MultiValue Tools

Recently my menu/tool bars are missing when in the Wintegrate editor.  I've looked around and cannot find a way to get the bars back in the editor.  Is this possible?------------------------------Jason WiningerProgrammerRocket Forum Shared Account------------------------------

We use mvBase extensively, along with Accuterm (GUI). We need to re-platform to another mv product as mvBase is EOL. We were all ready to go down the OpenQM  route, then Rocket aquirred the product and all development seems to have stopped! ( We have been deliberating the move for some time.) We have  looked at jBase and D3.  Rocket are pushing us down the D3 the path. I don't see many posts about D3 improvements, it all appears to be Universe or Unidata. So my question is, what would be your platform of choice if you were moving away from your current mv version, or are you happy with your current platform for the foreseeable future (5+ years). Many thanks. Richard Olds------------------------------Richard OldsSnr DeveloperCalidore Computer Systems LtdGATESHEAD GB------------------------------

Can anyone suggest a video showing how to use a simple HELLO WORLD program in Visual Basic that can be executed and run in Visual Studio Code? I installed the Java JDK as instructed by the Rocket extension but when I run the program it keeps asking me to install the extension (even though the Rocket extension shows as already installed). My simple test program has a suffix of '.vb' but the Rocket instructions said it must be '.b'. Does that mean the extension is only for BASIC and not for VISUAL BASIC programs?!? When I did change my simple program's extension from '.vb' to '.b', I received this message from VSC which I don't understand or know how to correct: Java 11 or Open JDK 11 runtime environment is irregular. Please check your Java environment and settings. Thanks in advance to all who reply.Dan reply to Christian Bristow: Thanks for your reply but apparently, the extension referred to in Stack Overflow is no

Hello, I've looked online, and from what I can tell: there's no information on either of the question. We've run into an issue where a call is issued, but the operation is terminated or cancelled, but there's no way to signal the same to UniVerse. The other problem we've is: we "believe" we're hitting the maximum connections allowed, which leads to delayed responses on the front end as the call "waits" for the connection to become available again. I wonder is there a way to check the connection availability ahead of time, instead of just sitting there. Thank you!

Jeannette Shea September 17, 2024 Introducing a new e-learning module covering Rocket MVIS, the MultiValue Integration Server. MVIS, a tool for Rocket® UniVerse and Rocket® UniData® customers, that will help you extend busi

June 8, 2022 As a Sales Engineer, a question I often get from customers is, “Which API (application programming interface) should I use?” I usually will answer “It depends”. In this article I will discuss the APIs and the “depends”. Hope you’ll find it useful and informative. Of all the U2 APIs, I prefer MVIS because RESTful services have become a standard API interface that natively supports the nested data model. Many of our customers have replaced U2REST with MVIS, and are realizing the benefits of automation, integration, and ease of use. (a.k.a. “how to get your new features and applications to market faster”) In addition, many have found that it dovetails into their broader modernization strategy. This enables customers to develop web/mobile applications without needing to know about U2. Customers using ODBC with desktop applications l

Kathy Larson July 12, 2023 We’re pleased to announce the release of Rocket® AccuTerm® 8.1, an established terminal emulator for MultiValue applications. To improve its functionality and security, Rocket AccuTerm 8.1 now offers a seamless single sign-on experience, a true web version (i.e., with no hosted dependencies on Rocket Software) with features that match its desktop counterpart, and adherence to the industry's leading software security standards, including Synopsys Black Duck, Polaris, and VeraCode. These advancements mark a step forward for MultiValue terminal emulation, empowering users with enhanced productivity, accessibility, and ease of use. Single Sign-On With the release of 8.1, Rocket has

Is anyone able to connect to a remote server?I've added Rocket MV Basic 2.6.0 to VS Code. Have 'Open Folder'ed an empty folder, 'Initialize'd and 'Edit Server Config' setting... {     "datasource": "UNIDATA",     "servers": [         {             "address": "HOSTNAME",             "name": "HOSTNAME",             "username": "xxxx",             "password": "****",             "account": "demo",

We are running into interfaces with Shopify, who is moving to GraphQL as it's standard and Rest APIs  are considered legacy. I cannot find anything to indicate Rocket has any tools/basic subrotines to address this emerging standard? ------------------------------Nelson SchrothpresidentC3CompleteShop LLCHarrison OH US------------------------------

July 12, 2022 I’m happy to introduce to you the Rocket MV BASIC for Visual Studio Code Extension Feature Review series! In this series, I will cover useful features related to editing, compiling, and debugging using the Rocket MV BASIC for Visual Studio Code Extension. I’ll start by covering the editing feature, specifically formatting. Background Reading legacy BASIC code can be challenging because different developers have different coding styles, and BASIC language grammar is so flexible. The formatting functionality can help you unify the BASIC program style and improve readability. Recommended Configuration The formatting functionality provides you with more than 20 configuration options to choose from. To make your BASIC programs more readable and concise, I recommend that you consider using t

We are building an Net 6 API using UODOTNET to interface with a UNIDATA.we are using version 3.171.0.08 of the library dated 9-14-2016Data is coming back but  the value and attribute marks are using the same value and it seems to be a wide char value 65533 instead of the regular 253, 254.Code snipit:debugger output:Is there a newer version available(UODOTNET)?Has anybody dealt with this before?Thanks in advance for any assistence wih this matter.Dave Just Dave

MV folks, We have a GUI client that runs only in Windows to access our MV/Universe application - and am looking for input from other MV community members on Windows functionality / partition / whatever on a Mac for some users at a new customer.

We turn on work wrap in our Grids. However, we would like to programmatically force a line feed in a cell of the grid. We have not found the character to use to force this to happen. we would typically do: tmp.tab<1,row.ptr,col.ptr> = data.record<1,1>:data.record<1,2> we would like the data.record<1,2> to be on the second line in the cell of the table we have tried the pipe character (such as Combobox in a grid column).  Have not found this in the manual and/or several places online.------------------------------Jesse TilliaProman-ERP, Inc.West Seneca NY US------------------------------

One of my customers has several users who work on both the workstation at their desk and from other locations on a laptop.  Will the Personal installation allow for a single seat to be used for installations on two machines as long as they are only using one at a time?  Or will they have to use the Portable installation on a memory stick? Dale------------------------------Dale KelleyI'm it!Dale W Kelley IncHohenwald TN US------------------------------

I have installed the DBTOOLS BASIC DEVELOPER TOOL KIT but I am having issues. Here is some info and a couple of issues I am having and would like some suggestions or advice on what to do next or what I may have done wrong.  We went through the install steps and see these were installed. The BDT launches but fails to update the subroutines. I set permissions on the folder to /usr/ibm/uv/BP.O to write for everyone but it still fails. When connecting I get the following messages and click OK to update. I have set the permissions to the folder so that everyone h

I have one user who has severe mouse problems inside a spreadsheet that has been executed from AccuTerm.  If the same spreadsheet is opened from Excel itself or from the file explorer, everything works normally.  The problem is a severe lag in any mouse commands.  If the user clicks on a cell, it is 2 to 5 seconds before the cell that was clicked on becomes selected.  If the user tries to drag a selection in order to select multiple cells, there is also a severe lag. The user is on the latest version of Accuterm I have which is 8.1.2.1137.  The mouse pattern file is identical to what I and other people are using. Has anyone encountered this before?

Hi   I am now starting to role out the Accuterm Front-end developments, we purchased 3 licenses 12 months ago and have only used one.  Yesterday I tried to Activate a new terminal as the second of our terminals but    The activation screen just says  Internet access required at bottom - yes it has internet access but the Activation Button is grayed out   🙁

Is there a way to send an excel formula through a D3 dict item in an FTD command?------------------------------Colleen SiscoConsultantBusiness PC Consultants IncUpper Black Eddy PA US------------------------------

Hi, Recently upgraded a site to Unidata 8.3.1 on Win Server 2022. Tried running Phantom LISTUSER at ECL Failed to start PHANTOM.Phantom execution failed. checked permissions user has full control What trouble shooting can anyone recommend. Thanks ------------------------------[Darren] [Johnson] [Australia][Snr Dev Engineer]------------------------------

The Rocket® MV team is pleased to announce the availability of UniObjects for Python (UOPY) v1.4.0 on January 22nd,  2025. UniObjects for Python offers a wide range of benefits including: An open and extensible UniObjects client Remote access to MV servers in Python, great for developers who aren't familiar with BASIC Full stack development in Python: from web server (UOPY) to database backend (U2py) Ability to leverage the Python ecosystem including many 3rd party libraries Rapid application development UOPY v 1.4.0 enhancements and bug fixes: Enhancements Certification of UOPY on Python odd version numbers

After being unsuccessful installing the server side of AccuTerm 8 either from my Cisco VPN connection or from a local to the network workstation, Metro's IT department suggested that I install the AccuTerm client onto the server and try the "install server" step from there.  The results have been pretty much identical.  I have copied some screenshots below.  The process has completed only the establishment of the FTBP directory and the installation of FTPBPINST into that directory.  This leaves me with three questions:  Has anyone been successful in installing the server side of AccuTerm on a windows, (2022) server?  Is the windows server just not possible?  Is there a manual step by step process that I can follow to make this installation?  I sure would appreciate some help. Dale

After I converted to Windows 11, FT.IMPORT now hangs after the message "Converting spreadsheet.xlsx from Excel format for upload...".  I use this program constantly.  I'm also having some freezing issues when I use subroutines that show a GUI window.  I found the thread "Accuterm GUI lockup on windows 11" which strongly suggests upgrading to at least 8.0.1123 or 8.0.1127 as those versions have fixed some Windows 11 problems.  I currently have version 8.0.1023.  Is it likely that upgrading would solve the FTIMPORT problem too?------------------------------Steve HenkelDirector of ISRocket Forum Shared Account------------------------------

Hi, I'm Chase. I'm a Technical Recruiter for a company called The Guitar Center. You may have heard of us, been to one of our stores, bought some awesome gear from us, etc.  We're hiring for a Senior Retail Applications Engineer on a full-time, W2 basis (salaried + full benefits). I'm including the link to the job description here.  If you're interested in exploring this, let's talk! Some of the must haves for the role are hands on experience with (Rocket D3, UniData, UniVerse, QM) and Pick Basic/UniBasic)

Hi, one of the fun things to do with source code these days is to put it into version control. VS Code makes that easy. One of the biggest version control repositories is GitHub. However, MV basic languages languish in there as unidentified soup. eg the Rocket multivalue-lab home tab language break-down mentions not a jot of MV basic of any flavour. Linguist is the community project which supplies language syntax and ID for GitHub. Its grammar is very close to VS Code's (and the syntax part of the definitions can be controlled by Rocket corporate). Could it be possible Rocket will, one day soon, provide the Linguist definition for some or all of the MV basic flavours? Cheers.

I am trying to use the PictureBox in Accuterm to  display an image of a stock item. \\\\\\\\i can get an image displayed as created at the development of the Form but  can not find out how to change it per stock item. It is probably very simple but I cant see how ? Can anybody help please ? Chris Baxter ------------------------------Chris BaxterCB SoftIPSWICH GB------------------------------