Product Forums

hello, I want to raise errors in my py scripts then these error catch by into @PYEXCEPTIONTYPE , @PYEXCEPTIONMSG, @PYEXCEPTIONTRACEBACK  What can be the best method ?  a/ to re-raise a error from a try sequence : these sample can catch 3 types of error : path not found, json not correct, mykey not found ...  def myfunc(path): result = '' try: f_path = open(path) config = json.load(f_path) a = config["mykey"] except: raise how can I have it at BASIC level into @PYEXCEPTIONTYPE , @PYEXCEPTIONMSG, @PYEXCEPTIONTRACEBACK   in this case, @PYEXCEPTIONTYPE , @PYEXCEPTIONMSG, @PYEXCEPTIONTRACEBACK are null. b/ to raise a error from script : def myfnc(a) if a < 2: raise ValueError(f"integer above 1 expected, got {a}") in this case, @PYEXCEPTIONTYPE , @PYEXCEPTIONMSG, @PYEXCEPTIONTRACEBACK are null. Thanks manu

I'm a little confused as to how D3 10.4 requires the .ini entry to be configured for disk and memory allocation.Is the disk in MB or frames ( / 4096) or GB? Say I required an 80GB disk - what would I need to have as the disk size parameter in the .ini entry?Also the total memory - again is it in MB / GB?Say I wished a total of 6GB of main memory - what would the entry be on the .ini.The install manual is a bit confusing and not that clear (IMO).ThanksStefano

Patch 10.4.02-045 Downloads Product availability Matrix (PAM)Downloads of this patch are available from the Rocket Customer Support Portal.Further explanation can be found here. New Feature(s) You can now configure the ProcScript code formatting tool with block indentation and alignment rules in a new ASN file section [formatting]. For available formatting rules and usage, please refer to the documentation. UX widgets have been enhanced with the capability to filter function call tracing based on the widget class name. This enhancement enables Uniface UX developers to avoid distractions from unrelated tracing messages. Uniface ProcScript Editors have been enhanced with Format Document: the code of the complete document will be indented allowing better readability and standardization. Format Document can be chosen from the code editor's popup menu or activated with a shortcut key.Note:If you are not using the edist to install this patch, add the following line to the [us

Hello team,I am in a process to migrate Extra! code to Reflection.In Extra I am using the following function to pass Enter to the mainframe screenSendKeys("<ENTER>")I can;t find how can I replace it with SendControlKey SendControlKey ("<Enter>") - fails in the code SendControlKey (13) - fails on the screenCan you help me how to use it in Lotus Script please ?Thanks, Alon#Script#Reflection

For jBASE users > 5.7, here's a sample class that can get additional information on a port (e.g. the port number and program that is locking another port).Usage:analyze = new object('$analyze')details = analyze->fetch(port_nbr) ;! you can also do analyze->fetch(pid, @true)if details->$hasproperty('blocking') then    crt port_nbr:\\ is blocked by port \\:details->blocking->port:\\ at \\:details->blocking->locationendanalyze.jabba ! $analyze class method $analyze::$analyze() ! ! $system is used to get stats on the port ! this->o.sys = new object('$system') ! ! Get the lock details for the port ! this->o.lock = new object('$lock') ! ! Open the proc dir needed for "call_stack" ! proc_dir = system(1027) open proc_dir to proc then this->proc = proc end else throw \\Cannot open \\:proc_dir end end method method $analyze::fetch() arg = new objec

I tried using your TestExcel program to read a cell. I set the file name with            move spaces to ExcelFileName           string 'z"C:\\Users\\alan\\Documents\\Micro Focus\\'             'Net Express 5.1\\WORKAREA\\SMNG\\emailsmar25.xlsx"'             delimited by size into ExcelFileNameThis is in the NE5.1 IDE with Wrappack 18 on Windows 10.  Error: Open methods of Workbooks class failed on "Open" The path C:\\Users\\alan\\Documents\\Micro Focus\\Net Express 5.1\\WORKAREA\\SMNG is correct. The file name is emailsmar25.xlxs I do not understand what is wrong.  I examined the ExcelFileName while animating and it is correct. Thank you, Alan Beecher

It seems, if a secondary form has a large enough width if gets attached to the main form (meaning it does not float anymore).  It can be dragged and becomes a floating form... but this is an additional action. What is wanted is that a secondary form is initialised as floating no matter what its width. Is this a bug? v10.4.01 ------------------------------Osman Shariff------------------------------

Hi, As mentioned in previous thread, we're playing with 10.4 on Linux, and I'm new to the VME/FSI world! Is it possible to increase the size of the VME without a re-install? In the D3Vme.ini file there are these statements: <pre>[d3vme.disks.0]name                           = Disk0.d3size                           = 1024000offset                         = 0</pre> I tried adding a [d3vme.disks.1] to mimic the adding a disk to the old pick0 file, but the system wasn't fooled! Any ideas? Thanks Tom------------------------------Tom PowerOwnerPower Business SystemsBenoni ZA------------------------------

We have forms with non fixed fields... The fields can be hidden, and the width of them can be changed. What is needed is the form scrollbar to be applied if needed dynamically.   The form in question is defined as secondary in the IDE (as it acts as a sort of popup) The obvious place would be (newinstance) where we define the width of the form to be activated. However, it seems the decision to display the scroll bar or not is determined by the width defined in the frm in DICT via the IDE (and NOT the newinstance width) Have I missed something or can this be resolved? V10.04.01 ---- Edit: The instance width is the width to display the window of the frm which  is defined in the code The frm width is defined in the frm and can not be changed in code. The ideal is if the frm width was also part of the instance properties....   --- ------------------------------Osman Shariff------------------------------

Hi all, We are receiving data in json structures. For some characters we receive escaped codes such as \\uxxxx Example : \\u00E9 for an 'é', \\u0027 for an apostrophe, etc Is there a Uniface function to convert them ? Thanks for your help Nicolas ------------------------------Nicolas ColmartSelf RegisteredNice FR------------------------------

Both items are strings. They're not equal. It seems Universe is doing some kind of conversion on them that makes them equal. If I convert the strings to integers it knows they're not equal. If I concatenate a letter on to either string it knows they're not equal.  My client was using smaller numbers in a field but a new specification requires and 18 digit number. They don't want to to through all there programs that compare these numbers and modify them with a alpha character or int conversion. Does anyone know what's going on and how to best fix it?

I posted this question on another place - and Chris Glaser gave me some help Tutorial or example for calling a URL and processing the response - Micro Focus™︎ Visual COBOL User Discussions - OpenText Micro Focus Visual COBOL - but suggested I re-post here.  I need to call an API from the ESODBCXA module.  Both the calling and called programs have been developed - and the API is written in C# and is deployed. this might work - but it does a GET and I need to pump in a BODY in JSON Tutorial or example for calling a URL and processing the response - Micro Focus™︎ Visual COBOL User Discussions - OpenText Micro Focus Visual COBOL#EnterpriseDeveloper#EnterpriseServer#EnterpriseSuite

I think I am missing something basic with the spooler.  For a long time our company was using D3 and the way our software was setup, whenever something was to be printed, it would first generate a hold file and then the user could send the hold file to the printer at their leisure. When we switched to QM I just had things go immediately to the printer because for the life of me I couldn't figure out how to send a hold file to the printer after the fact.  I know this is something very basic but I just don't see it.  The solution must be in some mental blind spot of mine. Can someone help me with this?------------------------------Steve HenkelCIORocket Forum Shared Account------------------------------

Trying to `git clone` from a repository on another z/OS system I get$git clone -v demnt15@stutvs2a:/u/demnt15/tmp/mytestCloning into 'mytest'...fatal: protocol error: bad line length character: ����fatal: the remote end hung up unexpectedlywhere the characters are <<^ 88D0CCD6I have no idea why this happens. Any advice would be appreciated. If I try to clone from WSL in Windows I get the same error.------------------------------Manfred LotzKyndryl Deutschland GmbHKelsterbach DE------------------------------

Hi,  I have curl 8.4.0 with z/OS 2.4 and I am getting these errors: OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to xxx.xxx.xxx.xxx:443 On the first request if failed with insufficient randomness, which points to /dev/random and /dev/random not working correctly, which led me to find out CSF was not started and the SAF resources was not defined. We got past that, the User ID using Curl has READ access to the following CSFSERV profiles : CSNBRNG - Random Number Generate CSFNRNGL - Random Number Generate Long Now, is there any other profile that needs to be authorized for SSL to work ? I did peek the documentation and I could not find any references. curl -V curl 8.4.0 (i370-ibm-openedition) libcurl/8.4.0 OpenSSL/3.1.4Release-Date: 2023-10-11Protocols: dict file ftp ftps gopher gophers http https imap imaps mqtt pop3 pop3s rtsp smb smbs smtp smtps telnet tftpFeatures: alt-svc AsynchDNS HSTS HTTPS-proxy Largefile NTLM SSL TLS-SRP UnixSockets

I have RHEL 8.8. It has OpenSSL 1.1.1k. My UniVerse version is 11.3.4. It is OpenSSL 1.1.1b. What is the correct procedure to upgrade UniVerse's OpenSSL to 1.1.1k.  I'm trying to install a Python Module and it throws an error trying to download a new version of OpenSSL. Jon

Hi -  I have a ISAM file.. File is in Recovery Status .. causing 9802 in program opening this file... I cannot recover the file using recover1 since file is used in real time system..  Is there any other method to recover this file or skip the bad record ? #RM/COBOL#ISAM

I need to call an API written in C# in out Micro Focus COBOL application.  I found this post very helpful  RE: Tutorial or example for calling a URL and processing the response  one thing though the call needs to ba a POST with input in JSON I can string together the body - but what is the syntax to attach it to the request?

Hi all, Apologies if I'm in completely the wrong place! We have an appplication running on D3 and have a linked sever in MSSQL using the ODBC connection. When retrieving a date column I am getting error : Error converting data type DBTYPE_DBDATE to date. select * from openquery (LINKEDSERVERNAME, 'SELECT DATE_COMPL FROM SOH SOH WHERE (SOH.DATE_COMPL={d ''2024-03-01''})') From Googling it seems I need to convert it to a string, but I am unsure of the conversion functions in D3. Any assistance would be much appreciated! Many thanks,Michael

Has anyone added support for python in ChangeMan ZMF?#ChangeManZMF

I'm embarrassed to even ask this. I've seen the answer a couple of times in the documentation but can't ever seem to find it if I'm looking for it. How do you disable the automatic paging where the program prompts the user to hit the return key to continue. I know I can use the NO.PAGE option when running the program but I want to disable it in the program itself. Most of these programs were written for native Pick and were never designed to handing automatic paging. That's why I want to disable it in the program and not in the menu that run's the program.

The ALFFLTR member delivered in the distributed ZMF SAMPLES library lists all default log events that will be delivered to the NTFYURL address for processing. As explained in this member itself, all of the listed events are delivered commented in this member which results in all of them being emitted to the NTFYURL software (e.g. tomcat, SBM, etc.). Care needs to be taken when changing or uncommenting any single event in, or adding an additional, non-default event to, the ALFFLTR dataset/member. This will result in ONLY the uncommented events being sent. All other events that were formerly sent by default will automatically be disabled in this situation.#ALFFLTR#ChangeManZMF#SupportTips/KnowledgeDocs#NTFYURL#ZMFRESTAPI

I have a program that runs from the command prompt from my program.  This is the command:  cmd.exe /C cscript //nologo D:\\NEW_MSI\\MSI_DATA\\MakeGuid.vbs > D:\\NEW_MSI\\MSI_DATA\\myguid.txt I am using CALL "SYSTEM" USING WS-CMD-LINE to run the command. (the command above is placed in WS-CMD-LINE before the call to "SYSTEM". The command works great from a dos prompt, but when I use it in my program - it does not work at all. The myguid.txt file is never generated.  Does anybody have any suggestions on how I can get this to work? 

Hi, I would like to know whether is it possible to add new source/object library into an existing release? Sample as below. Need to add additional library i.e. 10. BCACUZSRC

Can customized Qooxdoo widgets be used in MX Web? What configuration changes would we need to make to enable the use of such a widget? We don't have such a widget at this point but am being asked to explore this possibility. I haven't been able to find any Rocket documentation on the topic.------------------------------Mike WarrenSoftware Development Manager, GOLD Team LeaderCU*AnswersGrand Rapids MI US------------------------------