Rocket MultiValue

Rocket Software is excited to announce the simultaneous release of DBTools 4.6.1 and U2 Common Clients 5.4.2, delivering a robust set of enhancements designed to elevate development, administration, and security across the UniData and UniVerse (U2) ecosystem.DBTools 4.6.1 HighlightsWindows Server 2025 Certification DBTools 4.6.1 is now certified for use with Windows Server 2025, ensuring seamless integration with the latest enterprise environments. Updated Eclipse Platform The suite now runs on Eclipse 2025_06 (Platform Version: 4.36.0.v20250528-2229), offering improved stability and performance. Advanced Security Configuration New parameters are available for enhanced OpenSSL control: SSL_SECURITY_LEVEL for setting OpenSSL security levels USE_LEGACY_OPENSSL_ALGORITHM for legacy algorithm support. These are compatible with UniData 8.3.1+ and UniVerse 11.4.1+. Improved XAdmin Configuration Support Parameters such as AUDIT_STARTUP_TIMEOUT, MAX_REP_GROUPS, and SELECTINDEX_RTN_STATUS ca

Hi community,Plateforme : windows server 2016, uv 14.1.1.1002, Over the past few days, we’ve been experiencing random errors on uv static files. The same error messages appear repeatedly — expected blink 0x0 or 0x10000.These errors can occur up to ten times a day and affect various files (e.g., VOC, XXPROCESS, XXPPP, etc.), the most strange is these files are mainly used for read.... To resolve them temporarily, we use fixtool -fix (at boot uv, else the files are locked). Does anybody have any idea what could be causing this?We’ve already checked our antivirus, but the problem persists.Any insights or suggestions would be greatly appreciated ;) With kind regards Manu

Greeting folks, I am loading the extension, setup the config as below; "db": {         // Hostname or IP address of U2 server.         // "host": "",         "host": "localhost",         // "host": "my.u2.server.local",         // "host": "192.0.2.1",         // Username used to log in over Telnet or UniRPC. Use an escape character for domain log-in. (\\\\ instead of \\)         "userName": "myusername",         // "userName": "DOMAIN1\\\\myuser",         // "userName": "myuser",         // Password used to log in over Telnet or UniRPC. RECOMMENDED TO LEAVE THIS PASSWORD BLANK.         // VS Code will prompt for the password when connecting.         "password": "mycorrectpassword",         // U2 account to LOGIN to.         "account": "MB",         // "account": "XDEMO",         // "account": "MVTUTOR",         // Data source is either "UNIVERSE" or "UNIDATA".         // If this value is changed, VS Code MUST BE restarted for it to take effect.         "dataSource": "UNIVERSE",

Follow the link below to the innovation forum. https://community.rocketsoftware.com/multivalue-innovation-library-home-11/expanding-on-universe-and-unidata-esearch-tool-to-use-python-based-regex-search-27332

Greetings all! Can someone please direct me to documentation to dictionaries in UniVerse and what each attribute is used for? Many THX! ~Doc------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

Hi everyone,  Just a quick reminder: starting tomorrow, Rocket Forum will be temporarily locked as we roll out an exciting transformation. We can't wait to welcome you back to a refreshed, more intuitive, and inspiring community experience on October 23rd. Here's what to expect: The Forum will switch to read-only mode from October 15th to October 23rd. You'll still be able to browse existing content, but posting, commenting, and liking will be paused during this time. After the improvement work wraps up on October 23rd, you'll gain access to the new, improved Rocket Forum, featuring simpler navigation, exclusive insights, and even more recognition for your participation. Important: Upon your first log in after October 23rd, you'll be prompted to reset your password. For more information about the changes ahead, please visit this page. If you have any questions, feel free to reach us at community@rocketsoftware.com. Thank you for being a vital part of our community on Rocket Forum.

Hi, I can see online documentation refers to The EDA SQL Server driver supports SQL Server 2014 and greater. Is there a driver to support SQL Azure. Thanks------------------------------[Darren] [Johnson] [Australia][Snr Dev Engineer]------------------------------

Is there any ETA on when MVSP for Linux - specifically .NET is going to be available? Thanks! g.------------------------------Gene BuckleSr. Programmer/AnalystPly Gem Pacific WindowsUS------------------------------

Enhancing Your Development Experience with New Features and Fixes in Rocket Software MV BASIC for VS Code 2.7.0 In the ever-evolving world of software development, staying ahead of the curve means continuously improving tools and workflows. We're excited to announce several new features and enhancements that will significantly boost your productivity and streamline your development process when using Rocket Software MV BASIC for VS Code. Separate Compile and Catalogue Option One of the standout features in our latest update is the separate compile and catalogue option. This enhancement allows developers to compile their programs independently from cataloguing them. By decoupling these processes, you gain greater flexibility and control over your development workflow. This means you can compile your code, test it thoroughly, and only catalogue it when you're confident it's ready for deployment. This separation helps in reducing errors and improving the overall quality of your software.

Hi, I can see online documentation refers to The EDA SQL Server driver supports SQL Server 2014 and greater. Is there a driver to support SQL Azure. Thanks------------------------------[Darren] [Johnson] [Australia][Snr Dev Engineer]------------------------------

Hey folks, Sorry for the continued PROC questions but the owner of our company loves them...groan! Question for y'all, is there anyway to create a unique list ID within PROC. like "SAVE-LIST LIST.NAME.PORT#" or ...? THX! ~Doc------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

Does anyone know of a quick way to print from OpenQM (Windows) on a HP OfficeJet Pro 9120e Series printer?------------------------------Jack YatesCIO/ConsultantUnited Refining CompanyWarren PA US------------------------------

Greetings, y'all! Is anyone aware of ERP/MRP systems available to the automotive aftermarket or performance auto parts? As always, thanks for your helpful replies... ~Doc------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

HelloI am testing the new-ish 'DT' conversion code in UV 11.3.5 (on RHEL8) and am having no success getting it to do what seems like simple conversions. I put together the following test code to give it a go: -- * Testing the new DT conversion code sys.VAL     = system(99)now.VAL     = now()local.VAL   = datetimel()utc.VAL     = datetimez() crt "NLS status : ":oconv(system(100),"S;'On';'Off'")crt "system(99) : ":sys.VALcrt "now()      : ":now.VALcrt "local      : ":local.VALcrt "utc        : ":utc.VAL lst.TESTS = ''lst.TESTS<-1> = "O": @VM: sys.VAL: @VM: "DT"lst.TESTS<-1> = "O": @VM: sys.VAL: @VM: "dt"lst.TESTS<-1> = "O": @VM: now.VAL: @VM: "DT"lst.TESTS<-1> = "O": @VM: now.VAL: @VM: "dt"lst.TESTS<-1> = "I": @VM: local.VAL: @VM: "DT"lst.TESTS<-1> = "I": @VM: local.VAL: @VM: "dt"lst.TESTS<-1> = "I": @VM: utc.VAL: @VM: "DTIS"lst.TESTS<-1> = "I": @VM: utc.VAL: @VM: "dtis"lst.TESTS<-1> = "I": @VM: local.VAL: @VM: "DT"lst.TESTS<-1

For those wanting to learn MVIS, I have created two (free) step by step guides to creating an MVIS/REST backed website. The first of these uses Vue 3, which is arguably (well I will argue) the most friendly of the client side typescript style of web frameworks, and the second uses Microsoft's .NET Blazor so you can take your pick. The guides will work with the U2 Trial Editions and the software is free. Some knowledge of TypeScript or C# would be useful but you can probably follow on without it. I've posted these on the new Rocket Innovations section, or you can download them from the Free Training section of my website (www.brianleach.co.uk). Have fun and good luck!------------------------------Brian LeachDirectorBrian Leach ConsultingChipping Norton GB------------------------------

A couple of posts outlining how I go about importing and exporting things, I use /etc/passwd as the example as I needed a script to move some users over. I have a bash script to do this but moving more of my workflow into Pick is my goal.  Importing into Pick: https://krowemoh.com/devlog/importing-linux-files-into-pick-.html Exporting out of Pick: https://krowemoh.com/devlog/exporting-pick-records-to-linux.html ------------------------------Nivethan ThiyagarajahProgrammerAsynchron Systems IncToronto ON CA------------------------------

Hello all - we are switching from one box (unix) to another (linux). We have some programs that check server IP, hostname, uname - to know if the user is addressing our test or production environments. Our question is does anyone know of a Unidata environment variable that holds this type of information we could query easily? Thanks for any ideas! Kathleen------------------------------kathleen hambrickProgrammerRocket Forum Shared Account------------------------------

A couple of posts outlining how I go about importing and exporting things, I use /etc/passwd as the example as I needed a script to move some users over. I have a bash script to do this but moving more of my workflow into Pick is my goal.  Importing into Pick: https://krowemoh.com/devlog/importing-linux-files-into-pick-.html Exporting out of Pick: https://krowemoh.com/devlog/exporting-pick-records-to-linux.html ------------------------------Nivethan ThiyagarajahProgrammerAsynchron Systems IncToronto ON CA------------------------------

Hi Guys, So we're migrating to D3 we have had initial success following the online documentation but just wondering if anyone else out there has done the same and has any tip or advise for a smooth transition. Thanks in advance Steve------------------------------Steven ReidDeveloperSandiford Solutions LtdManchester GB------------------------------

Hi sb users, I'll share a vsCode extension to edit Sbparagraph code.  Use a trigger on XXPROCESS to sync P type in a Directory.  Use sftp/sync to have it on the client Edit your code Use a ssh RUN program to sync back, copy into XXPROCESS, regen the process (like f2), run GC. It return ProblemMatcher info.  Capabilities : syntaxe coloris, all sb common vars, all SBExpression, all sbSubrs, Formater (indent), Hover, SignatureHelp. You can provide custom intellisensitems for Hover and Signature Help. I share all my expérience with pleasure.  Manu------------------------------Manu Fernandes------------------------------

The latest PE version is 8.3.2 I believe, is it possible to get a PE version of 8.2.4 if not I can work with 8.3.2 just asking as the version we are using in production is 8.2.4  and I would like to stay with our production version but if not that ok, just asking. thanks dougc------------------------------Doug ChancoUniverse ProgrammerSelf Registeredgraham NC US------------------------------

Hi All, We are facing issues with deferred server wherein we can see the error as "Subscriber has no alive RWs(2358)!". Could you please suggest what could be the possible reason behind this error. Thanks! ------------------------------Shubham NigamRocket Forum Shared Account------------------------------

Hi all We're doing some development on an internal test server which, unfortunately, has some expired certificates: The code: RESPUESTA=protocolLogging(NOM.FIC.LOG,'ON',10) RESPUESTA=setHTTPDefault('VERSION',VERSION) RESPUESTA=createSecurityContext(SECCONTEXT.HANDLE, PROTOCOLO.SEGURO) RESPUESTA=addAuthenticationRule(SECCONTEXT.HANDLE, SSL_CLIENT, SSL_RULE_SERVER_NAME, SERVER_NAME) RESPUESTA=addAuthenticationRule(SECCONTEXT.HANDLE,SSL_CLIENT,SSL_RULE_STRENGTH,'generous') RESPUESTA=createSecureRequest(URL.SERVICIO,TIPO.LLAMADA,HTTP.HANDLE,SECCONTEXT.HANDLE) MAX.CAB=DCOUNT(DATO.CABECERA,@VM) FOR C=1 TO MAX.CAB RESPUESTA=setRequestHeader(HTTP.HANDLE,DATO.CABECERA<1,C>,VALOR.CABECERA<1,C>) CRT ' Pasa dato en header [':DATO.CABECERA<1,C>:'] [':VALOR.CABECERA<1,C>:'] [':RESPUESTA:'] ' IF RESPUESTA#0 THEN GOTO 90 NEXT C RESPUESTA=setHTTPDefault('BUFSIZE',DIM.BUFFER) RESPUESTA=submitRequest(HTTP.HANDLE,TIME.OUT,'',CABEC

Watching videos, starting to use the cli. for example, I want to find the customers table (correct my terminology if you don't call them tables).  I entered "listf" didn't see a customers table. Saw users ...entered list users..saw the system users. Cool How do I find the accounts or folder where the customers /cust table lives? If you need more info, please let me know thanks ------------------------------Bret SternPresidentRocket Forum Shared Account------------------------------

This came up on Youtube today. Weird having this subject come  up on one of my channels. https://www.youtube.com/watch?v=pWZBQMRmW7k------------------------------Joe GoldthwaiteConsultantPhoenix AZ US------------------------------