute@rocketsoftware.com------------------------------

Hello - I'm running the debugger on a unidata program and need to set a variable to null. I remember there is a way to do this but do not remember how. I know you can always set a variable to a value through the \\ command...but to set to null. I'm remembering something like save or sv...can't quite remember.  Can anyone help here? Kathleen------------------------------kathleen hambrickProgrammerRocket Forum Shared Account------------------------------

Hope everyone's doing great! Popping in with a gentle reminder: Set your notification preferences to stay in the know (My Profile → My Account → Forum Notifications). Please feel free to reach out with any questions. I look forward to seeing you in the community!------------------------------Martyna UleviciuteCustomer Community Managermuleviciute@rocketsoftware.com------------------------------

Hi Team, We have several customers in APAC who are actively paying yearly maintenance renewals, however, they are in unsupported versions (as low as version 3). We have now at least 2 customers (both in version 3) who are planning to upgrade to the latest version and asking how licensing will work during the upgrade process/project, which, depending on the complexity of the application may take 3 to 9 months. Our sales and presales team are divided on how to approach this. Sales, of course wants some license revenue out of this. To resolve, we found this link Micro Focus Business Support Agreement to guide us on the proper resolution. Based from this, we found the below statements: Highlighted in yellow, there is a clause that the current version that customer is using should not extend beyond the 'End of Support' period of that version. In this case the current version under support is only v7 till v10, so v3 is already end of support even if they are paying maintenance for the entit

Greetings, all!Environment - UV 11.3.5 on AIX 7.2 Whenever we stop and restart UV, the current logs in $uvhome get saved into the $uvhome/saved_logs folder.  It's not just a straight copy, though.  It appears that the current values get appended to the end of the respective files that were already in saved_logs, but it also appears that some of the information from the front ends of the existing saved_logs files gets removed.  Is there documentation somewhere that says how these files are managed?  Are each of the log files handled the same, or is each managed according to its own unique set of rules?  Are these rules configurable by us? Some of these files can get fairly large, so we're looking to be able to predict/manage what is going to happen, as well as ensure the sizing of the associated filesystem is correct.Thank you!------------------------------Brian Paige------------------------------

We are upgrading from V827 to V831. (And I might add without Lalitha who is out on extended leave...) We have completed the code merges for our customizations applied to the upgraded skels/panels/REXX/messages. However, when we tested a build, our loadlib was not included in the concatenation. We have resolved that specific issue (updating the CMN$$JBL skel to include it for our &ZMFCTST), but that led us to ask the question "Are we doing customizations correctly?" We can continue to plow through comparing pre-upgrade skels to post-upgrade, but wonder if there is a better approach. Is it possible to get an hour consultation on upgrading to V831? We have followed the migration guide, and have a conversion-day playbook that we followed. However, I think we need more of an upgrade best practices discussion - at a Bob Yates level (not developer technical, but more detailed than a list of features). ------------------------------Jim HaworthTechnology EngineerNationwide Mutual Insurance

Hi All, Does anyone know what is the situation with OpenQM?  We were in the throws of migrating to OpenQM (from mvBase) when it was owned and distributed by Zumasys. Since Rocket bought the product , the product seems to have gone in to hibernation.  Are OpenQM VARs concerned about the future of OpenQM? ------------------------------Richard OldsDirectorCalidore LtdUKrichard@calidore.comwww.caldiore.co.uk------------------------------

A warm welcome to everyone coming in from other sub-forums, or joining us freshly! Since we're starting anew in this sub-forum, let's get to know each other. Introduce yourself in this thread. Use this simple template: 1️⃣ Your name and role 2️⃣ What brought you to the community 3️⃣ An industry trend or topic you’re following closely Engage with others —take a moment to read and respond to other members’ posts. You never know what connections you’ll spark!  While you’re at it, update your profile—add a profile picture, share your interests, and industry. It’s a great way to connect with fellow experts and build your network. This is your community, and I bet there will be amazing collaborations that grow from these connections. Thanks for being here! ------------------------------Martyna UleviciuteCustomer Community Managermuleviciute@rocketsoftware.com------------------------------

Many of the companies I’ve worked with on automation are now expanding the scope of automation beyond IT and application workflows. They're pushing deeper into business units, actively identifying processes ripe for automation. A key focus in these efforts is understanding how to trigger automation effectively. What's the event that sets it in motion? How do we integrate these triggers into our systems? Today, processes are initiated by system notifications,  file arrivals, or other standard events. But one area with huge potential is automation triggered by humans - informed decisions made by people who stay in the loop. This on-demand, ad-hoc automation, where a human initiates or interacts with the process at a key step, is an essential piece of the puzzle for achieving pervasive or hyper-automation.  Think about workflows like onboarding new staff, offboarding, password resets, report generation, or approval processes. Many of these start with a human interaction or require a criti

How can I install NetExpress 5.1 on Windows 11?  When I try I get an error message "Error 2878.  On the dialog PreReqs the control PreReqList has a possible value:  Either Microsoft Windows XP Service Pack 1 or later, Microsoft Windows 2000 Service Pack 4 or later, Microsoft Windows NT 4.0 Service Pack 6 or later, Microsoft Windows 2003 Ser ..." Do I need a new version of the software - and if so where do I get it from?  Or is there a way of cheating the system by copying a few files from an XP or Windows 7 PC onto the Windows 11 PC? I am assuming it is possible to run NetExpress 5.1 development IDE on Windows 11? Many thanks, Phil------------------------------Phil HicklingDeveloperRocket Forum Shared Account------------------------------

This post will be about the Operations Screen – what you can see on it and what it can do for you. When you go to the Operations screen you can see what’s happening in today’s production schedule. Jobs can be monitored and managed with capability to hold, cancel, release, and perform other operations. Relevant run-time information is also available here, for you to drill down into. For example, milestones that are authored to alert when SLAs are at risk, can be monitored and managed here. See below example of the Operations Screen in Zeke Web Server Upgrading to the Zeke Web Server is free ------------------------------Olivia SultanovSolution Marketing ManagerRocket Forum Shared Account------------------------------

Rocket iCluster will stop working properly on IBM i V7R4 and V7R5 when IBM PTF SJ03017 is installed.   Background: The parameters of the QUSLOBJ API have been changed in PTF SJ03017 which causes the iCluster command DMMRKPOS to fail. Affected iCluster versions: All Guidance: Do not install PTF SJ03017 until iCluster is patched Fixed in version: iCluster 9.3.1 (scheduled for May 2025)   If you are using an older version than 9.3 or you need an immediate fix please contact Rocket Support Team.   My apologies  for the inconveniences that this PTF could cause.   Regards, Harald Braeunlich------------------------------Harald BraeunlichSenior Product Manager------------------------------

Using Rocket TE VT v10.2.1.4761, I do not have hotspots enabled at all.  However, whenever I type a long string of numbers with a minus sign or a dot in the middle, the emulator displays it as "xxxxxxxxxx".  For example "1234567890-1234567890" displays as "1234567XXXXXXX4567890". How do I disable this?------------------------------Jeff AllenSelf RegisteredWayne NJ US------------------------------

I was at a breakpoint in my managed code program and I was looking at the properties listed for a menu strip.  One of them was "DisplayedItems" with a heart shaped icon beside it.  It is a collection and I can see the items in the collection at the breakpoint.  I would very much like to use the information in this collection in my program but that property is not available to my program.  Why not?  If my menu strip is too wide to see in my window, I would like to increase the width of my window.  This collection would tell me if any of the menu items are not displayed.  ------------------------------Lee RobinsonSoftware Development ManagerNew Hampshire Admin Office of the CourtsConcord NH US------------------------------

We are looking to move forward with upgrading from AIX 7.2 to 7.3 and would like to make sure there are no issues with the Agents that we currently run on the boxes. Any input would be greatly appreciated.

Hello, I've looked online, and from what I can tell: there's no information on either of the question. We've run into an issue where a call is issued, but the operation is terminated or cancelled, but there's no way to signal the same to UniVerse. The other problem we've is: we "believe" we're hitting the maximum connections allowed, which leads to delayed responses on the front end as the call "waits" for the connection to become available again. I wonder is there a way to check the connection availability ahead of time, instead of just sitting there. Thank you!

Hello, For Uniface 10.3.2.: Which Java version do you need (at least)? Does it only work with Tomcat 9 at most, or also with Tomcat 10.1? For Uniface 10.4: Which Java version do you need (at least)? Does it work with Tomcat 10.1? If so, is wrd.jar from Uniface 10.4 compatible with the Uniface 10.3 urouter? (The documentation claims that an application web server for Servlet 6.0 (i.e. Tomcat 10.1, for example) should work. But I looked in the wrd.jar from my Uniface 10.4 installation, and it only seems to be compatible with Tomcat 9 (background: Tomcat 10.1 implements the JakartaEE namespace, Tomcat 9 still uses JavaEE) ).Many thanks in advanced------------------------------Hendrik SchmidtBayerische VersorgungskammerMünchen DE------------------------------

As Rocket's MV evangelist, I'm starting a discussion. What are you thinking or doing with AI around your MV app?------------------------------Mike RajkowskiMultiValue Product EvangelistRocket Internal - All Brands US------------------------------

Jeannette Shea September 17, 2024 Introducing a new e-learning module covering Rocket MVIS, the MultiValue Integration Server. MVIS, a tool for Rocket® UniVerse and Rocket® UniData® customers, that will help you extend business opportunities, expand your workforce with new developers, and get products to market faster. MVIS allows you to easily expose both your MV data and business logic as RESTful APIs. These new APIs allow you to extend existing apps and create new ones using emerging frameworks and languages, which will keep your MultiValue application relevant. Take a look at our customer’s success with MVIS in these case studies: Tailored Brands - Building a Modern Experience with Rocket® UniVerse SMC - Maximizing ERP Investment by Modernizing with MVIS During the e-learning module, you’ll create an API in your own personal Virtual Lab. You’ll learn how: To create endpoints for files and subroutines and how to call these endpoints. To install and configure MVIS. OpenTelemetry

Paul Chang June 6, 2018 Overview Microsoft SQL Server Integration Services (SSIS) is a platform for building high performance data integration solutions, including extraction, transformation, and load (ETL) packages for data warehousing. It can transfer UniData or UniVerse data to SQL Server very easily. If you use a uci connection to access a UniData or UniVerse server, you must normalize your account first with proper schema and permission settings. The U2 Toolkit client also provides a native connection option that does not require normalization. However, the result data set is very different from a uci connection. The users might need to make some adjustment for SQL Server tables. In this blog post, you will learn how to use Visual Studio (VS) 2017 SSIS Designer using .NET Framework 4.6 to create a simple Microsoft SQL Server Integration Services package. The sample package will export UniData file data into a SQL Server table using a native connection. Note You need to register y

Kathy Larson July 12, 2023 We’re pleased to announce the release of Rocket® AccuTerm® 8.1, an established terminal emulator for MultiValue applications. To improve its functionality and security, Rocket AccuTerm 8.1 now offers a seamless single sign-on experience, a true web version (i.e., with no hosted dependencies on Rocket Software) with features that match its desktop counterpart, and adherence to the industry's leading software security standards, including Synopsys Black Duck, Polaris, and VeraCode. These advancements mark a step forward for MultiValue terminal emulation, empowering users with enhanced productivity, accessibility, and ease of use. Single Sign-On With the release of 8.1, Rocket has recognized the importance of simplifying AccuTerm user access and security. The implementation of single sign-on (SSO) eliminates the need for multiple login credentials, providing a seamless experience between Windows desktops and MultiValue systems. With SSO, users can connect to Mu

Hey everyone, Just a quick reminder that our anonymous survey is still open! If you haven’t had a chance to share your thoughts yet, now’s the perfect time. Your feedback helps us improve the Rocket Software Forum—what’s working, what’s not, and what we can do to make this space even better for you. Whether you’ve been active or just browsing, your voice matters! ➡️ Take survey here Thanks to everyone who’s already participated—I truly appreciate it! And if you haven’t yet, I’d love to hear from you. 🚀------------------------------Martyna UleviciuteCustomer Community Managermuleviciute@rocketsoftware.com------------------------------