Rocket® D3® and jBASE®

We have a client that just installed Accuterm 8.0.1015 on both a Windows 11 23H2 OS and a Windows 11 24H2 OS and it appears they have done so correctly. However, when they open Accuterm the icons below the menu are simply showing up as empty blocks but the tooltips do work. Is this a setting or a compatibility issue. 

The proper way to start D3 Linux 10.4 is: systemctl start d3svc We have run into instances where someone is starting is using D3_setup start, which starts it in foreground, not as a service. OK for debugging, but the problem is that if that thread disconnects or is killed, the entire VME crashes. This is much like starting D3 Windows from a command prompt using d3vme /debug, then closing the command prompt.  So please use systemctl instead of other methods.

There is a bug in the MVS Toolkit (or at least we believe it's the Toolkit) where if you use an OpenSSL version higher than 1.1 to generate a .PKCS12 document, it appears to create just fine, but when you install that in the Toolkit, HTTPS does not work. Rocket is working on this problem, but so far we have not been able to identify what or where the problem is. Meanwhile, I suggest that you use OpenSSL v1.1 or lower to generate your keys, certificate requests and certificates. While we're on the subject, I've worked some cases recently where people generated a private key that was not an RSA private key. It needs to be an RSA private key or the world won't like it. If you have any questions about any of this, or if you want some help with certificate generation (or anything else with the Toolkit for that matter), please open a support ticket and I'll jump on it right away and give you a hand.

Hi there, Hope you can help :) We are currently running a (very) old version of jBase 3.4 and are experimenting on a test server to migrate our accounts to jBase 6.2.  Could anyone point me in the direction of some documentation for what we would have to do to upgrade our accounts assuming we have jBase 6.2 installed and working on the new server? Many thanks Mike Lankester

Ok,  chasing my tail for a bit on this one.   RC = 5061.10 LL = 5061.1 IF LL = RC THEN CRT "WHY, THEY ARE NOT EQUAL" END They don't match!  why does it drop the 0 on the compare?  What is the correct way to fix. ------------------------------Craig CurtisSystem ProgrammerSevier Valley School DistrictRichfield UT US------------------------------

All,Currently we are extracting out JSON data character by character and saving the data in d3.  That works fine for small records.  But, now we are looking at converting a record with the size of 3,147,865.  Character by character manipulation of a string is very cumbersome.   Is there a JSON to d3 program out there that could handle this or does someone have any ideas?Ted Hurlbut

As I sit here waiting for another Windows update for our MVS Toolkit, I wonder again, and I do mean again, why there is no Linux version for this part of the tool. We stopped using MS Windows over 20 years ago, but had to go and get  a licence and set up vm server to run Windows so that we could interface with the web. Where have all our problems been? On the Windows server. Now if there was a Linux version available, we may have had to set up a vm anyway, but it would have worked a lot better and saved a lot of technician time.

Due to some security issues, the D3 installers' ability to automatically download dependency packages is no longer available. This makes it necessary to load dependencies manually before running D3_setup. Here are the instructions:First, disable D3_setup's attempt to load dependencies:mkdir /usr/lib/pick  ( if /usr/lib/pick doesn't already exist )cat /dev/null > /usr/lib/pick/d3depends  ( if the depends file doesn't already exist )==================================Manually loading dependencies on Linux versions 7 and lower:D3 Linux versions 9.2 and lower:yum install dialog.i686yum install glibc-develyum install ncurses-develyum install libgcc.i686yum install net-toolsyum install gccyum install pam-develyum install pam-devel.i686yum install glibc-develyum install glibc-devel.i686yum install libuuidyum install openssl098eyum install hal-libsyum install libid

Hi there.Hope you can help!I am trying to setup the profile so that when the user click clone on a tab it will autologin. I have tried recording a macro and then replaying the macro but this just opens a new window without connecting the terminal or logging in.If I go to script editor and press play it works as intended but I need this to work by right clicking the tab and cloning with an autologin. I am running AccuTerm 8.1 standard. Any help much appreciated!!Thanks

 Accuterm seems to allow greater that 31 days in a month for date fields !! Traits for a form - if we select return will wok in a multi line text box - we seem to just complete the form - not stay in the multi line box anybody seen these problems and are there answers ?

Just putting this out there. I’ve had a couple of cases where people upgraded D3 to 10.3.3 or 10.3.4 and started having weird problems with MVSP. In both cases, we upgraded MVSP to 1.8.21 and it solved the issue. When upgrading D3, it’s not good to simply restore your existing MVSP account, especially if you’re going to 10.4. Anybody out there ready to upgrade, please contact me so I can get you the MVSP 1.8.21 version and help you install it. The reason it’s not posted in the RCP Downloads is because the pseudo tape is NOT a patch but rather an account-save, and the steps are different. We can post all day long, but afraid that the instructions will not get read and someone will try to use it as a patch.Most of you know where to find me (bcram@rocketsoftware.com) and many of you already have my cell phone number. If you can’t get to me by other means, just reply to this and I’ll reach out.

Hello,I want to retrieve parameters of my command tcl in a proc.How can you this ?For example :I execute a proc named PROC01 with parameters.I want to know the parameters to use inside the proc.  A proc :PROC01001 PQ002 HSET-DEVICE003 <how to use parameters line command ?>004 PH005 ...  And execute this in prompt :: PROC01 6 In Basic programs, you can use tclread. But, with proc, how to do this ?  Thanks for your response, 

Is there any ETA on when MVSP for Linux - specifically .NET is going to be available? Thanks! g.------------------------------Gene BuckleSr. Programmer/AnalystPly Gem Pacific WindowsUS------------------------------

A couple of posts outlining how I go about importing and exporting things, I use /etc/passwd as the example as I needed a script to move some users over. I have a bash script to do this but moving more of my workflow into Pick is my goal.  Importing into Pick: https://krowemoh.com/devlog/importing-linux-files-into-pick-.html Exporting out of Pick:

Hi Guys, So we're migrating to D3 we have had initial success following the online documentation but just wondering if anyone else out there has done the same and has any tip or advise for a smooth transition. Thanks in advance Steve------------------------------Steven ReidDeveloperSandiford Solutions LtdManchester GB------------------------------

Watching videos, starting to use the cli. for example, I want to find the customers table (correct my terminology if you don't call them tables).  I entered "listf" didn't see a customers table. Saw users ...entered list users..saw the system users. Cool How do I find the accounts or folder where the customers /cust table lives? If you need more info, please let me know thanks ------------------------------Bret SternPresidentRocket Forum Shared Account------------------------------

I read through the documentation and compared it to what I am seeing on the system. There is a DEVICES record called OKIDATA.  This has control character definitions and such. In the USER-COLD-START, there is a STARTPTR 0, 0, 0, S13 & STARTPTR 1, 1, 0, S10 and other for the rest. There is also an ASSIGNFQ 1,OKIDATA (C If I do LISTPTR I have several printers, 0, 1, 2, 6 and 7 and all say serial and DEV or PROCESS # is 13, 10, 11, 14 and 9.On the server itself, the OKIDATA printer name is OKI-C711-DCA9AC. How is the OKI-C711-DCA9AC assign to the OKIDATA?  I am thinking it is something to do with a configuration somewhere for the Dev or Process, but not sure what.  Any help would be greatly appreciated.------------------------------Troy DittbernerPresidentNorthstar Data Services IncBrooklyn Park VA US------------------------------

We're excited to announce the availability of the Rocket® MultiValue Developer Assistant. This AI-infused assistant enhances MV BASIC proficiency and developer productivity. See below for key features and requirements. For more details, read the Developer Assistant datasheet and register to gain access. The MultiValue Developer Assistant version 1.1.0.0, integrated within the VS Code® Integrated Development Environment (IDE), allows you to: Generate MV BASIC code via natural language queries. Autocomplete MV BASIC code. Explain MV BASIC code in natural language. Generate comments for existing MV BA

We're excited to announce the availability of the Rocket® MultiValue Developer Assistant. This AI-infused assistant enhances MV BASIC proficiency and developer productivity. See below for key features and requirements. For more details, read the Developer Assistant datasheet and register to gain access. The MultiValue Developer Assistant version 1.1.0.0, integrated within the VS Code® Integrated Development Environment (IDE), allows you to: Generate MV BASIC code via natural language queries. Autocomplete MV BASIC code. Explain MV BASIC code in natural language. Generate comments for existing MV BA

Before upgrading 10.4.0 or earlier versions of D3 Windows, shut down and do a "standard" uninstall of D3. This will leave all of your data and Device Manager settings in place. This is necessary because of a bug in the 10.4.0.1 installer which will not allow installation of the D3 services once the upgrade is complete.------------------------------Brian S. CramPrincipal Technical Support EngineerRocket Software------------------------------

I opened case 01108919 for the subject. In few words: fresh installa works, update not. Cause:  a lot of files are not updated. Best regards Stefano------------------------------Stefano MaranSenior programmerGTN SpATavagnacco IT------------------------------

Hi everyone, I'm very new to Host Access and D3. We're currently working in a D3 Pick environment using the TCL (Terminal Command Language) prompt, and I need to learn everything from scratch. I do have access to Rocket Software's D3 reference manuals, but they're quite large and a bit overwhelming to read cover to cover. Could anyone please suggest the best places to find learning materials - especially video tutorials that cover basic concepts, TCL commands, creating simple programs, and understanding how everything works with real examples? I really prefer videos or more practical, hands-on resources rather than just manuals. Thanks so much in advance for your help!----------------------------

A Collaborative Hub for Modernization and Big Ideas We're excited to launch the Rocket MultiValue Innovation Library - a dynamic, shared forum where MV developers, architects, and innovators can showcase and exchange forward-thinking ideas, prototypes, use cases, tools, and more. This is your space to Share groundbreaking concepts Contribute working demos or prototypes Explore real-world use cases Collaborate with the broader MV community Whether you're looking to modernize legacy applications, experiment with new integrations, or simply spark inspiration, the Innovation Library is designed to accelerate innovation across the MV ecosystem. Join us in building the future of MultiValue — one idea at a time.

A Collaborative Hub for Modernization and Big Ideas We're excited to launch the Rocket MultiValue Innovation Library - a dynamic, shared forum where MV developers, architects, and innovators can showcase and exchange forward-thinking ideas, prototypes, use cases, tools, and more. This is your space to Share groundbreaking concepts Contribute working demos or prototypes Explore real-world use cases Collaborate with the broader MV community Whether you're looking to modernize legacy applications, experiment with new integrations, or simply spark inspiration, the Innovation Library is designed to accelerate innovation across the MV ecosystem. Join us in building the future of MultiValue — one idea at a time.