Product Forums

Hello. How can I solve the problem "Screen window type does not match picture window type"?

Hi AllI've been baffled by this, but I will regard the instance as possible serendipity!By chance (and a good measure of trust) I copied the original load of D3 of the Pick0 file into my home directory (in Linux)This Pick0 would only have 16 ports etcI then proceed to amend the number of ports to a greater number. The manual for 10.3 states to reload D3 - which I did :) I now discover that starting D3 from my home directory takes THAT entry (of Pick0) rather than the true entry in /usr/lib/pick!!!!I guess this "could be great" in a development environment when you wish to have a minimum number of pibs, but it is rather confusing when it doesn't take what you amended in as the /usr/lib/pick/pick0 entry.So, tip - launch D3 from /usr/lib/pickRocket - please be aware of this - unless otherwise.Also, can anyone give me a reason why Linux kills D3 processes? Especially when I do a backup/restore or even a re-index. Is it swap space? memory?Thanks Stefano

Blinks. Our product uses the Universe database with Pick Flavored account running on various Windows OS platforms. What, if anything, can be done to reduce the number of file  blinks that we are seeing? Three causes that we've identified so far are: Power failure, No more disk space, Anti-virus.  Are any UV versions (or Windows versions) more susceptible than others to Blinks? Thanks in advance for your inputs.------------------------------Gil SteidleDEVDDI System Incbrick NJ US------------------------------

The new WEB-BROWSER2 control works different from the old control. Before I could drag a file onto the control and I would get the MSG-WB-NAVIGATE-COMPLETE event and with that I had the filename. Is there a way this could work again or does anyone now a work around?#web-browser#extend

I downloaded and installed uniface, registered on the website, received an email containing the Entitlement ID: 20a8c1c4-****-****-*****-************, however, at the end of the installation, when I go to activate the product the message appears: "Customer IDs do not match. Please contact Uniface support." ------------------------------Renato CurveloMrRocket Forum Shared Account------------------------------

Good afternoon: I have an application in Microfocus Cobol - WPF that was working until a few hours ago. In the meantime, I've been updating some NuGet packages and, from that point on, when the application starts, it immediately gives an error that is as follows: " System.ArgumentException HResult=0x80070057 Message=An item with the same key has already been added. Source=mscorlib StackTrace: em System.ThrowHelper.ThrowArgumentException(ExceptionResource resource) em System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) em MS.Internal.Resources.ContentFileHelper.GetContentFiles(Assembly asm) em MS.Internal.Resources.ContentFileHelper.IsContentFile(String partName) em MS.Internal.AppModel.ResourceContainer.GetResourceManagerWrapper(Uri uri, String& partName, Boolean& isContentFile) em MS.Internal.AppModel\\ResourceContainer.cs:linha 138 em MS.Internal.AppModel.ResourceContainer.GetPartCore(Uri uri) em MS.Internal.AppModel\\ResourceCon

Hi all We want to know which users are locking a file. What we do now: 1- Execute LIST.READU. We can get the PID of the session that is locking the file. 2- With this PID we can execute a LISTU command or run a ps BASH command 3- Parse the output so we can pair PIDs and usernames This is quite convoluted, and, also, we have discovered that the LIST.READU output has changed in the newer Universe version (even with the INTERNAL parameter) so we have to keep check of the system version to get the PIDs. Is there a way to ask the system what are the users that are locking a file?------------------------------Héctor CortigueraQuiter Servicios Informaticos SL------------------------------

I am required to check whether Webview2 runtime is installed on the system. Is any utility available with AcuCobol 10.5.1 to check this, Or am I required to create a DLL to accomplish the task? Please advise. Thanks, Aji Cherian

Patch 10.4.02-049 Downloads Product availability Matrix (PAM)Downloads of this patch are available from the Rocket Customer Support Portal.Further explanation can be found here. New Feature(s) Uniface UX text field, number field, text area and select support a new property 'label-position' allowing you to specify if the label is positioned above, below, before or after the widget. The default is 'above'. Currencies OpenSSL upgraded from 1.1.1t to 1.1.1w Support for Microsoft SQL Server 2022 on Red Hat Linux 9 and Oracle Linux 9 (LIG) Fixes UNI-37474 Problems in production systems when the 'stmtcache:on' connector option is used for the Microsoft SQL Server or PostgreSQL database. UNI-37042 Popup Windows with relative positions may be rendered outside the screen's borders, making their content unreachable. UNI-37474  -  Problems in production systems when the 'stmtcache:on' connector option is used for the Microsoft SQL Server or PostgreSQL database.

Hi, Is it possible to run miniconda-zos-<X.Y>-<yyyy-mm-dd>.run in "silent mode" (with a responsefile or something similar)? /Njål------------------------------Njaal SlettenDNBBergen NO------------------------------

by Dongbo Zhang We recently introduced a new feature in Uniface that empowers developers with enhanced pattern matching and validation capabilities: Regex String. On top of legacy Syntax Strings, Uniface now provides you with a new option of using regular expressions to define and validate patterns within your applications. What are Regex Strings in Uniface Regex Strings are regular expressions enclosed in forward slashes (/). They provide a flexible and robust way to specify patterns for validating user input, searching and comparing strings, and performing complex text manipulations. How to Use Regex Strings in Uniface Defining Field Syntax: You can use Regex Strings to specify the expected format of data in fields for Form and DSP (Dynamic Server Page) components. For example, to enforce a Canadian postal code format (B2Y 5K2), use the Regex String /[A-Z]d[A-Z] d[A-Z]d/. Pattern Matching in ProcScript: In ProcScript, leverage the $regex function to convert a string to a Regex Strin

Putty works fine, but when trying Secure Shell with Accuterm 8 I get the following error. No supported signature scheme exists------------------------------Steve ShourdsVPPerfection Software IncNorth Palm Beach FL US------------------------------

I needed to extract just the 4-digit year from an invoice file.  I created both an "A" and "D" dictionary item using "DY4" (called ORDER.YEAR) It lists the file perfectly, but when I try to select using ORDER.YEAR it finds nothing:      ex:  SELECT BILLING WITH ORDER.YEAR EQ "2019" 0 record(s) selected to SELECT list #0. Also strange - if I add a "[" OR a "]" OR both, it works?      ex:  SELECT BILLING WITH ORDER.YEAR EQ "[2019"  or               SELECT BILLING WITH ORDER.YEAR EQ "2019]" or               SELECT BILLING WITH ORDER.YEAR EQ "[2019]" My solution was to create an I-discriptor to avoid issues in the future: 0001: I0002: OCONV(@RECORD<29>,"DY4")0003:0004: NYR0005: 4R0006: S0007: My fellow developers and I could not explain this, as it must be a flaw in the back-end. Just curious if this could be explained? Nelson ------------------------------Nelson SchrothpresidentC3CompleteShop LLCHarrison OH US------------------------------

Hi, When we use UPOPMAIL to send a mail on an Office365 account, the mail does not respect DKIM conditions : If the receiver applies DKIM condition, the mail sent by UPOPMAIL is spamed. Here is the code we use : newinstance "UPOPMAIL", hPopmail hPopmail->SetSecurity("SMTP=UStartTLSSMTPUSE=MAND", "")HPOPMAIL->SetSecurity("SMTP=UAuthLoginSMTPUSE=opt","USER=%%FROM.BIDON%%%PASSWORD=%%FROM_MDP.BIDON%%%") vSmtpServer = "smtp-mail.outlook.com+587"    hPopmail->LogonSmtp(vSmtpServer, "", "")If ($Status >= 0)    ; Specify the mail header information    hPopmail->SetFrom("%%FROM.BIDON%%%")    hPopmail->SetToList("%%TO.BIDON%%%")    hPopmail->SetSubject("Envoi depuis Uniface 10 - %%$$CODECLI")    ; Specify the message body    hPopmail->SetMessage("Ceci est un mail envoyé depuis smtp.office365.com", "")  ; plain text body    hPopmail->Send("IgnoreRcptError=True")EndIf We get a 0 $Status, the mail is correctly sent but DKIM informations are not OK. Should I send an ot

Hi  What is the next available patch update for Microfocus COBOL Server 8.0  that will update the security vulnerability of the openssl included. Current installed:cobol v8.0.0PRN=K1CRH/AAK:Ao.U4.13.04PTI=32/64 bitPTI=Micro Focus COBOL Server 8.0 - Patch Update 08PTI=Patch Update 08PTI=pkg_324515PTI=MFInstaller Scan vulnerability: Path : /opt/microfocus/VisualCOBOL/bin/openssl Reported version : 1.1.1t Fixed version : 1.1.1x Thanks,Aldous

Test

Using thin client runtime 10.51 for Linux.  If I create a WebView2 browser control in our application, then call another program which creates an activex control, I get a memory access violation.   Windows (not thin client) does not have this problem.

Hi Unifacers with U9/U10 we succesfully read and write Microsoft Excel cells using the (very old) DDE method; so basically we open a Microsoft Excel file, and while open in the background doing the following: $50 = "Excel" $51 = "c:\\temp\\filename.xls" $52 = "R1C1" perform "UDDEREQUEST" and we get succesfully in $53 the value of the cell is there a way to do the same with LibreOffice Calc instead of Microsoft Excel? I googled something and just found that I should replace my instructions like this: $50 = "soffice" $51 = "c:\\temp\\filename.xls"                 (or filename.ods) $52 = "nameofthesheet.C1" but it does not work.. anyone tryed to do something similar? or you left alone DDE and went to other methods like OLE or others? a working example would be great thank you Simone------------------------------Simone PeccheninoLabinf Sistemi Srl IT------------------------------

I have reported this to support but wondered if a) anyone else has seen this issue, and b) warn those of you that may be unaware of it. The GETLIST or GETLISTV statement in QM Basic (not to be confused with GET-LIST from TCL) uses the syntax: GETLIST "LISTNAME" TO MY.LIST SETTING CNT ELSE whatever.... The SETTING CNT is what's broken here. Rather than return the count of items in LISTNAME it returns the count of the most recent active select list you may have had - even though it's no longer active. You can test this quite simply by writing a program such as: PRINT "Listname: ":INPUT LNAMEGETLIST LNAME TO MY.LIST SETTING CNT ELSE STOPCRT "Record Count: ":CNTFOR I = 1 TO CNT   CRT MY.LIST<I>NEXT I If you compile / catalog that, then create yourself a savelist with 1 or 2 items in it then log off. Log back in you will be in a new session that has never had an active select list. Run the program, give it your listname and instead of the expected "Record Count: 2" and showing you the

As Rocket's MV evangelist, I'm starting a discussion. What are you thinking or doing with AI around your MV app?------------------------------Mike RajkowskiMultiValue Product EvangelistRocket Internal - All Brands US------------------------------

One reasonably common issue that arises, which can result in a multitude of different errors, relates to JCL comment continuations being overlooked. Take for example the following JCL that allocates ISPF panel and messages library concatenations ISPPLIB and ISPMLIB, respectively: Now look at the output created when the job is executed. First the JESJCL output file: And this in JESYSMSG: Note that: a) unlike all other datasets in the ISPPLIB and ISPMLIB concatenations, dataset CMNSUP.INTL.CMN830.PANELS is not preceded by a number in the JESJCL output. b) the JESYSMSG output file shows only one dataset being allocated and released under the ISPPLIB DD statement, unlike ISPMLIB which shows all three datasets being allocated/released. This behaviour occurs because the comment starting in column 55 of the first ISPPLIB DD statement continues into column 72, which is also non-blank. This acts as a comment continuation statement that effectively makes the following card a comment, too, reg

I was migrating to a new server running Rocky Linux 9.4 and everything is working good. D3 installed, Cups working, migrated all Linux users, etc. When using Putty SSH it all works. But when I try to connect via AccuTerm 8 Secure Shell SSH version: auto, I get: No supported signature scheme exists (SSH).  -   and when I click to view details it says. No supported SSH2 signature scheme exists. The list of supported signature schemes received from the remote host does not contain a scheme supported by the local machine. SSH_ERROR_UNSUPPORTED_SIGN). Note: Accuterm's SSH2 implementation supports "ssh-dss'" and "ssh-rsa" signature schemes. ------------------------------Steve ShourdsVPPerfection Software IncNorth Palm Beach FL US------------------------------

Hello, I used the "open" and "close" instruction to connect on differents databases, changing the PathName of the connector $MQL. However, I want to verify if the connection is done on the correct database after open a new one, even if the $Status = 0. (I have cases where I put something wrong in the pathname, and $Status=0 however) Is there a Uniface instruction which can give me the pathname actually used? Thanks------------------------------Jérémie CEDOLINProges PlusWillems FR------------------------------

Created On:  01 June 2010 Problem: How do I avoid failure of installation of NetExpress 5.1 under 64-bit Windows 7? Resolution: The NetExpress 5.1 installation CD does not support Windows 7 in64bit mode. To successfully install NetExpress 5.1:Logon to the Supportline website, navigate to Product Updates -> Net Express 5.1 http://supportline.microfocus.com/websync/netx51.aspDownload and install Net Express 5.1 WrapPack 1 NXP3251010074.exeThis is a complete install of Net Express. Once this installation is complete, download and install WrapPack 04 NXP3251040083.mspThis will produce a Net Express 5.1 installation with the latest maintenance, which will run under 64bit windows 7. Incident #2456431 Old KB# 31136

Hi Unifacers, we can't figure why in SOME installation we have hundreds and hundreds of userver.log files in customer servers, created every day already tryed to add or remove putmesslogfile, add or remove ioprint, add ioprint=0.. if we specify a different putmesslogfile name in ASN we can see them correctly renamed but thet're still there.. if we don't specify a filename then we get those hundreds of userver (+ PID) .log anyone else/idea? thank you Simone------------------------------Simone PeccheninoLabinf Sistemi Srl IT------------------------------