Product Forums

I've been trying to create an updated Universe box using Rocky Linux. When I tried to connect with AccuTerm 7.3 it tells me there's no supported key exchange scheme. I'm not sure but I think it's because Rocky Linux removed the two ciphers that this version of AccuTerm supports, triple DES and blowfish. I found a post where Pete mentioned that there was an update to 7.4 that had support for newer encryption standards. I was wondering if that's available anywhere?

I am getting an error that is confusing me. Searching the forum, I see that  not having the EXT ATTR = EXT is the most common reason for the CMS2361 error.    Is there a second most-common reason that I might be missing?   It has been a while since I've created one of these; it's possible I've forgotten a step.  Thank you so much for your time and help. Melissa

Hi Freaks My challenge:In a non modal world I have to check on FormLoseFocus some conditions and  ask the user how to proceed.I.e stay in the instance or leave it to the clicked one. Under certain circumstances, data is also storedAs mentioned in the documentation, in a FRLF trigger the allowed statments  are limited, especialy a ask-message should not be presented to the userSo my idea is to send a message to the current(old) instance (and return with -1) which calls the ASYNC-trigger. In this I can call check routines and ask the user,But now I run into a problem:If the user say leave the current instance and go to the clicked (new) instance, which instance is this?Question:Is there any way to get (in FRLF) the instance,  which should get the focus next? BTW: For the good old version 9.7  I did a comlpex ping-pong coding to get such information and handle checks and stores on FRLFBut with 10,4 the sequnce was changed and I did not find a way to implement our needs ... Ingo-----------

Hi,isn't there a "Deployment Archive" anymore in Uniface10?Regards RogerW

Looking for U2 BASIC coding example for PCL 6 interface.  Thanks Lou  ------------------------------lou turSenior Sales EngineerRocket Internal - All BrandsSt Petersburg FL US------------------------------

Hi all. From dowload page: D3 Windows 10.4.0 is certified on Windows 10 and 11, Windows Server 2016, 2019, and 2022  From D3 Windows Installation Guide pdf, page 9:  D3 Windows 10.4 is certified for use in these environments▪ As a server over Windows 10 Pro and 11 Pro, 2012 R2, 2016, 2019 and 2022.▪ As a client over Windows 10 Pro and 11 Pro, 2012 R2, 2016, 2019 and 2022. Is D3 10.4 certified on Windows Server 2012 R2? Thank You very much. Stefano------------------------------Stefano MaranSenior programmerGTN SpATavagnacco IT------------------------------

A new hotfix build of ChangeMan ZMF for Eclipse (ZMF4ECL) 8.3, ZMF4ECL 8.3.0 Hotfix 007 (build 691), is now available for customer use. This build resolves the following issues: OCTCR46A386001 - Unable to revert ZMF package in 'FRZ' status using ZMF4ECLOCTCR46A361002 - ‘SER0524E Requested File ENQ not available’ creating new zFS/HFS component This latest hotfix build is cumulative with earlier hotfix builds and therefore includes the fixes included in all of these, too. As per usual, we recommend customers either running or upgrading to ZMF4ECL 8.3 open a case with the Support team requesting a copy of the latest ZMF4ECL hotfix build.#SupportTips/KnowledgeDocs#ChangeManZMF#Announcement

I am trying ti import my mainframe data conversion macros using the program CASCNVIM but it doesn't recognize CLINTCP=819 MNOTE ***  8,Error , code page 819 not recognized I try with CLINTCP=8859-1 CLINTCP=IBM819 CLINTCP=CP819 CLINTCP=IS0-8859-1 with the same results Where can I get the recognized codepages? Best regards and thanks in advance Horacio Merovich #EnterpriseServer

Suppose you have a file like TEMP that has NAME, ADDRESS, and PHONE where NAME and ADDRESS are both single values but PHONE is multi value. Like so: TEMP..................... NAME...... ADDRESS... PHONE..... 1                         NAME1      ADDRESS1   PHONE12                         NAME2      ADDRESS2   PHONE2-1                                                PHONE2-2                                                PHONE2-3 If you SELECT TEMP NAME ADDRESS then you will get a list where each record supplies two items to the list, namely the NAME as one item and ADDRESS as another item: 001 NAME1002 ADDRESS1003 NAME2004 ADDRESS2 However, if you SELECT TEMP NAME ADDRESS PHONE then you get at minimum 3 elements per item, but if PHONE happens to have mulitple values, no NAME or ADDRESS is supplied to go with each value. 001 NAME1002 ADDRESS1003 PHONE1004 NAME2005 ADDRESS2006 PHONE2-1007 PHONE2-2008 PHONE2-3 How can I get blanks inserted for NAME and ADDRESS when PHONE has multiple

This may well be covered somewhere. I tried searching, but my impression was that the search results were for ANY forum rather than this particular one, so I kinda drowned in all the results. Assume I have the option/ability to create a copy/paste list of files I want to transfer from the mainframe to the PC. For example 'myuser.a.b(member1)' 'myuser.a.b(member8)' 'myuser.a.b(member25)' Is there a way I can put this into some sort of Notepad script (obviously (?) with commands surrounding the filenames) such that I can then run the script within Secure FTP transfer (or outside) so that (in this example) these 3 files are transferred to the PC (I realize that I would obviously want/have to specify the receiving PC directory where these files end up). In this example, there are only 3 files, in reality, it might be anywhere between 30-50, so being able to create/edit a script list for the transfer would simplify things enormously.  Thank you.------------------------------Michael Simpso

I search a way to define in a excel-cell a formel and had problem to do this or to recognize this field/cell as formel Send data, text, date, values is not a problem. The given example "excel.cbl" is not very exhaustive, in msexcel.cpy are many information, but i don't have found the correct solution. Who is interessed to exchange information on the excel/office integration? who can help me for formel? (not managed cobol)

by Etienne Thijsse Assignment files are how you configure your Uniface applications. However, currently assignment files are not very flexible. Often you need several assignment files that are almost identical, except for one or two settings. For example, two users on the same system that use the same application each need their own assignment file, if in the [files] section, the user’s home directory needs to be set. Or, if there are multiple versions of the application and the version number is part of the path to the Uniface archive files (.uar), then you also need a separate assignment file for each of these versions, even if this is the only difference.  Dynamic Assignment Files  To solve this profusion of almost identical assignment files, we have introduced the ability to use environment variables in the files, enabling assignment files to be more dynamic. The actual values of some of the settings are not hardcoded anymore but are derived from environment variabl

Hello all,         I use ODBC from rocket to open tables universe into excel.   It work pretty well for field with Single Value  (S) but not at all for field with Multivalue (M)   Is it the normal behaviour ? I precise I can read the Multivalue (M) data into the universe shell.          Thank you for your help.------------------------------deleuze jeanRocket Forum Shared Account------------------------------

Status: Waiting for VotesThe default 35 character description is plenty in most cases. Some users have requested an option to create a longer description for certain changes.#ZMF

Status: Waiting for VotesWe run housekeeping every night, so that only the latest 10 staging versions are kept for each package. There is no way of maintaining this by application. Ideally we would like to keep the latest 20 staging versions for some applications.#ZMF

Hi, I wanted to check it's okay to have Net Express 5.1 and Visual COBOL 9.0 installed on the same laptop? Will initially be using VC native code and still supporting out Net Express application so I wasn't sure there will not be an issue with the rts. Thanks

Hello all,  I made a python script to read multivalue data in universe account and write in a file as CSV for example.  So, for decoding I use cp850.  Until that everithing working. When it's time to write I receive this error: error cp1252: UnicodeEncodeError: 'charmap' codec can't encode character '\\u2591' in position 88: character maps to «undefined» So decode is good with cp850, ok with that ?  Problem is encoding ?  Maybe I can force encoding in utf-8 but I don't know how to do that ? Do you have an universe idea ? :-)  Thank you !  Jean------------------------------deleuze jeanRocket Forum Shared Account------------------------------

Hello. I receive the message "Panel XML" model version outdated, new version: 1.1 How can I update the Panel XML Files? THX Dominik

Hello. I have completely re-imported the album from our IBM I (AS400) and am getting various error messages (number 21592 and 1368 warnings). Eg:- Menu Id reference "OPTIONS" not found - Referenced panel 'MENUS' does not exist One assumption is that these "OPTIONS" come from the templates. How do I get rid of these errors?

I originally created this post a while ago : How to set Paper Size being passed from Printer Selection , and I never got it to work. Here is my code: PREPARE-PRINTER-WITH-STANDARD-PRINTER-DIALOG. CALL "P$SETDIALOG" USING PrintDialog. CALL "P$DisplayDialog". IF DIALOG-RETURN = 0    move SET-DEFAULT-PRINTER to default-option    move dpb-len of MyDefaultPrinterBrowser to dp-len    move dpb-body of MyDefaultPrinterBrowser(1:dp-len) o dp-body    call "PC_PRINTER_SET_DEFAULT" using by value default-option                                                                 by reference MyDefaultPrinter     PERFORM OPEN-PRINTER-PARA END-IF. What I would like to do is grab what was changed in the Windows Printer selection box, and have it prin

Hello,  The Copybooks and Includes are downloaded but not displayed as available. Is there a setting in IBM Z Open Editor to be made, to be able to open the copybook? ZMF has the Option to download the Copybooks, and I get the message that they were being downloaded: But I still get the error message: what could I do to fix the issue?#ChangeManZMF#Copybookresolvement#VSCode#include#ZMFExplorer#COPYBOOKS#ZMF#VSCode

Hi Everyone, We can work with EDI at the active\\passive cluster platform, but the activation process was done manually. It means the user should turn off one machine and turn on another.Does anyone know if this scenario has changed? The last installation I performed was in May 2020.------------------------------Marco FerrazCSP - CONSULTORIA & SISTEMAS LTDARio De Janeiro BR------------------------------

As part of our slow migration from CS to DSP, I have a form with an HTML widget, (the only field painted).  On the loaded DSP I have an attributes only field (button) with a call to unifaceTriggers in the onClick. This is supposed to call another instance which runs crystal reports and produces a print. The first click on this field performs the actions as appropriate. After which, none of the fields in the DSP are responsive. I can't type in text areas, I can (apparently) click one radio group, but the onChange is not fired, clicking the 'button' which just worked does nothing.  To try and find the issue, the uniface trigger in the form is now  askmess "Printing" return 0 But the issue persists.  The onclick trigger I am clicking is  webtrigger onClick javascript p=this.getParent(); f=p.getField("PPV_PREP_ID"); id=f.getValue(); rpt=p.getInstance().getEntity("FILTERS.NOMODEL").getOccurrence(0).getField("D_REPORT_FILE").getValue() if (typeof window.unifaceTriggers === "function") {

Hi allHas anyone else noticed that you need an extra CR when you issue the shutdown (y command in D3 - AFTER it has started the shutdown process?It gets "stuck" (bad word) at a point and unless you hit a CR only then does it do the remainder - shut down the printers and ends the shutdown process to return to Linux. OR should we rather be using the systemctl stop D3svc ?Regards Stefano

Hey all,  Anyone for a simple way to convert $datim value to UTC directly in uf? $datim --> "2024-01-12T15:36:15.000Z" Regards, Knut------------------------------Knut Dybendahl------------------------------