Rocket MultiValue

I am on Universe. I get the following message when I try to delete a file.  "unable to unlink the operationg ssytem file" then it lists the file name. Then it follows with "DELETE failure". What does this mean and what can be done about it?------------------------------Konson GeeProgrammerLiahona Development SolutionsBonney Lake, WA, United States------------------------------

it comes with openssl 1.1.1n  it is possible to update the openssl version by: replace the version in udt version sym link to another version  update the path so it find the redhat version first some other way/suggestion that I am not aware of and will this break anything in udt? thanks dougc ------------------------------Doug ChancoUniverse ProgrammerSelf Registeredgraham NC US------------------------------

I believe I was told that when upgrading UDT from a previous version maybe 8.2.x to 8.2.4 its possible to update the license programmatically? currently we have to use confprod A message displays: You have 10 days to call U2 before UniData stops working.  5.      Type Ctrl+F to generate the configuration code.  6.      Copy the generated configuration code to the clipboard; it will be used to obtain the authorization from the vendor in the next section.  Note:   Consider saving a copy of the configuration code in a text file such as Notepad.    Obtain an Authorization Code  UniData is owned by Rocket Software. No log in is required to obtain a product authorization code.  Use this link to authorize UniData: https://u2tc.rocketsoftware.com/authprod.asp  2.      Read and follow the instructions on the web page.  3.      On the Rocket Web page, change the Select Product dropdown box to UniData and click Continue.  4.      Enter your eight-digit serial number, which is the license numbe

Good day, I'm supporting a IBM Power AIX environment, which I have been working with for about a year. Along with sorting out the general maintenance of the systems and moving to AIX 7.2 there is a large UniVerse environment on the hardware I support. So I've done a little reading, as I didn't build these environments, about recommend tuning. I couldn't find anything specific, so along with what I've found, I wanted to see if there was anything else I could do or look into. We have a number of test environments, and servers that I can build to test these things on.I have found some mention of tuning JFS, first was check the type of filesystem mount, if CIO enabled disable it. Then set 'ioo -p -o j2_dynamicBufferPreallocation=64'. I've also seen mention that j2_nPagesPerWriteBehindCluster should be changed from the default 32 to zero I have some ideas of things I might like to try and see if they made a difference, setting the  "/usr/sbin/syncd 60 > /dev/null 2>&1 &" defa

Have a quick question. In JED, what is the hot key to enter a TM (char 251) into a record? The VM and SVM are clearly documented. In Universe in ED i would just go into Up Arrow Mode  and change it there, but does not seem Up Arrow Mode is supported in ED on Jbase. Editing this in HEX does not seem supportable and I'd rather not have to create a user interface for this for a super user. I do see it's supported through RAISE() and LOWER(), so it should be there. Also see that @TM is supported. ------------------------------Greg MotterRocket Forum Shared Account------------------------------

I have a client that runs a 24/7 application on UniVerse (11.3.2).  They are conscientious about keeping their files well sized.  Several years ago they tried the CONCURRENT option on RESIZE and got badly burned when they ended up with corrupted files and lost data.  They have been very gun shy about using CONCURRENT since then.  Has anyone resized UniVerse files with the CONCURRENT option recently?  Is it stable now or is it still a crap shoot on the end result?  If you use it, what is the performance impact?------------------------------Steve Murray-WolfOwnerRocket Forum Shared AccountFirestone CO US------------------------------

Hello! what is the procedures to open a ticket on stand by?  We are upgrading Unidata AIX from a server to the cloud  for a critical software over a weekend and want to be assured that there will be support incase we have issues.  Thanks------------------------------Peter GonzalezSt. Louis, MO US------------------------------

Rocket MV BASIC for VS Code 2.2.0 features highly stable and performance debugging Yunpu Zhao September 26, 2026 We're excited to introduce everyone to v 2.2.0 of Rocket MV BASIC for Visual Studio Code. We've added a new debugging feature that significantly improves performance and stability using gRPC and related technologies. (Currently compatible only with UniVerse 11.4.1's Windows / Linux versions.) Implementation of Previous Debugging In v1.6.0, we initially introduced debugging. This feature communicated with the MV Server using UOJ+UniRpc. We sent debugging command-line instructions (CLI) to the MV Server and retrieved the results as strings, which represented the execution outcome of the CLI instructions. Decoding these strings was necessary to obtain the required debugging data but process had a lot of room for improvement. Introducing gRPC gRPC is a modern open-source remote procedure call (RPC) framework that efficiently connects services within and outside data centers, o

We have a number of PHP pages that access QM on another server.   Our response time is slow by my standards. we have added some pretty significant logging to our process. We know the pageload time in PHP, we know the time for the function call to QM, and we know the QM response time. We getting some variability in response time as well with no patter that we can see. Our OpenQM server is in Azure and running on W2019. Our web server is on a private server running Apach and linux. we are using our url name and port 8280 as normal http://web.xyz.com:8280/api/ we are seeing times of 1.723 seconds to get the function and pageload in PHP. The QM side takes 8ms . we have been looking that the flush time on MVCONNECT, this seems to make no appreciable difference. we are off checking to make sure nothing on the windows server is grabbing this, such as virus checker or something. we down to internet time. Looking for suggestions on best practices.  Should we make a private tunnel from linux to

Hi Again, I am trying to change the background color of an ITEM , it has FORGROUND and BACKGROUND options in its PROPERTIES when looked at in ACCUTERM. So I am assuming that they can be changed on the "fly" durring use of the form. Here is what I have tried so far           CALL ATGUISETPROP(GUIAPP,GUIFRM,'COMBCUST',GPITEMS,0,0,CUST.LIST,GUIERRORS,GUISTATE)*         RGBCOLOR = 102 + 255*256 + 102*65536*         RGBCOLOR = "Green"*         RGBCOLOR = 102:@SVM:255:@SVM:102         RGBCOLOR = "102,255,102"         CALL ATGUISETITEMPROP(GUIAPP,GUIFRM,'COMBCUST',GPBACKCOLOR,0,0,RGBCOLOR,GUIERRORS,GUISTATE)         IF GUIERRORS<1> >=2 THEN GOTO GUI.ERROR         CALL ATGUISHOW(GUIAPP,GUIFRM,"COMBCUST","",GUIERRORS,GUISTATE)         CALL ATGUIACTIVATE(GUIAPP,GUIFRM,'COMBCUST',GUIERRORS,GUISTATE)         IF GUIERRORS<1> >=2 THEN GOTO GUI.ERROR         It always aborts , as you can see I have tried the RGB raw number, a generic name as used in the Properties drop down, the num

Hi,  am now using Accuterm well but am stumped by the the resulting functionality of the  Combo Box. Lets say the combo Box is waiting for a request and the user enters a Name (as requested)   BAXTER  I then search the Customers file and find 21. When I have created a list and loaded it, how do I make the list shown on the screen so that the user knows that their search request has a result. I realise that the user could simply press the "down arrow" but I would prefer to show them the first 8 items to indicate that the selection is ready for picking  I hope this makes sense. Blessings Chris Baxter------------------------------Chris BAXTERMDCB SoftIPSWICH GB------------------------------

Any U2 Basic program utility available to import JSON object into a dynamic array or Name-Value pair? I expect the U2 program to accept a JSON object as an input, and a list of Variable names to parsed from the JSON object. The output could be a name-value pair.------------------------------suresh anbilOwnerOHM Systems IncCincinnati OH US------------------------------

Has anyone else experienced this?   Since the move to UniData 8.2.4 Build 3003, I cannot use the "BL"  (Break at Line) in the UniBASIC Debugger without getting a mini dump for my troubles. I am unclear if I've just gotten really unlucky, or if something is not working as expected in this build. I have the team I work with opening a case, but wanted to see if this is something that is just my miserable luck, or if something is not quite right. It pretty consistently tells me I have an 'Access violation.  Attempted to 'read from address 0xFFFFFFFF'  ------------------------------David WolvertonIndependentSunset Programming IncWaltham MA US------------------------------

This was highlighted to me by the Director of Development as a feature when we were shipping UniVerse 4.4.4. The command syntax is: verb [DICT] filename [records | FROM list#] … where verb is among 18 options including CHECKSUM, COUNT, and LIST. Do we care if the file name can be almost anywhere in the query? Do we want to advertise this feature in the documentation? Should we just follow the documentation which wants [DICT] filename first? Is this for compatibility with some legacy multivalue environment? Is this capability simply a side effect of the lex/parse implementation? Does anyone do things like the following?: LIST DICT F1 VOC (Split DICT and filename) LIST F1 DICT MD (Filename after fields) LIST VOC DICT (At least this does NOT work – if DICT is not a dictionary field) Thoughts? ------------------------------Mark A BaldridgePrincipal ConsultantThought MirrorNacogdoches, Texas United States------------------------------

As a discussion starter, I'd like to throw out a few wish list items that would be helpful in our environment and, I assume, might be helpful to others:1. Block commentsThere are times when it would be very helpful to have the capability to use block comments. In BASIC programs, using a 'IFDEF()' sort of works but this capability should be available in all source code environments, e.g., BASIC programs, procs, paragraphs, etc. This would allow using markdown for documentation and would simplify program maintenance and management.2. Default text file typeFiles using Type 1 and Type 19 are intended for storing text data. Type 1 is a throwback (way back) to old Pick capabilities and, on current systems (Linux or other) is just another piece of tedium to deal with. I would like to suggest a configuration item that would indicate the type of file to use for standard text files. So, if a new account is created, those system files (like &SAVEDLISTS&) would be created as Type 19, rathe

hello there, I have used Accuterm and Unibasic for the last 4 months, and I used the basic and standard toolboxes from Accuterm 8. That looks like old vintage themes, For Example, I want the input field with the curve edges as well as buttons, and more. So, I want to create a better user interface for my application.is there any alternative or any ideas? Any information you can provide would be highly appreciated. Thank you in advance for your advice. thank you,------------------------------Best Regards,Mohamed AzarudeenRocket Forum Shared Account------------------------------

Hi all, I have just joined. Our company in South Africa runs a D3/SystemBuilderSB+ asset finance application. There is shortage of programmers/developers in the country and I would like to enquire if there are perhaps any programmers or developers who could perhaps assist in supporting our application. Please respond whereafter we could perhaps communicate directly. The ideal situation is if the timeline of interested parties are as close as possible to the GMT+2 timeline. Regards, Derek Gerber ------------------------------Derek GerberMrRocket Forum Shared Account------------------------------

Hi, I am struggling to run SQL statements (UPDATE) on my universe files.  If we run the same command as a root user then the SQL command is successful. This would indicate a permissions problem. Does anyone know which files need to be given permissions to, in order to  allow SQL updates on normal Univere files ? Thanks, Greg------------------------------Greg LivingstonUniverse Practice LeadOUTsurance InsuranceCenturion GA ZA------------------------------

Hi All, Im back to MV-World after a 20-year break. Formerly i was developing an application with advanced Pick / SB+. I want to activate Database triggers on a UV Database for some UV Datafiles to get dependent tables updated. But im struggling right at the beginning. I created  the following: FILE TEST.TRIGGER FILE TYPE 18 BAISC SUBROUTINE B.TESTTRIGGER with the needed parameters. After that I try to activate the Trigger with CREATE TRIGGER TESTTRIGGER BEFORE INSERT OR UPDATE TEST.TRIGGER B.TESTTRIGGER -> I Get the message TEST.TRIGGER unexpected. I thought that I have to convert the file to SQL Table befor so i tried the following command: CONVERT.SQL TEST.TRIGGER -> I Get the Message: Can't run CONVERT.SQL: 'UV11TEST-TL\\Administrator' is not an SQL User So i logged in as Administrator User and tried: GRANT DBA TO t.ludwig or GRANT DBA TO Administrator  -> I Get the message: UniVerse/SQL: "UV11TEST-TL\\Administrator" is not an SQL user.   I think the problem is to get the f

Hi, thanks to a few AccuTerm Training YouTube videos I have started to move forward but have hit a problem I cant yet resolve. I am trying to create a screen that show customer details, basic customer info with Rep Code and name (looked up from Reps file)   that's working.   Next step - to be able to update these details, simple stuff works but I am stuck on the Rep Code.   I have created a list box which should show the Rep code but no its blank.    Then I have created a click event which populates the Rep List with code in first column and Name in second that works and allows me to select a different Rep problem is that the new Rep code is not shown, new Rep name is shown via the validate event for the Rep code I simply can not get the Rep Code to show in the box for it  I am sure that I am doing something very simple wrong but cant find it. Can anyone help please  p.s. the training videos get very near the answer but leave it as something for future development of the training app -

I have a 5 gig  file that has 7 million records. the record ids are like this : 7060834*11, 5425655*84, 1931679*19. Should this be a hashed file or a dynamic file? Is there a set of rules that should be used to help with the choice?------------------------------[Gary] [Rhodes] [Universe Developer][NPW Companies][Hialeah] [FL] [USA]------------------------------

Help,  I am in desperate need of a 9.0.0 or 9.0.2 installer for client whose system crashed.    Rocket is unable to help as this is the last version from TigerLogic and some contract BS is stopping them from having a copy on their webpage. Anyone out there with a copy, it would be most helpful. Thanks,  Steve Love Computyme PS:  Rocket won't activate  9.0.6 for the same BS reason as not having 9.0.2 -  for other users of 9.0.2 be aware of the lack of availability of this version from Rocket.------------------------------Steve LoveVPComputymeAbington PA US------------------------------

A new FAQ resource is available for AccuTerm customers that need information about the product. The FAQ contains important details about AccuTerm 8.1.1 and below. Whether you want to know how to buy, license, upgrade or many other common inquiries, the FAQ will give you a place to start. I hope you'll find this new resource useful. Please contact the Product Management team or Technical Support if you have suggestions for new entries in the FAQ. ------------------------------Hernando BordaProduct Manager, MultiValue ToolsRocket Softwarehborda@rocketsoftware.com------------------------------

Dear all,Has anyone implemented data encryption at rest using AIX Logical Volume Manager (LVM) with UniVerse?If you have done this, what issues or roadblocks did you find?Thanks,AndrewUltradata Australia Pty LtdThis message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action or place any reliance on it. If you have received this message in error please notify the sender immediately via return email. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of the company.

What IDE is everyone using for Universe DB to see the data etc... just want to see if there is anything better than dynamic connect?------------------------------Daniel ConradieRocket Forum Shared Account------------------------------