IBM i Modernization

Has the RDi plug-in been tested against RDi 9.9 that was released today?I tried installing it and get this error:Cannot complete the install because one or more required items could not be found.Software currently installed: Rocket DevOps for IBM i Team Repository (64-bit) 10.4.0.v202409041507 (com.aldon.team.rdi_64.feature.group 10.4.0.v202409041507)Missing requirement: Rocket DevOps for IBM i in RSE 10.4.0.v202409041507 (com.aldon.RDi75 10.4.0.v202409041507) requires 'osgi.bundle; com.ibm.etools.systems.migration2 0.0.0' but it could not be foundCannot satisfy dependency:From: Rocket DevOps for IBM i Team Repository (64-bit) 10.4.0.v202409041507 (com.aldon.team.rdi_64.feature.group 10.4.0.v202409041507)To: org.eclipse.equinox.p2.iu; com.aldon.RDi75 [10.4.0.v202409041507,10.4.0.v202409041507] 

One user has a PC with larger monitors that run at high resolution and when they run a Jwalk client in Full Screen mode it is not proportionally scale. Instead you end up with a relatively small area for the IBM i interface (approx 30%) and a vary large boarder (the remaining 70%)Is there a setting I can adjust to change this to improved the way the Jwalk client scales?We are using Jwalk v42c9 as a locally installed client, with a copy of all the panels stored with it on a Windows 11 PC.  Any advice would be much appreciated.Steve BThe Friendly Techie

I’m playing around with the vs code plug-in and have noticed some VERY odd behaviors.I’m using version 11.1.0 of the plug-in and version 10.4 of RDOi.When I right click on an item in the subset filter and select Create, it submits the compile job but I get a “davidg8 check job or spooled file failed. (Internal error).” message.  A “Error: (SSH) Channel open failure: open failed” message shows up in the output tab of the console. After that message shows up, the PRTFCREATE spool file is displayed but flickers.  If I close the terminal window, the terminal window reappears with the same spool file.  This happens for a while until it finally stops.  I tried to upload a screen capture, but the forum software won’t let me.

In RDi, I have LM(i) filters by user, object, and task#.  In VS Code, all I've managed to find is a list of every task# since the beginning of time.  How do I set up LM(i) filters in VS Code like I have in RDi? Thanks

Periodically, when I start up RDi 9.8.0.6, with the Rocket plug-in version 10.4.0.v202409041507, all my filters in the RDOi subsystem will be gone.Sometimes they will reappear if I create one new filter.Most of the time, however, I have to recreate my filters.The last time this happened (today), I noticed this in the .log file…!ENTRY com.aldon.team.core 4 4 2025-12-10 07:34:35.583!MESSAGE Error setting project, 'CATALOG'!STACK 0java.lang.NullPointerException at com.ibm.etools.iseries.subsystems.qsys.api.IBMiConnection.getConnectorService(IBMiConnection.java:1823) at com.aldon.team.iseries.internal.cmsbridge.CMSBridge.isUseSSL(CMSBridge.java:450) at com.aldon.team.iseries.internal.HostAS400.creaeAS400(HostAS400.java:969) at com.aldon.team.iseries.internal.CMSConnection.<init>(CMSConnection.java:74) at com.aldon.team.iseries.internal.CMSConnectMgr.newCMSConnection(CMSConnectMgr.java:144) at

Hi,As we all know, modernization isn’t a one-time project. It’s a journey. Rocket’s IBM® i solutions go beyond basic point tools. They’re a unified platform designed to support your modernization journey, from first steps to full-scale transformation. On December 10, I presented a webinar with Robin Barley-Waegener in which we covered: Why Rocket’s IBM i platform is more than the sum of its parts.  How our latest innovations support developer productivity, operational resilience, and business agility.  How to use the Modernization Index to benchmark your progress and build a roadmap for what’s next.  How we’re simplifying API integration and enabling AI.  Real-world success stories from IBM i customers modernizing faster, smarter, and with less risk.  Modernization doesn’t happen by accident — it happens by design.  Whether you'

  RELEASE ANNOUNCEMENT Rocket® iCluster 9.4.0   The Rocket Software team is pleased to announce that the new version 9.4.0 of Rocket® iCluster is now available.   Rocket iCluster high availability/disaster recovery (HA/DR) software solutions ensure uninterrupted operation for your IBM i applications, providing continuous access by monitoring, identifying, and self-correcting replication problems.   Rocket® iCluster 9.4.0 adds more features to the user-friendly Web UI, improves the performance of the iCluster core a

I hope everything is going well.A question about creating a Jira Token and connecting it to the RDOp DevOps Portal: what are the minimum permissions required or must it be a full administrator?SincerelyMiguel

Folks: Add this to the enhancement request list please... When checking out a source based item, create an empty source member in the source physical file. If the source member is not created, the RDi plug-in can't open the item. david ------------------------------David GibbsSr. Software Developer - WorldpacOwner / Operator - midrange.com------------------------------

What's the latest plugin for use with RDi 9.8.0.6 and Aldon 10.4?  I'm running 8.2.800.  Also, how do I update? Thanks

I've been working with the RDi plug-in for a few months now and find it quite useful ... that said, I do have a few recommendations for improvements. Move (or copy) the create object / compile option from the Team submenu, when you right click on an item in the RSE tree, to the top level.  Strictly speaking, compile isn't a change control function and it's probably the most frequently used. Add an option to the popup menu to set the RDi connection jobs library list to the library list that would be used to compile the member.  This will allow the outline view to find copy members.  I currently have a command defined in RSE that runs ACMSLIBL to set the library list, but I have to define multiple commands and run the one that is appropriate for the program I'm working on. Avoid running operations on the Eclipse UI thread, as it causes RDi to lock up (even if only briefly).  Spawn new threads or use the Eclipses job functionality.  This applies to openin

Folks: I'm working on a program that's checked out to another developer. I can edit the program without a problem, but the compile option is disabled. I can submit a compile from the green screen. I have the program checked out to another developer because I'm using objects & copy members that they are working on. Any way I can get the compile option enabled in the plug-in? Thanks! david

Hi! Is there a simple way to move objects from one application to another? I have not found anything inside devops, but maybe the is an external command? (I hope :o) ../Åke Nordahl

Folks: I'm a newbie to vscode (and Aldon for that matter). I've got vs code 1.103.0 installed with the rocket devops extension version 10.5.0. If I insert a deliberate error in my code, and use the 'create' option on the member in my subset, no errors are shown. The output log shows this ... CPC1221:  Job 177398/DAVIDG8/ACMSCREATE submitted to job queue ESSBASE in library JOBQLIB. CMS9911:  Program ACMSCREATE completed successfully.  The highest CMSnnnn message severity received was 0. But the create report (PRTFCREATE) shows this ...                RNS9309 50  08/13/25  08:08:08  ACMSOBJCRT  Compilation failed. Module MODNAME not created in library DEVLIBNAME.

I'm trying to install a plug-in for Aldon in RDi 9.8 and Aldon Version 8.6.  Is there one that works with both?  We had the plug-in working on RDi 9.6.  I've tried RocketAldonEclipsePlugin8.2.801.zip, Rocket DevOps Eclipse plug-in 10.3.0.zip, Rocket DevOps Eclipse plug-in 10.4.0.zip and Rocket DevOps Eclipse plug-in 10.5.0.zip.When I try to install the ones available I get the following  errors. Or something similar.  Cannot complete the install because one or more required items could not be found.Software currently installed: Rocket DevOps for IBM i Team Repository (64-bit) 10.5.0.v202505142256 (com.aldon.team.rdi_64.feature.group 10.5.0.v202505142256)Missing requirement: Rocket DevOps for IBM i UI 10.5.0.v202505142256 (com.aldon.team.iseries.ui 10.5.0.v202505142256) requires 'osgi.bundle; com.ibm.etools.iseries.edit 0.0.0' but it could not be foundCannot satisfy dependency:From: Rocket DevOps for IBM i Team Repository (64-bit

RELEASE ANNOUNCEMENT Rocket® Rocket® API and Rocket® Modern Experience 10.5.3   The Rocket Software team is pleased

RELEASE ANNOUNCEMENT Rocket® Rocket® API and Rocket® Modern Experience 10.5.3   The Rocket Software team is pleased

What happens when doing a rollback of a dist. set from production if the set was never deployed?

I am running RDI Version 9.8.0.4 (20250303_1557) and we have Rel 10.2        Rocket DevOps core for IBM i running on V7R5M0 with TR level: 5 and I am hoping there is a plugin to RDI so I can use the 5250 emulators less for code Promotion and deployments....etc.

Couldn't see how to search existing discussions, so I hope this isn't a duplicate question.   We had a couple of people retire recently (we are not looking for contractors or others at this time).  They still own objects in Dev Ops Core for IBMi.  Is there an easy way to transfer these objects to an existing user so we can remove them from the developers and user lists? ------------------------------Kevin MonahanSenior Solutions DeveloperDestination Xl Group, IncCanton MA US------------------------------

Hello all My customer's IT Audit team notices that user profiles ICLUSTER and DMCLUSTER have all special authority (*ALLOBJ , *AUDIT, *IOSYSCFG, *JOBCTL, *SAVSYS, *SECADM, *SERVICE, *SPLCTL)  and asks me if all these are REALLY needed?    From my less-than-a-year experience with iCluster, I'm fairly certain that *SAVSYS, *IOSYSCFG, *SERVICE, *SECADM are not needed but am ready to  be told I'm wrong.    May I ask which special authorities are essentially for these 2 user profiles to work without any hiccup as I need to adjust them for a bare minimum that IT Audit team asks for?         Thanks. ------------------------------Satid SingkorapoomIBM i SMERocket Forum Shared Account------------------------------

Hello Rocket Team, I hope everything is going well; Where can I find the quarterly Rocket DevOps videos or seminars? I only have the link for Q423 DevOps Customer Enablement. I'd like to see the ones from 2024. Please help me by telling me where I can find them so I can review them. I have some questions about Git integration. These videos might help me. I would appreciate your help about this request. Meet virtually with Cisco Webex. Anytime, anywhere, on any device.

Rocket iCluster will stop working properly on IBM i V7R4 and V7R5 when IBM PTF SJ03017 is installed.   Background: The parameters of the QUSLOBJ API have been changed in PTF SJ03017 which causes the iCluster command DMMRKPOS to fail. Affected iCluster versions: All Guidance: Do not install PTF SJ03017 until iCluster is patched Fixed in version: iCluster 9.3.1 (scheduled for May 2025)  

Posting some comments from a customer in hopes of starting a conversation.VS Code has been available now for some time and there are some powerful Extensions (plugins) that have become popular for development on IBMi.One of the popular Extension we're using internally is 'Code for IBM i'.  While reviewing current conversations (e.g. Ryver, other Open Source for I resources...) we've seen some users exploring this as an alternative to Rational / RDi and use of Plugins for Eclipse (currently supported for both LMe and LMi).I've used the Code for i Extension locally for some dev work while using its emulator for direct LMi actions (Checkout, Create, Checkin, Task association - 5250j required on the i). Also like the nifty PASE connection option for work in the shell environment.

Hi , I have a requirement where I need to right click it will show paste and paste, content should text area. I have a paste page the embedded script in the action Is way to paste content in the textarea. Can anyone suggest a solution to this?. Below I have