Rocket MultiValue

Hi folks, I'm new to Windows servers have mostly used AIX, HP-UX, and Linux.  The server to which I'm trying to connect is controlled by the IT department of Nashville Metropolitan Government.  I have gotten into server management and can see that the SSH server is runnung but when I try to make the connection with AccuTerm, I get an AccuTerm error that "No supported SSH2 signature scheme exists".  When I click on the details it tells me that AccuTerm supports ssh-dss and ssh-rsa.  I know lots of you are using AccuTerm on Windows servers, can anybody suggest what I am lacking.  I suspect there is something on the server that I need to enable or set up.  As I said, I have limited knowledge on Windows servers; or is there something I need to enable on the AccuTerm? Dale------------------------------Dale KelleyI'm it!Dale W Kelley IncHohenwald TN US------------------------------

The Chicago Distribution Center (owned by the Univ of Chicago) is looking for a Senior level U2/UniVerse programmer in the Chicago Area.  This is a hybrid position and most of the time you can work from home but it will require some time in the office which is located near 111th and I-94 (Pullman area).   The link shows certifications but they are not required.  If you're interested, you can apply using the link below. Senior Software Development Engineer Myworkdayjobs remove preview Senior Software Development Engineer Department Press Information Technology About the Department Since its origins in 1890 as one of the three main divisions of the University of Chicago, the University of Chicago Press has embraced as its mission the obligation to disseminate scholarship of the highest standard and to publish serious works that promote education, foster public understanding, and enrich cultural life. View this on Myworkdayjobs > -------------------------

When I run HASH.HELP.DETAIL APPOINTMENTS I get the following summary ---- >HASH.HELP.DETAIL APPOINTMENTS File APPOINTMENTS  Type= 5  Modulo= 149  Sep= 8      14:58:16  15-07-25  PAGE 1      138  total keys in file     578  total bytes in all keys       3  smallest key      10  largest key    4.19  average bytes per key      138  total records in file  696388  total bytes in all records    2492  smallest record    6964  largest record 5046.29  average bytes per record        0  average records per group  (optimized)    5009  average bytes per group  (optimized) Press any key to continue... ---- When I run FILE.STAT APPOINTMENTS I get the following results: ---- >FILE.STAT APPOINTMENTSFile name                               = APPOINTMENTSFile type                               = 5File style and revision                 = 64BIT Revision 12NLS Character Set Mapping               = NONENumber of groups in file (modulo)       = 149Separation                              = 8Number of r

Hi I would like to enquire when rocket would release the next version of wIntegrate, the current version is 6.4.4 is there a later version------------------------------Jorge CatalinoOwnerTecfinity CCZA------------------------------

As a valued Rocket MultiValue customer, your success is at the core of all we do. With technology evolving at a rapid pace—and security, reliability, and feature demands increasing—it’s more important than ever to keep your MultiValue Application Platform current. Upgrading is not just about getting new features; it’s an investment in your application’s future and your organization’s peace of mind.  Here are the top 10 reasons to upgrade your MultiValue Application Platform annually:  10. Reduce Third-Party Compatibility Surprises: Staying current minimizes the risk of unexpected issues as third-party vendors update their software. Rocket puts every major update through rigorous compatibility testing, ensuring support for contemporary platforms and documenting all changes.  9. Upgrade with Confidence in the Future: Incremental upgrades are simpler and less disruptive than major, infrequent leaps. By upgrading regularly, you minimize the gap between versions, allowing easier test

Hi everyone, I'm very new to Host Access and D3. We're currently working in a D3 Pick environment using the TCL (Terminal Command Language) prompt, and I need to learn everything from scratch. I do have access to Rocket Software's D3 reference manuals, but they're quite large and a bit overwhelming to read cover to cover. Could anyone please suggest the best places to find learning materials - especially video tutorials that cover basic concepts, TCL commands, creating simple programs, and understanding how everything works with real examples? I really prefer videos or more practical, hands-on resources rather than just manuals. Thanks so much in advance for your help!------------------------------Rima PrajapatiSenior IT SupportRocket Software Forum Member------------------------------

MVIS 1.3 supports oAuth, allowing developers to easily integrate their created APIs with third-party authentication providers such as Auth0 and Okta and provide token-based authorization, ensuring seamless integration with enterprise application security configurations. This first video provides a detailed overview of the capability and how to use it. This video is a demo of the application. I'm happy to answer any questions you have below!------------------------------Amey RokdeSenior Software EngineerRocket Software------------------------------

Hi All,Query regarding replication:We are aware there is an EXCLUDE_FILE config in repconfig which can be used to exclude a file but we are not looking to exclude all the records of that file instead just a single record of that file which is created every morning.Kindly suggest if there is any way to do so.------------------------------Shubham NigamRocket Forum Shared Account------------------------------

Christian, Apparently, the extension in Stack Overflow is no longer available.But thanks for the information so I can stop spinning my wheels! Dan------------------------------dan brombergRocket Forum Shared Account------------------------------

Since the update to MVBasic  2.7.1 when using the online edit mode whenever I go to open a program, I get the following error message:asjava.uniobjects.UniSubroutineException: The RPC failedI can navigate around the server and look at the files and switch accounts with no issue. The moment I go to open a program it seems to disconnect me.I attached the log for extra information.As a work around I reverted back to 2.7.0 and everything works as intended.------------------------------Jeremy BartonRocket Forum Shared Account------------------------------

Hi everyone, I'm very new to Host Access and D3. We're currently working in a D3 Pick environment using the TCL (Terminal Command Language) prompt, and I need to learn everything from scratch. I do have access to Rocket Software's D3 reference manuals, but they're quite large and a bit overwhelming to read cover to cover. Could anyone please suggest the best places to find learning materials - especially video tutorials that cover basic concepts, TCL commands, creating simple programs, and understanding how everything works with real examples? I really prefer videos or more practical, hands-on resources rather than just manuals. Thanks so much in advance for your help!------------------------------Rima PrajapatiSenior IT SupportRocket Software Forum Member------------------------------

Greeting folks! Are any of y'all of anyway to include Excel formatting characters in a CSV file? THX in advance for your helpful replies! ~Doc ------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

Is it possible to call a web page / open a new browser window when running AccutermIO?  If so, is there documentation available?------------------------------David KylesDirector of ITMDC Interior SolutionsGlendale Heights IL US------------------------------

Hi, I've been trying for a few weeks to get MVVS to work with Online Editing. I'm able to log on to my server and see all the different accounts and their files; however, when I try to open up a program, I get an error message saying the file could not be found. Further inspection into the logs revealed that there is an error with XToolSub. The error is U2 XToolSub logon account exception, {oldAccount: TESTACCOUNT, newAccount: XDEMO com.rs.mv.mvvs.common.exception.MvVsException: failed to logto account Is there something that UV admin has to do to allow for the logto to succeed? Any help would be appreciated. 

Big news for SB/XA, SBClient and SB+ customers! The latest release, 6.6.3 of System Builder Extensible Architecture (SB/XA), System Builder Client (SBC), and System Builder Plus (SB+) has been released. For SB/XA Customers: Suppress NO DETAIL LINES CREATED Message: When Report Writer output is set to DIF format and no records are selected, the error message "NO DETAIL LINES CREATED" can now be suppressed. Simply set /SB.PARMS > Reports > Suppress NO DETAIL LINES CREATED Message For DIF Output to Yes. This enhancement eliminates the need for user input, ensuring smooth batch processing. Rocket MX Workbench Compatibility: SB/XA can now run in the Rocket MX Workbench with the new VT220MX terminal type. This terminal type can identify SB application screens and displays a unique screen identifier on the 25th line for Dialogs, Menus, Input/Output Screens, Reports, and Selection Screens. For SBClient Customers: Optimized SFTP File Transfer: SFTP file transfer has been optimized for

I updated my ssl certificate on my target server.  It has been working great.  I am using this chunk of code to call it:    st2 = createSecurityContext(ctx2, "TLSv1.2")   st2 = createSecureRequest(purl, pmethod, pobjRequest, ctx2)   st2 = setRequestHeader(pobjRequest, "OPPSAUTH",AUTH)   st2 = setRequestHeader(pobjRequest, "OPPSSERVER",SERVER)   st2 = setRequestHeader(pobjRequest, "Content-Type","application/json")   st2 = submitRequest(pobjRequest, 5000, POST.DATA, pheaders, pdata, httpstatus)I reissued my cert and updated it and now when I try to call the server, I am getting:  1896:error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed:.\\ssl\\s3_clnt.c:1258:I tried to do some testing by copying the program and simplifying it and when I compile, it give the same error the first time I compile it, but then it will compile, but still does not work.If I put the old cert back, it works fine again.  I also tried calling a different server and that works fine as

Are there any plans to add JIT privileged access management to Accuterm for Linux in the future?

A Collaborative Hub for Modernization and Big Ideas We're excited to launch the Rocket MultiValue Innovation Library - a dynamic, shared forum where MV developers, architects, and innovators can showcase and exchange forward-thinking ideas, prototypes, use cases, tools, and more. This is your space to Share groundbreaking concepts Contribute working demos or prototypes Explore real-world use cases Collaborate with the broader MV community Whether you're looking to modernize legacy applications, experiment with new integrations, or simply spark inspiration, the Innovation Library is designed to accelerate innovation across the MV ecosystem. Join us in building the future of MultiValue — one idea at a time. Start exploring the Rocket MultiValue Innovation Library today — and be part of shaping the future of MV development. ------------------------------Christine RizzaManager, MV Product ManagementRocket Softwarecrizza@rocketsoftware.com------------------------------

A Collaborative Hub for Modernization and Big Ideas We're excited to launch the Rocket MultiValue Innovation Library - a dynamic, shared forum where MV developers, architects, and innovators can showcase and exchange forward-thinking ideas, prototypes, use cases, tools, and more. This is your space to Share groundbreaking concepts Contribute working demos or prototypes Explore real-world use cases Collaborate with the broader MV community Whether you're looking to modernize legacy applications, experiment with new integrations, or simply spark inspiration, the Innovation Library is designed to accelerate innovation across the MV ecosystem. Join us in building the future of MultiValue — one idea at a time. Start exploring the Rocket MultiValue Innovation Library today — and be part of shaping the future of MV development. ------------------------------Christine RizzaManager, MV Product ManagementRocket Softwarecrizza@rocketsoftware.com------------------------------

A Collaborative Hub for Modernization and Big Ideas We're excited to launch the Rocket MultiValue Innovation Library - a dynamic, shared forum where MV developers, architects, and innovators can showcase and exchange forward-thinking ideas, prototypes, use cases, tools, and more. This is your space to Share groundbreaking concepts Contribute working demos or prototypes Explore real-world use cases Collaborate with the broader MV community Whether you're looking to modernize legacy applications, experiment with new integrations, or simply spark inspiration, the Innovation Library is designed to accelerate innovation across the MV ecosystem. Join us in building the future of MultiValue — one idea at a time. Start exploring the Rocket MultiValue Innovation Library today — and be part of shaping the future of MV development. ------------------------------Christine RizzaManager, MV Product ManagementRocket Softwarecrizza@rocketsoftware.com------------------------------

A Collaborative Hub for Modernization and Big Ideas We're excited to launch the Rocket MultiValue Innovation Library - a dynamic, shared forum where MV developers, architects, and innovators can showcase and exchange forward-thinking ideas, prototypes, use cases, tools, and more. This is your space to Share groundbreaking concepts Contribute working demos or prototypes Explore real-world use cases Collaborate with the broader MV community Whether you're looking to modernize legacy applications, experiment with new integrations, or simply spark inspiration, the Innovation Library is designed to accelerate innovation across the MV ecosystem. Join us in building the future of MultiValue — one idea at a time. Start exploring the Rocket MultiValue Innovation Library today — and be part of shaping the future of MV development. ------------------------------Christine RizzaManager, MV Product ManagementRocket Softwarecrizza@rocketsoftware.com------------------------------

A Collaborative Hub for Modernization and Big Ideas We're excited to launch the Rocket MultiValue Innovation Library - a dynamic, shared forum where MV developers, architects, and innovators can showcase and exchange forward-thinking ideas, prototypes, use cases, tools, and more. This is your space to Share groundbreaking concepts Contribute working demos or prototypes Explore real-world use cases Collaborate with the broader MV community Whether you're looking to modernize legacy applications, experiment with new integrations, or simply spark inspiration, the Innovation Library is designed to accelerate innovation across the MV ecosystem. Join us in building the future of MultiValue — one idea at a time. Start exploring the Rocket MultiValue Innovation Library today — and be part of shaping the future of MV development. ------------------------------Christine RizzaManager, MV Product ManagementRocket Softwarecrizza@rocketsoftware.com------------------------------

Can I call a proc from a paragraph? ie,  I want to replace the logon proc PQ [MVSP.PROCS MVSP.ACCOUNT.CHECK] . . . . ------------------------------Paul ReeseIT ManagerPhoenix Systems Group IncYoungstown OH US------------------------------

When doing REST calls with MVIS, I understand how the u2version field works, get it when you read, and then send it back on updates so that MVIS can know if the record has been updated since you read it, implementing optimistic locking.  Wondering if there is a function that can be called from U2/PICK Basic to generate this same value manually.  We are working on some custom PICK code to read/write data in response to MVIS calls.  We'd like to use the same concept with the u2version field but calculated via PICK code on a certain item in PICK/U2.  We'd like to be able to generate this field manually for reads and then verify it on updates.  Should only add a couple lines of code to our existing routines if there is a way to easily do this from PICK.  Looks like maybe the CHECKSUM function would do this, just wondering if this would generate the same value as MVIS u2Version. EDIT: After doing some experiments with CHECKSUM looks like we might be able to do

Hello everyone.  I am new to the forum and have just upgraded to UniVerse 11.3.5.  I was told there is a tool MVX (Multivalue Performance Experience) that can be installed and was hoping to find out if anyone is currently using this tool.  I would like to know more about it, before I decide on whether or not to install it on my system.