MultiValue Tools

The following was in the Output panel for the Rocket MV BASIC Language Server after connecting to the configured host:May 26, 2026 3:57:05 PM asjava.uniclientlibs.UniConnection nlsInitWARNING: Exception occurs, isNLSLocalesEnabled is true: Default is used:asjava.uniobjects.UniNLSException: NLS Map not found Is this a problem?There appear to be no connection settings allowing for the customisation of the NLS setup when connecting.

I am attempting to use Online mode of the extension to edit source code from the remote UV server. After connecting to the server, I attempt to expand one of the listed accounts.It processes for a while, and then displays a popup up notification in this format:mvvs:/{server}/{acct}/A.FILE.NAME The ‘A.FILE.NAME’ is a legitimate file in the account, but the file has no DICT level.This file is not a code library.The code libraries in the account are known.How can I configure the extension to not get stuck on this file?How can I configure the extension to ONLY consider the known files?

We’re excited to announce that Rocket® DBTools 4.6.2 is now available!Released on May 20, 2026, this update brings key improvements across XAdmin, EDA Schema Manager, Web Services, and Security, with a focus on reliability, visibility, and modern operations.What’s new in this release? We’re thrilled to bring OpenTelemetry to UniData with the release of version 8.4.1!XAdmin now includes a built‑in interface to configure OpenTelemetry (OTEL) and view OTEL logs, making observability easier and more accessible than ever. In addition, UniData 8.4.1 upgrades OpenSSL to version 3.5, delivering the latest security fixes and cryptographic enhancements to ensure continued compliance with current security standards - all configurable directly in XAdmin.OTEL in UniData 8.4.1 is only the start, with plenty of other great highlights in this release:Improved Administration & ReliabilityThe Data Encryption view now opens correctly for UniData connections, including scenarios where the master encry

The languge server that comes with Rocket MV Basic likes to complain about undefined variables in code such asfoo = 4bar = foo-1where it will say “Referenced undefined variable: foo-1” because it is detecting the minus operator as part of a variable name. Am I the only person experiencing this issue? Can this be addressed? It’s rather annoying as much of the code I’m looking at was last formatted with the Accuterm wED editor which did not enforce spacing around operators.

 We’re excited to share a new release of MV Basic for VS Code that delivers meaningful improvements, with a strong focus on jBASE environments.What’s ImprovedStronger jBASE SupportThis release significantly expands jBASE capabilities, particularly for online development. Customers can now more easily connect to jBASE servers, explore accounts and files, and work with data in real time. Configuration and build workflows have also been streamlined to better align with modern jBASE project setups.Smarter Developer AssistanceWe’ve enhanced in-editor guidance using official jBASE documentation, helping developers understand language features and behavior more quickly, without leaving their workspace.Better Configuration & Workflow FlexibilityCatalog, compile, and connection configurations are now more complete and consistent, making projects easier to set up, maintain, and share across environments.Improved Accuracy & CompatibilitySeveral fixes reduce false warnings and remove unnec

Is it possible to have a complete D3 integration in Rocket MVBasic for Vscode ?Actually, there’s only code integration for jbase and universe…and documentation is slighly different...

Good evening, I'm looking for software that, when I upload a song from my computer, will translate the language of the singer in the song into another language that I choose from the list of languages, but in the original voice of the singer himself.........

June 8, 2022 As a Sales Engineer, a question I often get from customers is, “Which API (application programming interface) should I use?” I usually will answer “It depends”. In this article I will discuss the APIs and the “depends”. Hope you’ll find it useful and informative. Of all the U2 APIs, I prefer MVIS because RESTful services have become a standard API interface that natively supports the nested data model. Many of our customers have replaced U2REST with MVIS, and are realizing the benefits of automation, integration, and ease of use. (a.k.a. “how to get your new features and applications to market faster”) In addition, many have found that it dovetails into their broader modernization strategy. This enables customers to develop web/mobile applications without needing to know about U2. Customers using ODBC with desktop applications like Excel, could now offer a RESTful services interface and not have to use VSG or HS.ADMIN to define ODBC access. Just like XML, JSON is a great

Hi!  I am using Cursor to code (more than just coding, Cursor excels in Agentic programming tasks, I find it better than VS Code).  Cursor is a fork of VS Code, but it does not use the official Microsoft Visual Studio Marketplace. Instead, it uses a community-driven registry called Open VSX. Rocket MV Basic extension is not listed as a valid extension, so I can’t install it from the Extensions tab.  Gemini tells me I have two alternatives to install the extension in Cursor:Option 1: Cursor allows you to import the extensions from VS Code. This option is not working for me. Option 2: Install it directly from a VSIX file, that should be downloadable from the Rocket MV Basic Extension on the VS Code Marketplace. But there is no link to download a .vsix file to install it manually.  So I’m stuck with the installation.  The best solution would be to add the extension to the Open VSX catalog, so it can be installed from the Extensions menu and updated automatically.  If not possible, can any

We have a customer using this old version of SB+ and they want modifications to a GUI screen to add a bunch of columns to a grid.  On the character screen, the first column is a dependent mv, and the second column is the controlling mv.  The prompt sequence on the screen has the dependent properly following the controlling mv.When regenerating the GUI form from the character version, the dependent properly shows to the left of the controlling mv.  However, when modifying the form in the GUI Form Builder, the dependent shows up on the left in the form builder but is moved to the right of the controlling mv when the form is executed.Is there a way to get this to consistently display the columns in the grid according to the prompt sequence in the screen definition?A little more info: The controlling mv is a product #.  When the product # is entered, the first dependent (that we want shown before the product #) displays @CNT as a line reference.  Then the second and subsequent dependent co

Hello everyone,I am trying to set a property on Label whereby moving over the label will change the mouse pointer to a hand. When the label is clicked it launches a URL - This is working.I was hoping there was a ATGUISETPROP control to do this but I cannot find one.Has anyone got any advice how to do this?Thanks. 

There is a new file called uoj.properties that controls logging and such for UOJ 5.4.3. I read the documentation and found this new required feature. However, the UOJ code does not read the file when deployed on Apache Tomcat. Rocket Software is working on a hotfix.The problem is that the logDebugLevel is set to INFO no matter what you set the file for. Because I have background process running like batch jobs, clean up temporary files in Universe, and running BIRT print jobs in UniBasic code. Each of those processes creates a log entry meaning I create about 43,250 minimum per day in the Apache Tomcat log files. Talk about be overwhelming data!Here is what the file looks like for me:ConnectionPoolingOn = MinimumPoolSize = -1MaximumPoolSize = -1OpenSessionTimeOut = -1IdleRemoveThreshold = -1IdleRemoveExecInterval = -1PoolingDebug = LogFilePath = C:\\Program Files\\\Apache Software Foundation\\Tomcat 9.0\\logs\\logRotationCount = 10logFileSizeLimitInKB = 10000logDebugLevel = OFFsslHostN

Is there a way to quickly find or navigate to a certain program by name in online editing? Search bar gives results only for the already opened programs. 

I’m trying to configure the db.mvbasic.json file for includeMapping.I’m wondering if the issue I’m having is because in our programs, our $INSERT lines do not contain the file name.  Somehow, don’t ask me how, regardless of which file the $INSERT is in, the compiler finds it and adds it.For example, here’s a typical line:     $insert ENVIRON_CONSTANTS.INS.IBASENVIRON_CONSTANTS.INS.IBAS is not contained within an actual Universe account, nor is it in the same file as the source code.  This is confusing me when configuring the includeMapping section.Here’s what I tried:I added my development account to accounts section:    "accounts": [        {            "name": "devbtr",            "path": "/home/dev/devbtr"        }    ],ENVIRON_CONSTANTS.INS.IBAS is located under /home/dev/cadsrc/INSERTIn the account devbtr, the VOC entry that points to it is CADSRC.INSERT     CADSRC.INSERT0001 F0002 /home/dev/cadsrc/INSERT0003 /uvdata/uv/D_UFD/home/dev/cadsrc is NOT a Universe account. I tried:   

Where can you download these clients? I can only find 5.4.2 and 5.4.1

HI all,  I have just recently upgraded from Accuterm 7 to the latest version of Accuterm 8.1.1.1134. I am currently having an issue if I attempt to run a second instance of Accuterm, the first instance of Accuterm is displayed. I have 2 Accuterm sessions saved on my desktop, the first open fine. When the second session is selected the first session displays. In settings I have checked the option to "open sessions in a new window instead of a new tab". any suggestions would be gratefully received. thanks George.

Hi All,I am trying to download a TIFF file to my PC using FTSEND subroutine with MODE = K,O,B but the file downloaded is blacked out like below attached although with same number of bytes.Any suggestions please? 

Please be aware the Rocket MV BASIC extension for VS Code (MVVS) release v2.9.0 has a minimum requirement of JDK v17 and not v11 as suggested in the documentation. If the MVVS v2.9.0 environment has a pre-17 JDK, the extension will fail to start with pop up message:"The Rocket MV BASIC Language Server server crashed 5 times in the last 3 minutes. The server will not be restarted. See the output for more information."and"Server initialization failed". We will be releasing an update to documentation and product error handling as soon as possible. 

I know this has been around for a while but we are trying to hook this up now… We are on Unidata 8.2. We’ve been told we need Unidata 8.3 to use VS with Rocket. I am looking to validate that information, or hear that someone on 8.2 does have it working.If we can’t use this - is there another full screen editor we can use on the unidata side?Thank you for the information and your time.