Rocket MultiValue

We have a client that just installed Accuterm 8.0.1015 on both a Windows 11 23H2 OS and a Windows 11 24H2 OS and it appears they have done so correctly. However, when they open Accuterm the icons below the menu are simply showing up as empty blocks but the tooltips do work. Is this a setting or a compatibility issue. 

Hi. Below is the version of our product. Are we allowed to use the Rocket MV Basic in the Visual Studio Code to compile the program?Secondly. i try to enter the following infomartion in MV basic,  what is the account name mentioned below  Current Configuration PRODUCT EDITION VERSION QUANTITY OS TYPE OS VERSION SUPPORT   UV SVR 11.2.5 137 HPUXITANIUM 11.31 Active     SBR SVR 5.5.0 137 HPUX ALL Active     SBC SVR 6.6.3 20 WINDOWS 2022 Active    

I know this has been around for a while but we are trying to hook this up now… We are on Unidata 8.2. We’ve been told we need Unidata 8.3 to use VS with Rocket. I am looking to validate that information, or hear that someone on 8.2 does have it working.If we can’t use this - is there another full screen editor we can use on the unidata side?Thank you for the information and your time.

Hi there, Hope you can help :) We are currently running a (very) old version of jBase 3.4 and are experimenting on a test server to migrate our accounts to jBase 6.2.  Could anyone point me in the direction of some documentation for what we would have to do to upgrade our accounts assuming we have jBase 6.2 installed and working on the new server? Many thanks Mike Lankester

All,Currently we are extracting out JSON data character by character and saving the data in d3.  That works fine for small records.  But, now we are looking at converting a record with the size of 3,147,865.  Character by character manipulation of a string is very cumbersome.   Is there a JSON to d3 program out there that could handle this or does someone have any ideas?Ted Hurlbut

Hi!I’ve started to tinker with the Universe database of my company using uopy that allows me to run basic commands from a remote server.Is there a book or a formation to learn this basic?Asking AI I’ve been able to list the data of a file, but I would like to filter it by date. What is the formula?Thanks!

Trying to build and index and getting this error:04 BUILD-INDEX LOTIndex name:  SER#Locking 'LOT' file for exclusive use.Index file "INDEX.004" for key "SER#" is locked.  Aborting.File 'LOT' Unlocked. How can I unlock that index so  I can build it?

Good evening,Is there any plan to release a version for the VSCode extension MVBasic for Mac users that allow Online Editing? Thanks in advance… 

Creating a purge program.  First make a past on a stat file that has cust# and date to select appropriate records to purge into a “to purge” array (INSERT “AR”).Then, read through main file, using a locate on the array to determine if it was one selected.  If so, delete it.Issue is that the main file are from 1-5 records whose IDs begin with the cust#.  This file does not have a date to be used for purging.  The main file has almost 5M records.  The “to purge” array has 50k-150k cust#s in it.  The first pass to create the array from the stat file only takes 30 seconds even with 3M+ records.  However, reading through the main file, using a LOCATE (“AR”) is really slow.I would think that locating in the array would be faster than doing one pass on the main file and doing 4M+ reads on the stat file.   So, I was wondering if anyone had a better idea that would speed up the process.Universe v11.3.1.6022 running on AIX 7.2

Hi, Does anyone have some advise on how to optimise / fine tune MVIS response times on APIs given some latency when using OAuth?When changing the Http Auth type from basic (or even digest) to OAuth, I find my the response times on APIs increases significantly (as expected due to the additional token validation using the JWKS URL).I have response times using basic auth +-50ms going up to +-500ms on Oauth. Any idea if there are ways to cache the tokens on MVIS or other ways to fine tune this? The only solution we have for now is to bump up connection pools to increase capacity which is not that sustainable as we add more APIs to the server going forward. I have also played around with increasing timeouts and other config parameters on server and account level to delay failures on load. Or maybe something to consider for future in MVIS?Im using AzureAD as the Oauth provider. 

Hi,I develop solutions using SB+ and there are some common variables which are imported into just about every BASIC program that I have. Some examples are;       $INCLUDE DMSKELCODE COMMON      $INCLUDE DMSKELCODE STANDARD.EQU Can someone please tell me why my "INCLUDES" configuration is not working? COMMON Variables such as RECORD, WORK, CNT, USERDATA() etc are not detected and I get Errors in VSCODE such as;"Referenced undefined variable: RECORD" Please see below a redacted version of my configuration. I believe the key parts of the configuration, namely the ACCOUNTS and INCLUDEMAPPINGS are configured correctly. { "version": "1.0", // If you want to connet to a U2 server, you need configure the settings in "db" section. // If left these settings empty, you still can use most of the features. If so, // when try to connect to a U2 server, you need input these values in VS Code pop up input box. // For more information, p

Hi there.Hope you can help!I am trying to setup the profile so that when the user click clone on a tab it will autologin. I have tried recording a macro and then replaying the macro but this just opens a new window without connecting the terminal or logging in.If I go to script editor and press play it works as intended but I need this to work by right clicking the tab and cloning with an autologin. I am running AccuTerm 8.1 standard. Any help much appreciated!!Thanks

we are experiencing some strange reactions in Accuterm like : In a Textbox, Multiline, enabled with word wrap.   In the projects properties we have chosen the button that says “ Same as Tab, except for multiline text or command button” on the “traits” tab.    When we use some of these fields (nearly most) when we use the “RETURN BUTTON”  the field did noy simply do a line return but closed the screen down The same type of field on the first screen works ok as expected Grid boxes have problems when using Combo Fields on the first column

Hello all!I’m adding variable data type protection to a subroutine label in a program I’m working on. However, I’m experiencing unexpected behavior when using the `DESCRINFO` function.Here is an example:* Set up some stuff here...IF RUN.MODE = "AUDIT" THEN EQUATE NUM.REPORTS TO 10 DIM REPORT.COUNTS(NUM.REPORTS) MAT REPORT.COUNTS = 0 GOSUB PREPARE.UTILITY.REPORTSENDLOOP * Do stuff here...UNTIL IS.DONE * Do other stuff here, maybe write to a report...REPEATIF RUN.MODE = "AUDIT" THEN GOSUB CLOSE.UTILITY.REPORTSEND* Other code here...STOPPREPARE.UTILITY.REPORTS: * Prepare reports, calling SETPTR and HEADING/FOOTING... RETURN; * Internal CLOSE.UTILITY.REPORTS: * HERE LIES MY ISSUE; THIS RETURNS 1 (INTEGER) BECAUSE OF THE 'MAT' ABOVE IF DESCRINFO(1, REPORT.COUNTS) # 5 THEN RETURN END * Close reports, print 'no data found' message if count = 0... RETURN; * Internal* Some other subroutines here...END; *ProgramHere is another example, simplified:DIM ARR.1(10)D

Hello! I’m relatively new to UniVerse and Multi-valued databases, so my experience with BASIC is limited.I was writing a program with subroutine calls that I wanted to abstract via ‘@<var>’. This program had a “create output file data line” subroutine and a “finalize output file” subroutine. When I wrote these local subroutines (explicitly defined, not subroutine labels), I encountered an error where, when calling with ‘@’, only the first locally-defined subroutine would be found; the other subroutine would cause a runtime error, unable to be located. It was not found locally, and so the object database file (.O) was being searched, instead.For example:* ...IS.DONE = @FALSE* Main loopLOOP READNEXT FILE.NAME ELSE IS.DONE = @TRUE ENDUNTIL IS.DONE * ... OUPUT.FILE = "" PREPARE.DATA.SUBR = "" FINALIZE.FILE.SUBR = "" * case 1 BEGIN CASE CASE FILE.TYPE = TYPE.1 PREPARE.DATA.SUBR = "DO.SOMETHING.1" FINALIZE.FILE.SUBR = "END.FILE.1" CASE FILE.TYPE = TYP

I am receiving JSON from a third party and it contains a null value like below.  I call UDOGETPROPERTY for line_item_id and when I try to reference the return value I get Improper data type and my process terminates. How do I detect for the null value in the return value?  

While deleting file in UniVerse using TCL - I get Unable to open "RC.OE.UPD.COGS.LOG" file.”I verified file exists…Here’s o/p from TCL LIST VOC 06:32:11am  30 Nov 2025  PAGE    1NAME.......... TYPE DESC..........................RC.OE.UPD.COGS F    F.LOG1 records listed. ;CT VOC RC.OE.UPD.COGS.LOG                                                                   RC.OE.UPD.COGS.LOG                     0001 F                                      0002 RC.OE.UPD.COGS.LOG                     0003 D_RC.OE.UPD.COGS.LOG                  ;DELETE.FILE DATA RC.OE.UPD.COGS.LOG        Unable to Open/Delete : RC.OE.UPD.COGS.LOG  ;SELECT RC.OE.UPD.COGS.LOG                  Unable to open "RC.OE.UPD.COGS.LOG" file.   ;                                            

Is there a limit to the value length in a select statement?When I run:   SELECT OP.MANIFESTED.HIST WITH TRACK.NBR = "420015859261290986498138210077"I get multiple rows back with TRACK.NBR different from above. For example:420015859261290986498136795170420015859261290986498151260165420015859261290986498151221500Is there a limit to how many characters it’s comparing in the select value?Other explanations?I removed the indexes off a copy of the file and I still get the same result, so it’s not a bad index issue.

 Accuterm seems to allow greater that 31 days in a month for date fields !! Traits for a form - if we select return will wok in a multi line text box - we seem to just complete the form - not stay in the multi line box anybody seen these problems and are there answers ?

I have two bp file that both exist in Github: IO.BP and WEBAPPS.BP.  I have a subroutine in WEBAPPS.BP that I am updating in vscode.  It has this include statement “$INCLUDE IO.BP IO.INS”  vscode still shows all the variables using that file as undefined variables.  I have tried adding them to the includeMapping, but it still doesn’t fix it.  Both folders exist in c:\git-workspace\IO.BP and c:\git-workspace\WEBAPPS.BP.  This is for Universe. I also tried adding the folder to the workspace. How can I fix this in vscode?  

helloReally grateful for any assistance, I have been stuck on this for about 1 week now.I have SBXA working with unidata 8.1 sb+ 6.5 on windows 2012R2I have replatformed application to Windows 2022 unidata 8.3 sb+ 6.6.3i have Unidata server and separate commincation server. if i run :C:\Users\<mylogin>\AppData\Local\Apps\2.0\Y2N21CTT.YLM\D6JBB313.34V\sbxa..tion_74d57911d24a77ad_0006.0006_359984abce80fb3f\SBXAWinFxWindow.exeas administrator, intial connection fails: Unable to connect to SB/XAFailed to connect to the application because connecting to the account 'F:\AVANTE9\FLODATA\LIVE\LIVE.DATA.533' on the Application Server with address 'localhost' using U2 User ID 'IUSER\XXX' from the Communications Server failed.Details:[Rocket U2][UCINET - UNIRPC][ErrorCode=81016] The connection was refused as the RPC daemon is not runningSocket Exception caught and WIN32 API Error Code:10061 and Error Message:No connection could be made because the target machine actively refused it 127.0.0.

Using AccuTerm 8.1.1.1136 we are connecting to a windows 2022 server running OpenSSH server.  Connection works and we can log in but the AccuTerm escape sequences are hit and miss.For example we can issue the escape sequence to run on the caps lock without issue, but when running the escape sequence to turn off the caps lock nothing happens.  The sequences are “ESC:STX:L” for caps lock on and “ESC:STX:M” for caps lock off.I turned on data capture and can see the correct data getting sent for the caps lock on, but either nothing is sent or the wrong sequence is sent for the caps lock off.We can run “ESC:STX:?”, “ESC:STX:I” and get the correct responses.Trying to change the terminal size to 132 or 80 characters, “ESC:STX:E” and “ESC:STX:N” nothing will happen.We have tried running Bitvise instead of the Windows OpenSSH server and had similar results.Changes to terminal type, character set/code, SSH configurations and more have had no changes.While we are connecting to an OAS instance, I

Hello,I want to retrieve parameters of my command tcl in a proc.How can you this ?For example :I execute a proc named PROC01 with parameters.I want to know the parameters to use inside the proc.  A proc :PROC01001 PQ002 HSET-DEVICE003 <how to use parameters line command ?>004 PH005 ...  And execute this in prompt :: PROC01 6 In Basic programs, you can use tclread. But, with proc, how to do this ?  Thanks for your response, 

Hi All, Hopefully this is a quick one, that I did not want to trouble Rocket support with. I know that UV11.3.5 is certified for Windows Server 2019, we aim to get as many of our customers on Windows onto Server 2022. However, we may have some who want to stay on 2019. To your collective knowledge are there any issues in sticking with 2019 for UV11.3.5? Many thanks.

Hi Running uv 14.1.1 on Windows, we are waiting to receive the patch 1002 Hotfix. Meanwhile, how can we restart uvcleanupd.exe without restarting uv himself !  If I start it from a console, it works but not as a background process. Thanks for any sugg.  Manu