Product Forums

Hi A strange behavior, we have a subr WI.LOG which call another subr GET.PORT which make a simple OCONV(0,'U50BB') U50BB run fine million times a day.  Sometime the session seems 'suspended' and PORT. STATUS LAYER STACK return GET.PORT at 0x000000000 !  After a while, the system continue... I suppose its a lock situation ! Semaphore lock ?  Is someone experience a subr call 'stopped' like this ?  Adress 0x000000 is strange ?  Thanks for any comment.  Manu BASIC run machine GET.PORT 0x00000000 BASIC run machine WI.LOG 0x00000028

We are running SB 5.5.3 and we frequently end up with orphan port assignments in DMSECURITY. We were advised to use the RELEASE.LICENCES process to make the ports in DMSECURITY available. However, it seems that the process is not treating the phantom processes correctly, it determines that these are orphan and releases them. The consequence of this is that when the phantom completed and tries to reschedule itself, it fails. We end up with a shortage of licenses, when we actually have licenses available, the message the users are getting is the following: Has anyone ever experienced this before and if so, how did you deal with it. Upgrading to a newer version of SB is not an option. Thank you. André Guindon

Hello everyone, i'am updating my server hardwarei'm going to have 256 GB , processor 40 cores, i have 128 users, and my D3 base current has 293 GBthis is my current pick0, what settings i should change for the new configuration D3 10.2 Linux name LINUX pick0nice 0user pickcore 77165824 10npibs 700nphts 120basic 0brkchr 00escchr 1babsbase 18abssize 708abslock onblkfid 4flush 10dwqnum 256clocal offrawdisk onflushers 4

Hi,I have a requirement where I need to read an XML file inside my project through engine-side Javascript and store that value in a structure. The XML contains the screen name and its function keys list.  However, I am not able to parse the XML file. Can anyone provide a solution for this?Below I have attached the code for your referenceEngine Side Javascript:-----------------------------collect_FunctionKeys_From_Xml_File(screenName){   const path = 'I have the given the full path of the XML file here';   console.log("Is Exists....", fs.exists(' XML path'));       try {        const xmlString = fs.readFile(path);        console.log("xmlString.......", xmlString);        const parser = new DOMParser();  --> I am facing issue in this line. I am not able to parse the XML         const xmlDoc = parser.parseFromString(xmlString, "text/xml");   

We are running SB on UniData on Linux.  There is a command in SB called LISTU.  It beings back: Port, Pid, Account Name, SB+ User, NT User, Login Date/Time Questions are: 1) Where does it get the Account Name?  I have found this to not be 100% correct, but still want to know. 2) Where does it get the SB+ User?  Again, this is not always correct, so what is it doing?

Hi all I have some URLs that have special characters, but the server takes them without issue. Example: https://narobialimages.s3.eu-central-1.amazonaws.com/images/Light+version-Customer+Service_Retail_2019_15.jpg My problem is when I try to get this URL from BASIC: URL.CARACTERES='https://narobialimages.s3.eu-central-1.amazonaws.com/images/Light+version-Customer+Service_Retail_2019_15.jpg'RESPUESTA=protocolLogging('/u2/quiter/POSVENTA5/&COMO&/HTTP_LOG_HECTOR_':TIME():'.log', 'ON', 27)RESPUESTA=createSecurityContext(SECCONTEXT.HANDLE,'TLSv1:min')RESPUESTA=addAuthenticationRule(SECCONTEXT.HANDLE, SSL_CLIENT, SSL_RULE_SERVER_NAME, SERVER.NAME)RESPUESTA=addAuthenticationRule(SECCONTEXT.HANDLE,SSL_CLIENT,SSL_RULE_STRENGTH,'generous')RESPUESTA=createSecureRequest(URL.SERVICIO,'GET',HTTP.HANDLE,SECCONTEXT.HANDLE)RESPUESTA=submitRequest(HTTP.HANDLE,30000,'',CABECERA.RESPUESTA,DATOS.RESPUESTA,HTTP.STATUS) The URL gets encoded: 10/22/2024 13:52:21 [ 11047 11046 ] createSecurityContext

Hi all, I am trying to find my way through the web of everything here. I have managed to get to the Visual cobol training course and that has attachments, the first being vctTraining.zip.When I try to download it, I am informed it contains a virus? and the download is blocked.

When setting up a data resource, and mapping dictionary items to the REST interface, seems like I'm only able to map one field at a time that points to a given attribute, in my case it's attribute 0.  We have composite ids, and have multiple dict items that point to attribute 0 with some conversions that pull out what that particular dict item needs.  Problem is that when I try to select say _id (attr 0) and other dict items that point to attr 0, it is deselecting the other dict items when I select a new one.  I'd like to have multiple of these at the same time, but not sure how to do that if it's possible.  In my screen shot, I'd like to select _id, sys_date and sys_time but can't seem to get them all checked at the same time.  Any advice welcome. UPDATE: I was able to get both the sys_date and sys_time working, but it doesn't seem to be running the conversion code and just shows the raw field.  When I run a list in TCL, I get the actual converted date/ti

Anyone seen this message appear??? Customer is running on 5.20.565? not sure about the 565... 

Hello everyone, I am trying to setup a Gitlab runner that will SSH from a RHEL into my z/OS USS and execute commands via Rocket Bash. But I am hitting some issues that seems like an encoding issue when my runner is firing the commands and is not getting read correctly on Rocket Bash Running with gitlab-runner 17.3.1 (66269445) on SSH Runner abc123asif, system ID: a_bcde123452c1 Resolving secrets Preparing the "ssh" executor 00:03 Using SSH executor... Preparing environment 00:00 /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'226@24724323120120320525211206@242205243@': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'226@227211227205206201211223^@206211^@242205243@': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'361367362': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'361': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'242226244243210205201242243': command not found /usr/lpp/Rocket/rsusr/ported/bin/b

I have git v.2.26.2-82 installed on uss, and it works fine until now for "usual" git commands like git clone, branch, commit, merge etc.I now try "git submodule" for the first time and it returns this error :(my userid is EPLMOH)bash EPLMOH@MVSS:~/work/DSC$ git submodule status fatal: 'submodule' appears to be a git command, but we were not able to execute it. Maybe git-submodule is broken? I have this $PATH:/bin: /usr/lpp/java/J8.0_64/bin: /usr/lpp/ported/python/bin: /bin: /usr/lpp/java2140/J1.4/bin: /usr/lpp/Printsrv/bin: /usr/lpp/Tivoli/tsm/client/ba/bin/: /usr/lpp/wmqi/bin/: /usr/lpp/lotus/bin: /usr/lpp/lotus/bin/tools: /local/eposd/notesdata: /usr/local/bin: .: /_PRDS/ZOAUTIL/SBGYZFS/bin: /u/eplmoh: /usr/lpp: /usr/lpp/IBM/MVSS/UssTools/git/usr/lpp/Rocket/rsusr/ported/bin/: <---- git /usr/lpp/IBM/MVSS/UssTools/git/usr/lpp/Rocket/rsusr/ported/libexec/git-core: <---- git /usr/lpp/ported/apache-ant/bin: /usr/lpp/ported/autoconf/bin: /usr/lpp/ported/automake/bin:Actual path to gi

Hi Everyone, I am trying to setup my Gitlab Runner to SSH into my z/OS and execute command using Rocket Bash. Bash version - 5.1 When the runner connects to the z/OS and executes command via SSH, am getting the error below: Running with gitlab-runner 17.3.1 (51203123) on SSH Runner 123bcaivz, system ID: a_bcde123472c1 Resolving secrets Preparing the "ssh" executor 00:02 Using SSH executor... Preparing environment 00:01 /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'226@24724323120120320525211206@242205243@': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'226@227211227205206201211223^@206211^@242205243@': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'361367362': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'361': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'242226244243210205201242243': command not found /usr/lpp/Rocket/rsusr/ported/bin/bash: line 1: $'{Za244242231a202211225a205225245@2022012422102

Hi All, I am trying out the vscode editor with the MVBASIC extension and I am having trouble with the compile command. Accuterm 8.1.0.1132D3Linux 10.3.4 ,  case-insensitive The compile command will only work if most everything is upper-case and the program will run in a case-sensitive mode which is not my choice. Thanks for the help.

We are getting this error when trying to connect to Unidata via a web service: [U2][UCINET-UO][ErrorCode=39129] How do I troubleshoot this error, any leads? André Guindon

Using U2.Data.Clent 3.1.1.1003, I'm receiving this error after the web service has sat for some time.  The Session.Status = 0 and Session.IsActive = true.  I there a way of knowing when the underlying connection has stopped?   U2.Data.Client.UO.UniSubroutineException: ' [U2][UCINET-UO]WIN32 API Error:10053An established connection was aborted by the software in your host machine.[Rocket U2][UCINET - UNIRPC][ErrorCode=81009] The RPC failed

i have FCService running ok on our almalinux 9.4 server, but i notice its binding to 0.0.0.0 which i'm sure is ideal when your D3 & Flashconnect are running on separate hardware. in our case they're on the same physical box, so i'd prefer if I could get FCService to bind to 127.0.0.1 instead. (like TLLicMgr does) is this possible? can i use something like a bind: command in flashconnect.conf? or maybe the port statement, instead of port 1505 would port 127.0.0.1:1505 work? thanks in advance!

Hi all,  I have been given the task of allowing users to auto login to a PICK database through Accuterm. I have been given a config ".atsc" file that when double-clicked starts Accuterm and has a tel-net connection ready to be logged into. I have recorded a Macro that allows the user to press Ctrl + F1 which then logs the user in. What needs to happen is when the config file named patmore.atsc is double clicked, the macro runs automatically after Accuterm starts. Any and all help would be greatly appreciated or if you could point me in the right direction. Haha Thanks Mike Lankester

Here is a record sample: The TESTING column is a multi-valued list, and the pipes represent actual SVMs for readability. I'm looking for a function that will return an associated boolean list indicating whether or not either '1400' or '9101' exists in TESTING, so... In this sample, if one is present so is the other, but that's not always the case. So a 1 should be returned if either exists in what is actually a subvalued list. EDIT 1: A subroutine would make this very easy, I know, but I don't have time for the administrative overhead that comes with developing/delivering one to PROD, so I need this to be "idescriptor" language. Also, there will be subsequent processing, based on a SUM() of the Y/N list for each record, which will be compared to DCOUNT(TESTING,@VM). EDIT 2: I think I found a solution. I didn't realize I could use the INDEX function on lists. Though it will require another step or 2 to get the final result, I think it will work.

I have this error trying to install LMe 6.7 I have the recommended space on all partitions, but the FS of /tmp tells me that it is too small. This is how the disk is partitioned, it should be noted that when creating partitions as LVM the same error happens.

Hi all I have some problems when connecting to servers using uopy, as the PATH variable is wrong. From the terminal console: >SH -c "echo $PATH" /usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/usr/uv/bin >SH -c "uv -version" UniVerse 14.1.0 When using uopy: cmd = uopy.Command() suffix = " " cmd.command_text = 'SH -c "echo $PATH"' cmd.run() print(f'{cmd.command_text} = {cmd.response.removesuffix(suffix)}') cmd.command_text = 'SH -c "uv -version"' cmd.run() print(f'{cmd.command_text} = {cmd.response.removesuffix(suffix)}') The output is: SH -c "echo $PATH" = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin SH -c "uv -version" = SH: line 1: uv: command not found What's the issue with the uopy connection having an incomplete PATH value?

back with another question, hopefully this is the last one! when we downloaded d3 linux 10.3.4 there were also three patch files available, 17, 18, & 19 is this a situation where patch 19 contains all the updates from prior ones? or is each patch its own standalone fix? basically what i'm asking is, do we have to apply every patch individually & in order? or can we just apply patch 19 and ignore the prior two? thanks in advance!

i'm working on a fresh install of almalinux 9.4 and d3 10.3.4, setting up a new box that we plan to migrate a much older d3 install onto within the next month or so. i don't have a ton of experience with alma (or centos7 which the old box is running, or any other rhel variants), so i'm kind of figuring my way through as i go. anyways the problem i've run into now is TLLicMgr is failing to start on its own, and i tracked it down to systemctl reporting that rslm has failed.  here's the error message i get when i do systemctl status rslm.service systemd[1]: Starting Rocket Software License Manager... TLLicMgr[1904]: Unable to create pipe</usr/lib/pick/.LS.NP3><17> TLLicMgr[1905]: Log file is not open TLLicMgr[1905]: Failed to Create File: Permission denied TLLicMgr[1905]: Failed to initialize. The logs may help identify the cause. systemd[1]: Started Rocket Software License Manager. systemd[1]: rslm.service: Main process exited, code=exited, status=1/FAILURE system

I am running AIX and ksh.  At the AIX prompt, I have: AIX $ which matches the value for PS1    PS1='AIX $ ' when I issue the SH command from Universe,  I get to the host system.  I can issue AIX commands (without issue I think)However,  the Prompt is NOT displayed.  It is just blank The shells are linked together: $ ls -al | grep 326868 # -r-xr-xr-x    5 bin      bin          326868 Sep 12 2023  ksh# -r-xr-xr-x    5 bin      bin          326868 Sep 12 2023  psh# -r-xr-xr-x    5 bin      bin          326868 Sep 12 2023  rksh# -r-xr-xr-x    5 bin      bin          326868 Sep 12 2023  sh# -r-xr-xr-x    5 bin      bin          326868 Sep 12 2023  tsh Does some configuration option ne

Hi everyone,   I have a client with a successful D3 10.3 Linux installation who needs to meet auditing requirements by testing their Disaster Recovery (DR) procedure. The DR test is an annual event where they spin up a Linux server with a D3 instance and restore their database and applications.   Rocket's policy, as outlined in the Rocket MV End User Handbook (page 28), states that when running D3 in a High Availability/Disaster Recovery (HA/DR) setup, matching licenses with unique serial numbers and identical configurations are required. This includes scenarios like using U2 Replication or any secondary mechanisms for failover, all of which need additional licenses.   My client is resistant to replicating their D3 Production environment and is also hesitant about the alternative solution of maintaining a separate D3 machine with minimal configuration. They’ve pointed out that Oracle allows a separate server setup "for the duration of their DR testing" free of charge. &n

Using a BASIC program, I need to read filenames and file dates from an AIX directory and compare them with names and dates held in UniVerse records. If the files are present among the UniVerse records then they need to be moved out of the directory and more files added from another directory. Any advice or code snippets much appreciated.