General Discussion & Announcements

Can anyone think of a real-world use for the field/value/subvalue positions of a SAVING Field in a select list? An apparent UniVerse implementation decision results with BY clauses leaving only the ID or SAVING value in the select list, and BY.EXP adding value, field, and subvalue (record.idVvalueSfieldVsubvalue as documented in the keyword section for BY.EXP in the User Reference). During the sorting phase of BY and BY.EXP, the information serves a purpose. After sorting, I do not believe it serves any purpose. So, is there a real-world use for the field/value/subvalue positions of a SAVING Field in a select list? The SAVING value becomes the record ID of a subsequent SELECT or LIST. The SAVING Field would need to be an ID of file where a field/value/subvalue position holds some correspondence with a next BY.EXP and the original file and SELECT. The record: >ed MV1 19A 4 lines long. ----: ^ Up-arrow display mode = enabled Top. ----: p 0001: 9^2538 (9 v 8) 0002: 7^2536^2535 (

Hi everyone,  Just a quick reminder: starting tomorrow, Rocket Forum will be temporarily locked as we roll out an exciting transformation. We can't wait to welcome you back to a refreshed, more intuitive, and inspiring community experience on October 23rd. Here's what to expect: The Forum will switch to read-only mode from October 15th to October 23rd. You'll still be able to browse existing content, but posting, commenting, and liking will be paused during this time. After the improvement work wraps up on October 23rd, you'll gain access to the new, improved Rocket Forum, featuring simpler navigation, exclusive insights, and even more recognition for your participation. Important: Upon your first log in after October 23rd, you'll be prompted to reset your password. For more information about the changes ahead, please visit this page. If you have any questions, feel free to reach us at community@rocketsoftware.com. Thank you for being a vital part of our community on Rocket Forum.

Im following the below elearning course, setting up the env for web development as mentioned in the bleow page, https://learn.rocketsoftware.com/local/login/index.php after finishing the config, created a project  --> DSP page with a dummy entity --> compile and test getting error "300 URD_MW_ERROR" Please help. ------------------------------Venkatesh KaliyaperumalRocket Software Forum Member------------------------------

Hi there, We're excited to announce that Rocket Forum is undergoing a transformation! Soon, you'll step into a dynamic, intuitive, and inspiring community space designed just for you. What's changing? Simpler navigation and a fresh look. More exclusive product insights and updates. More ways to connect with peers and Rocket experts. Recognition and rewards for your participation. A community shaped by Rocket Software values: Empathy, humanity, trust, and love. What you need to know: The Forum will be locked from October 15th to October 23rd. During this time, you'll still be able to view existing content, but new posts, comments, and likes will be disabled. The improvement work will be completed by October 23rd, then you'll be able to enjoy the improved experience. Learn more here Stay tuned for more details and helpful guides. If you have questions, reach us at community@rocketsoftware.com. Thank you for being a vital part of our community on Rocket Forum.-------------------------

Anybody know why this error would get generated when trying to EDA Convert a large file? Smaller files go thru fine and it seems it does not error at same point if I rerun EDA CONVERT on same file. Have ran the process numerous times on the same file and it seems to just choke 85-90% of the way.  Any suggestions are greatly appreicated. FYI using EDA Schema Manager 3.3.01 

Hi everyone, I'm currently trying to deploy to my AIX servers, but the deployment isn't going through. Could someone please guide me on how to check the connection from my IBM i server to an AIX or Linux server? Deployments to Windows servers are working fine. Thanks in advance for your help!

We have a file that is reaching the 2 gig limit and we need to convert it to either 64-bit or Dynamic. Which is better and why? JRI

Check out Rocket Software's latest insights on supercharging your mainframe development with containers! The blog explores how development containers streamline workflows by ensuring consistent environments. This means you can easily integrate modern tools with traditional systems. It's all about boosting agility, collaboration, and scalability in your projects. Dive in to see how you can bridge the old with the new and transform your development process! View the post here: https://www.rocketsoftware.com/en-us/insights/development-containers-mainframe-subsystem-application-development ------------------------------Que MangusRocket Forum Shared Account------------------------------

Hi community, I hope you're all doing well. I'm new to this forum and could use some guidance. Can anyone tell me which sub-forum is best for Exceed Turbo X users? I'm eager to connect with fellow users and make the most of my experience here. Thanks in advance! Best, Stefan

Hello Rocket Community, This message is geared towards our ChangeMan ZMF users. It has been a longer process than we anticipated, but we now have the Ideas (Enhancements) portal available. This is a different portal than what we had under Micro Focus and Open Text and as such the former Ideas needed to be migrated from the prior portal to new portal that Rocket Software uses. Unfortunately, many of userids attached to the Ideas were not migrated. When possible, the original author's userid were appended to the description. Also, because the Ideas portal is different from the ChangeMan ZMF Community Forum it will require a new registration and it's a different link: Rocket Software Customer Ideas Portal We have been able to add a link from the ChangeMan ZMF Community Forum page on the right-hand panel (Ideas and Enhancements), which will bring you to the new Rocket Ideas Portal for ChangeMan ZMF. Our apologies to all our customers and users, as this has been a long process. We thank you

Hello Rocket Software community, I'm currently working with Rocket UniVerse and have encountered performance issues when handling large datasets, particularly during peak usage times. It seems that the hardware configuration might be contributing to the problem. To resolve this, I am exploring ways to optimize both hardware and software settings, including utilizing Smart PC setups for smoother operation. Here are a few specific areas I'd appreciate feedback on: Smart PC configurations: Does anyone have experience using Smart PC setups for Rocket Software applications? Any configurations that helped with performance improvements, especially in database processing? Memory and CPU optimizations: Have you successfully optimized memory allocation or CPU usage when running Rocket UniVerse? Any insights on settings that can reduce lag or boost processing speed? High-load resource management: What steps have you taken to manage resources effectively when the system is under heavy load?

RELEASE ANNOUNCEMENT Rocket® Rocket® API and Rocket® Modern Experience 10.5.3   The Rocket Software team is pleased to announce that new and latest versions of Rocket Process Insights, Rocket API and Rocket Modern Experience are now available. Today's businesses rely on IBM® i & IBM Z® for running hundreds of critical applications that are vital to their operations. For those businesses, Rocket software's Continuous Modernization Kit will enable them to create a data-informed modernization plan that will immediately and positively impact business productivity and ROI. The Continuous Modernization kit comprises of Insights, Rocket API and Rocket Modern Experience. Rocket Process Insights provides an elevated level of awareness and data into their processes, helping businesses develop a modernization plan and evolve their IBM platforms without interrupting those important processes. Once you have end-to-end visibility of your business processes with Insights, leverage Rocket Modern E

I want to connect Eclipse from my local windows server to  remote ES region on azure linux server. So I can deploy the web service as well as run Eclipse in debug mode during testing.      What is the process for setup this?  Appreciate your help in advance!! Thanks Alam------------------------------Morshed AlamMFES AdminVoya Services CompanyBengaluru IN------------------------------

As part of your migration path, we have been slowly introducing Accuterm GUI calls from our TEXT screen subroutines. It all looks great and working well EXCEPT I cannot  bind the model forms or dialog boxes to the Accuterm Window displaying the Green Screen. I need to make the GUI forms and dialog boxes remain within the boundary of the green screen (Accuterm window) and more importantly ON TOP (always visible). If a user clicks anywhere on the green screen, then the GUI dialog/form disappears in behind the screen. Yes, is model so prevents the users moving forward but can anyone help me on this. I do not wish to call a script as there a lot of arguments passing between the green screen and GUI. It would make it beyond clumsy.  and secondly the splash screen ' This session is running a GUI application' appears in the middle of the green screen. The message has no use, is invasive and needs to be removed. Can anyone help with that also. Any advice will be greatly received.

Hi All,    I am working on V05 to V10 upgrade in Linux and currently performing the compilation of the code using cob64 and facing below issues. Appreciate your help with these issues, attached the compiler options used for reference.    1)  .so file not Created during Bulk compile    We are using the below command to compile the programs, the process is creating .int, .idy , .o and .so file during the compilation if I perform the task for one module by specifying the full name but only .int, .idy and .o is created if I use wildcard *.cbl to pickup all the program. Could some one please help with the correct option to create the .so files during bulk compilation.     cob64 -z -v -k ./SRC/*.cbl -N OBJ"/home/jenkins/loadlib/batload/" -a -g -C "USE(/opt/microfocus/EnterpriseDeveloper/cobol.dir)" -C "USE(/opt/microfocus/EnterpriseDeveloper/sql.dir)" -C "USE(/opt/microfocus/EnterpriseDeveloper/batch.dir)" -U   2) Compilation of Programs with special characters failing         Some of the pr

Subject: D3.py Installation Issues - Python 3.11 - Seeking Help Hi everyone, I'm struggling to get D3.py working with Python 3.11, and I'm hoping someone can help me troubleshoot the installation process. I've gone through the documentation, but I'm finding it a bit unclear, and I'm stuck at the very first step. Specifically, when I try to import D3.py in a Python session: import d3py I get the "ModuleNotFoundError: No module named 'd3py'" error. I've attempted to install D3.py using pip: pip install d3py However, this results in a "File not found" error, even when I execute the command from the directory where I believe D3.py is located. To ensure we're on the same page, could we please assume a clean setup? Here's my current environment: Python 3.11 is installed and working. I have a copy of D3.py (with the Python license). I suspect the issue might be related to how D3.py is installed or how Python is finding the module. I'm also confused about the .pyconfig file. The docum

Hi all, I'm currently using my laptop (Windows 11, and occasionally Linux Mint via dual boot) for some light Rocket terminal emulation work, mainly accessing UniVerse environments. While everything generally works, I've noticed some inconsistencies in performance and a few UI glitches in the terminal, especially during longer sessions or when switching between networks. I'm wondering: Is there an optimized setup or configuration for terminal emulation on Windows or Linux laptops? Any recommended terminal emulators or tools that work particularly well with Rocket environments? Are there specific settings (buffer size, fonts, encoding, etc.) that improve the experience? Does anyone here prefer Linux over Windows for this kind of work - and why? I'd really appreciate any tips or best practices from others using laptops for Rocket terminal emulation, especially for development or light production monitoring. Thanks in advance for any advice!------------------------------Tammy Gom

Hey everyone, Let he who is without sin cast the first... line of AI-generated code! 😜 So, I've stumbled upon a fun fact: Turns out, if you whisper the magic word "PICK" to Google Gemini, it'll cough up some code snippets. Forget I said D3, that was so last week and Gemini refers some other arb platform Does anyone else have some hilarious or surprisingly useful AI-assisted coding stories to share? Happy Friday, may your bugs be shallow and easily squashed! 🍻Stefano ------------------------------Stefano GallottaManaging MemberSimply Red Open SystemsMilnerton ZA------------------------------

I am trying to clone a ChangeMan ZMF git connector in Vs Code. It is getting errors from the git-remote-ZMF.exe. It fails with both the Rest Service 8.3.0 and 8.3.1 with hofix. S C:\\Users\\bre6052\\Git_ZMF> git clone ZMF://zmf_serzmfp/AT01000712 zmfRepo Cloning into 'zmfRepo'... Traceback (most recent call last):  File "git-remote-ZMF.py", line 1534, in <module>  File "git-remote-ZMF.py", line 1522, in main  File "common.py", line 378, in init_logging  File "logging\\__init__.py", line 2040, in basicConfig  File "logging\\__init__.py", line 1169, in __init__  File "logging\\__init__.py", line 1201, in _open FileNotFoundError: [Errno 2] No such file or directory: 'C:\\\\Users\\\\bre6052\\\\Git_ZMF\\\\Logs\\\\git-ZMF.log' [92348] Failed to execute script 'git-remote-ZMF' due to unhandled exception! fatal: remote helper 'ZMF' aborted session PS C:\\Users\\bre6052\\Git_ZMF> git clone ZMF://zmf_serzmfp/AT01000712 AT01000712------------------------------Lisa BrewerSenior System

Hi everyone. Like, I think, the majority of users of the forum, I'm receiving emails when something is posted on one of the forums of the Rocket's product I use (in my case, Uniface). Lately, on this particular thread (General Discussion & Announcements) it seems that there are a lot of posts seeking for support on particular technologies (Cobol, Red Hat, ChangeMan ZMF (?), etc.) that I think doen't belong in this part of the forum : "For topics unrelated to a Rocket product, such as general news, questions about the forum itself, etc." Is it because there are not forums for those technologies ? Or maybe there are no moderators to move topics in the right place ? Anyway, and all my apologies if I might look annoying, but opening lots of mail that doesn't concern me is a bit time wasting, and I think maybe other thinks like me. No offense to anyone who posted problem here :-) Thanks ------------------------------Jean-Marc SALISMp ServicesMontauban Cedex FR---------------------

Hi  I am concerned that upgrading our Red Hat Enterprise operating system from version 7.4 to 7.9 may affect our LGU license. Could you please confirm if the license will remain intact after the upgrade? Visibroker Version: 8.5.0. P7 Thank you! ------------------------------Ki Suk NamBusiness DptShiwa Soft Co., Ltd.seoul KR------------------------------

Hello, I created a new site in CMN global Admin and added this site to some application and defined the necessary libraries in Production tab.  However the install fials  CMN9800I - DIST TO ONTE (11) PACKAGE AP09000015 FAILED TO ONTE ON 2025/04/04 @ 07:56:28. CN(INTERNAL)                                                          looking into the jobs  I see an error fase 11 job IEF403I P0911X15 - STARTED      -    STEPNAME PROCSTEP    RC    -    JIE2BKP              04    -    JPE2BKP              00    -    CMN00                12    -    CMN99             FLUSH    and looking for the error I only see ChangeMan(R) ZMF      CMNBATCH - 8.2 Patch 6  2025/04/04  07:56:26             Attempting to initiate dialog with ChangeMan ZMF subtask                       Session established with ChangeMan ZMF subtask                                                                                                                SYSIN: AP09000015 11 PKG=CMNE.I.STG.AP09.#000015.PACKAGE                  

Can MF Cobol Express vsn 4.1 using a screen section and ADIS be run without change to the original source code? Can COBOL-IT be downloaded for testing?------------------------------Jack TearleownerRocket Forum Shared Account------------------------------

Do we support RKSIZE for LCHILD, in PSINDEX,VSAM ? Can it be ignore ?   *********************************************************************** * O U T S T A N D I N G D E A L SECONDARY INDEX * * HONGKONG * * 04/01/19 NEETHU DUPPAY :UPDATED LENGTH FROM 83 TO 99 * *********************************************************************** DBD NAME=II001ONF, X ACCESS=(PSINDEX,VSAM) SEGM NAME=IXQDIONF, X PARENT=0, X BYTES=99 FIELD NAME=(DIONFKEY,SEQ,U), X BYTES=27, X START=1 LCHILD NAME=(IXQDBDEL,IB001DEL), X INDEX=DIONFSRC, X RKSIZE=12, X POINTER=SNGL DBDUT0404W Unknown keyword, RKSIZE for LCHILD, ignored. DBDGEN FINISH END     Do we support  DSGROUP ?  or can it be ignore    FIELD NAME=(FDADT,SEQ,U), X BYTES=8, X START=1, X TYPE=C SEGM NAME=IXQDBSPR, X DSGROUP=B, X PARENT=IXQDBDEL, X BYTES=80, X PTR=(T)     [ims] Generating IB001DEL.dbd... [ims] DBDGEN starting [ims] DBDUT0404W Unknown keyword, DSGROUP for

Does any forum member know if you can upgrade to Universe, for free, from mvBase if you have an annual support contract in place for mvBase. I have reached our directly to Rocket but nobody has responded to me.  ------------------------------Richard OldsDirectorCalidore LtdUKrichard@calidore.comwww.caldiore.co.uk------------------------------