Rocket® Enterprise Suite

Problem Is POWERBUILDER supported in Enterprise Analyzer 3.5 and beyond..? Resolution The support for POWERBUILDER was withdrawn in Enterprise Analyzer 3.3. The support will not be provided in any later versions.     Incident#2677400#Powerbuilder#SupportTip#EnterpriseAnalyzer

Problem : Is there an easy way to input mainframe CICS definitions into Enterprise Analyzer? Resolution : The process would be done part on the mainframe and part on the PC. On the mainframe, - Extract a CICS resource definition file on the mainframe source system.  (The process will run on the mainframe and is called DFHCSDUP.)   On the PC, - Transfer the file to the PC from the Mainframe using the same methods as you would for any other source file. - Add the extracted file to any Enterprise Analyzer project/workspace as a PCT file and an FCT file and verify. - This process could be automated to use Batch Refresh Process   Incident#2665665#BatchRefreshProcess#SupportTip#FCT#PCT#EnterpriseAnalyzer#CICSDefinitions

Problem When installing Enterprise Analyzer the following error is reported in the install.log Installing using command 'C:\\Users\\lyn3435\\AppData\\Local\\Temp\\VSD7BCA.tmp\\DotNetFX40\\dotNetFx40_Full_x86_x64.exe' and parameters ' /q /norestart /ChainingPackage FullX64Bootstrapper' Process exited with code -939523550 This stops the installation, how can this be avoided..? Resolution This is basically caused by the inclusion of the DotNet functionality within the Windows installation & updates The problem is fixed by installing Windows 7 Service Pack 1 and then installing Enterprise Analyzer again.     Incident#2663784#Windows7#Installation#EnterpriseAnalyzer#Pre-requisites#SupportTip

Problem When verifying JCL, although DSNUPROC is available under system programs it is still showing on the Unresolved Report. How can the entries on the Unresolved report be removed? Resolution The process is - Open WORKSPACE OPTIONS - Open VERIFICATION tab - Click on JCL in the left hand pane. - In the right hand pane, under SYSTEM PROCEDURES, right click and ADD - Type  DSNUPROC  and then press enter. - Make sure this new entry is checked on with a tick in the selection box. - Click APPLY - Click OK When your JCL is verified, this should remove the unresolved references to DNSUPROC.     Incident#2665400#SYSTEMPrograms#EnterpriseAnalyzer#UnresolvedReport#SupportTip

Problem Does Enterprise Analyzer support Oracle .SQLJ files/syntax.? Resolution There is no support for Oracle .SQLJ files/syntax in Enterprise Anlyzer 3.5. There are no plans to include this support in future releases.     Incident#2678431#Oracl#EnterpriseAnalyzer#SupportTip#SQLJ

Problem : Does Enterprise Analyzer support Object Oriented COBOL ? Resolution : The current product, Enterprise Analyzer 3.5, does not support Object Oriented COBOL as standard. Level one analysis could be created with the use of Architecture Modeller. Incident#2664188#ArchitectureModeller#EnterpriseAnalyzer#OOCOBOL#registration#SupportTip

Problem : Does Enterprise Analyzer support Dykalore 280 (.DYL files) ? Resolution : The current product, Enterprise Analyzer 3.5, does not support Dykalore 280 files as standard. Level one analysis could be created with the use of Architecture Modeller.   Incident#2665586  #SupportTip#ArchitectureModeller#EnterpriseAnalyzer#registration#Dykalore

Hello All, I am new to Micro Focus enterprise server. I am working for a client who is changing his current vendor. Micro Focus enterprise server is installed and setup on the old vendor's servers, I have to install a new copy of Micro focus enterprise server on a new server with similar configurations that present in the old setup. Is there a way in micro focus to export all the settings in a file or something and later import in the new setup.  Urgent responses would be highly appreciated.#EnterpriseServer

Hi all, I am Giorgos Nakos from Greece and i am currently supporting  a mainframe migration project to Microfocus Enterprise Cobol on a Linux Server. Currently there are some Java online and batch applications that make use of the JZOS utilities to access VSAM files on mainframe. How could we perform the same on the Microfocus environment ? How will it be possible for Java applications to read and update VSAM files ? #EnterpriseServer

Hi All, In our current setup we have OPC scheduler on mainframe which is the key scheduler and it triggers jobs on mainframe and micro Focus enterprise server. We are looking to shutdown OPC on mainframe and replace it with a scheduler on Micro Focus ES to trigger jobs on mainframe and Micro Focus E.S using this scheduler on Micro Focus ES. Can any body provide some pointers in this direction 1. Does Micro Focus E.S provide a scheduler which can replace OPC. 2. How the scheduler can be setup to use the current setup in OPC#EnterpriseServer

The issue: I am using Enterprise Developer 2.1 and am trying to create a Micro Focus Environment on our Sandbox, which is in a VM environment. I’m using Microsoft Windows Server 12. I am working with the tutorial -->Tutorials: Interface Mapping Toolkit - Mainframe<--. I have Visual Studio Professional or higher, as that is needed in order to generate the test clients (Windows or ASPX test client generation will fail if you’re not using Visual Studio Professional or higher). I'm am at the "Deploy" step on the IMTK tutorial but am getting errors such as these in the Micro Focus Generator log file:   ??? INFORMATION (LEVEL 0) MESSAGE# IG-VM-23043-00-I The optional CARDIN input file was not found. (Information message only). Input file '.\\CARDIN' not found. ??? ERROR (LEVEL 8) MESSAGE# IG-INFRA-19400-00-E Searching for RULEFILES(MERNDRVR), found an invalid directory 'D:\\Program'.   ??? ERROR (LEVEL 8) MESSAGE# IG-INFRA-19400-00-E Searching for RULEFILES(MERNDRVR), found

Problem: User receives Invalid Object Name when working with Enterprise Analyzer workspace built on SQL database.  Log files show several DBERR messages which can include some of the following: Error [4884,1] - DBERR : Invalid object name 'Workspacesettings'. Error [4884,1] - DBERR : Invalid object name 'dgrScopeRels'. Resolution: Issue related to the case sensitivity of the table names in the SQL database.  In some cases, EA is looking for dgrScopeRels when the table is called DgrScopeRels.  The same could also apply for Workspacesettings and WorkspaceSettings. The solution is to disable case sensitivity for the SQL database and make the entire instance case insensitive.  This operation would need to be performed by the database administrator.#SQL#MSSQLServer#MSSQLExpress2008R2#SQLServerExpress#EnterpriseAnalyzer#SupportTip

In the implementation of the Micro Focus Enterprise Application Developer, the message occurs "Data invalid license. Reinstall is necessary."#EnterpriseDeveloper

This is a small code sample of Natural code using Adabas. Library name is HOSPITAL but no changes are needed to the default Workspace and Project settingsHospital.zip#SupportTip#Education-Training#SourceNatural#EnterpriseAnalyzer

The zip contains a Java application that interfaces with COBOL. There is documentation that describes how to present this information and how to set up the link.JavaToCobolEA34.zip#Education-Training#EnterpriseAnalyzer#SupportTip

Problem: You need to confirm that an environment variable as seen by Visual Studio is what you expect it to be and matches the value in Enterprise Server. Solution: Process Explorer is not part of Enterprise Developer.   This is a Microsoft utility that you can download from: http://technet.microsoft.com/en-ca/sysinternals/bb896653.aspx For example, if you wanted to check the value of COBDIR, you would: Run process explorer Bring up Mainframe Explorer in Enterprise Developer (version 2.2 ) Check the value shown for COBDIR in Process Explorer Compare that to the value in Enterprise Server’s Env.Vars.* *To see the Env.Vars in Enterprise Server             1. Start the region in Enterprise Server à Details àESMACàJESàEnv.Vars.#MainframeExplorer#EnterpriseDeveloper#EnterpriseServer#MFDS#processexplorer#Env.Vars.

En la ejecución de la aplicación Micro Focus Enterprise Developer, se produce el mensaje "Datos de licencia no validos. Es necesario reinstalar".#EnterpriseDeveloper

The scenario: I have created a Service Interface. When I click "Deploy" to deploy the Service Interface I get the following results: Starting deployment Generating COBOL module Compiling COBOL module Compilation complete Generating manifest Generating the deployment package Contacting the server Sending deployment file to server 500: Unable to create unique directory "C:/Program Files (x86)/Micro Focus/Enterprise Developer/deploy/CICSScreenWs.s54O4TDc": Permission denied I do not have administrative rights to put the deploy contents into the C:\\Program Files(x86) directory or any of its subdirectories.  How can the  C:/Program Files (x86)/ directory be changed to another directory so this deployment can complete successfully ? The upper-level directory can be changed in this way: The top-level deployment directory is configured in the deployment service and its associated listener.   The resolution: The top-level deployment directory is configured in the depl

This is the sample of source code that is used for standard training. It is IBM COBOL with JCL and CICS screens and transactionsEA Training Source.zip#Education-Training#source#SupportTip#EnterpriseAnalyzer

I'm trying to create an STR file for a complex file.  Occurs varying up to 263 with 4-5 redefinitions in the occurs.  Can I avoid hand entering the same redefinition information in each 263 occurs? #Structurefile#STR#EnterpriseDeveloper

Hi, Is there a way we can restrict access to certain files to certain users/group in Catalog option (on left hand side menu under ESMAC)? I am working on a requirement where we want to give access to only certain user/group on certain files. E.g. Group A - cannot access files or access only in 'Readonly' mode for the files having first 2 qualifiers as DRRX.PROD.* Appreciate if anyone could share a step-wise process/procedure to achieve this or solution closer to this requirement. Thanks,#EnterpriseServer

Problem: Enterprise Analyzer is delivered with specific database tables within its repository. The fields defined for Business Rules Technical and Business Descriptions, default to 4000 characters. If a larger description field is required, how can this be completed.? Resolution: A "plug-in" has been developed to enable the Technical and Business description fields to be extended to 6000 characters. View:http://community.microfocus.com/cfs-file.ashx/__key/communityserver-wikis-components-files/00-00-00-00-86/2625.BRM.plugin.xml] ( NOTE : this plug-in can only be used on Enterprise Analyzer 3.3 with Hot Fix 10 or above installed) To use the plug-in... - Place the attached file ( BRM.plugin.xml ) into the <Enterprise Analyzer installation directory>/PLUGINS directory. - Navigate to the <Enterprise Analyzer installation directory>/BIN directory, and run RESCAN.EXE "As Administrator" - When the Workspace Configuration dialogue is displayed, click the OK button and let the

Problem: Is there any documentation that details step-by-step instructions of how to Configure Access to a Remote DB2 Repository / Workspace Resolution: Attached is a document that gives step-by-step details of how to Configure Access to a Remote DB2 Repository / Workspace 7002.Remote DB2 Repository Configuration.docx Related articles : How to build a DB2 Repository / Workspace   Incident# 2649337  #Workspace#Repository#DB2#EnterpriseAnalyzer#SupportTip

Problem : Although a valid license is installed for Business Rules Manager, when using Enterprise Analyzer Interactive Analysis, the Business Rules options do not appear from the VIEW menu.  What can cause this problem..? Resolution: This problem is usually caused by a licensing issue. To check for valid a valid Business Rules  Manager License.. - Open MF License Manager > License Management System - Open the LICENSES tab - A valid EA BRM license should be listed.   If the license is valid, then this could be caused by a missing Enterprise Analyzer configuration option. To check this... - Open Enterprise Analyzer Administrator - From the ADMINISTER menu, choose CONFIGURE ..... ENTERPRISE ANALYZER - Scroll down to the PRODUCT section - Make sure the BUSINESS RULES MANAGER option is checked ON - Scroll down to the LICENSING section - Double check that a valid license for Business Rules Manager has been picked up / installed. (NOTE : You can't set the LICENSING opti

Problem: Is there any documentation detailing a step-by-step process to create a DB2 repository? Resolution: The resolution is assuming that a valid and working installation of DB2 UDB is installed and accessible. Attached are 3 documents detailing the process required to create a workspace in a DB2 Repository 1. Create DB2 Database Create DB2 Database.docx 2. Create DB2 Schema and Table Space Create DB2 Schema-Tablespace.docx 3. Create DB2 Workspace Create DB2 Workspace.docx  Related Articles : How to Configure access to a Remote DB2 Repository / Workspace   Incident# 2649337#DB2#EnterpriseAnalyzer#Repository#Workspace#SupportTip