Rocket® U2 | UniVerse & UniData®

MultiValue Experiences version 1.1.1.510 has been released on January 28 2022 for the below platforms/versions:AIX POWER       7.1,  7.2RedHat Enterprise Linux Intel       7,  8Windows       Windows 10,  2016,  2019This product is available to order immediately via your Rocket software provider or by logging into your RBC account at https://rbc.rocketsoftware.com or https://rbcint.rocketsoftware.com.Additional Product Information is available on the Product Availability Matrix at https://rbc.rocketsoftware.com/matrix.asp or https://rbcint.rocketsoftware.com/matrix.aspFor any questions on product availability, please contact u2askus@rocketsoftware.com.

hello folks,On large system running hundreds of users on the same application, very often I am faced with uniBASIC runtime errors in generic subroutines for which I do not have the source codes. Most of the time the problem is due to badly initialized variable by the calling program.The difficulty lies in identifying the calling program, knowing that errlog refers to the subroutine without showing the callstack.Does anyone have any idea how to capture the callstack and determine which program to fix?Here some samples from errlog :  Bad data “14/0/21” for conversion “D2-”. Unconverted data used for selection.​ Program “SB.EVAL.EXP”: Line 276, Variable “$R95” previously undefined. Empty string used Program “SB.GEN.DRIV.I”: Line 548, Nonnumeric data when numeric required. Zero used. Program “SB.EVAL.EXP”: Line 121, Nonnumeric data when numeric required. Zero used

Are there any UniVerse utilities that would show the commands run from a specific port?  When certain problems arise, this would be a great troubleshooting tool. One scenario would be to track activities from TCL at that port. Another scenario would be to track activities run from the initial TCL-launched programs It would also be helpful to have the date and time of those commands.  If not a utility, what U2 BASIC functions/commands exist that might be utilized in a monitoring program? Thanks in advance for any feedback.Nelson------------------------------Nelson SchrothpresidentC3CompleteShop LLCHarrison OH US------------------------------

Connecting via ODBC, getting an error code of 39204.   Familiar with 39202, (which is usually invalid chars in passwd), but haven't seen this before and can't seem to find it in documentation.    Google search found a few references, but none that seemed pertinent - and there's nothing in this forum regarding it.I suspect that it has to do with user/domain authentication, but that's more hunch than fact based.So, that being said - can anyone point me to what this error code means?Thank you.------------------------------Allen EgertonDeveloperSS&C Technologies IncCT US------------------------------

Hi allFirst time posting...Im connecting successfully to universe, using uopy.connect. with the session i can run a command on the server, however every subsequent call to the server calling cmd.run() (please see below) results in the following error:UOError: Error [39207] : Error occurred on server. Possible client-side licensing failure.Note: this only happens  the second time, also calling uopy.connect takes an awfully long time to return, is this normal?My code: session = uopy.connect(**config) cmd = uopy.Command(cpmmandtext) cmd.run() print(cmd.response)​

We have test and production accounts on the same system, which is to say that they reside in different paths on HP-UX.When the test account was first created, it was a clone of the production system with adjustments in various places to reflect the different paths.But our main files, ORDERS, PAYMENTS, and some others, are distributed files, and the distribution algorithms are equivalent on both test and production, as are the number of partitions.So, here are the questions:a) Can I refresh the data on test by simply copying the individual data portions from production to test?b) I recently fixed one broken file by copying the affected partfile from production to test, but maybe I didn't really.  It seems to work, but maybe I'm missing something.  I don't know for sure.  How can I be sure?c) And what about the stub files?  Are there even stub files on UV?  Do they contain the paths in which they were configured?d) Where can I find the latest, on-line documentation about this?-----------

Hi Folks,First time posting here, but I've been working with UniData for about 5 years now after mostly working with MySQL and Oracle databases.    We get UniData through a VAR, but I'm pretty sure they think I'm crazy so hoping to get some wisdom from the community here.I've got a computed column ADDR.G82.SANITY.CHECK defined asSUBR("CC.G82.ADDRESS.SANITY.CHECK",COUNTRY,STATE,ZIP)The subroutine opens another entity and selects against it to try to match postal code first letter to province and state to ZIP to see if addresses look "sane".If I use the computed column in SELECT criteria with an active list, it fails with wildly wrong results.  However, if I execute a SELECT ADDRESS WITH COUNTRY = 'CN' SAMPLE 1000SAVE.LIST CNADDRGET.LIST CNADDRLIST ADDRESS COUNTRY STATE ZIP WITH ADDR.G82.SANITY.CHECK = 'Y'<<lists 922 correct records>>Trying it with SELECTGET.LIST CNADDRSELECT ADDRESS WITH ADDR.G82.SANITY.CHECK = 'Y'<<returns two records, not 922>>Th

Forgive me if this question has already been asked/answered but I couldn't find a way to search for this on the forum for Universe only.When debbugging a Universe program by putting DEBUG, or multiple DEBUG statements, in the program, then running the program.  Sometimes the program will break on the first DEBUG statement hit but then will not break on any other DEBUG statements and finish running the program.  To resolve this I've had to put input statements in the program and then CTRL-BREAK to get into the debugger.  This is very annoying.  Has anyone else run across this issue or know how to fix the issue?Thanks,Harry------------------------------Harry HambrickSenior Software DeveloperRooms To Go IncSeffner FL US------------------------------

I've noticed that output from my python routines that are called from universe programs doesn't go into the COMO whilst any output from the universe program does.  Anyone noticed this, found an easy way round it?------------------------------Neil SherwoodAnalyst ProgrammerHSBC Global Services (UK) LimitedLondon GB------------------------------

We use the WIN.LOOKUP subroutine often to provide pop-up boxes to allow for list selection by the user.  There is one main limitation for which we have not found a work around and have been trying for many years..  We are using v6.4.0.When the list exceeds 9 choices (and some of ours have 50+), we need the routine to allow for a 2-digit user entry.  Unfortunately, it will not, so to get to "85", a user must type "8" SEVEN times.  This shortcoming almost always causes entry errors and/or unnecessary  help-desk calls.Has anyone found a way to handle this requirement?  A different subroutine?  or is it just a limitation has has not ever been addressed?Appreciate any thoughts.------------------------------Nelson SchrothpresidentC3CompleteShop LLCHarrison OH US------------------------------

I am looking at getting started with creating custom GCI functions on  UV 11.3.3 (RHEL7 installations).I know nothing about c programming or compiling so am looking for feedback on how to get started (specifically with GCI - I figure I can pick up the c stuff as I go).Has anyone worked through getting the example GCI functions  built and integrated with UV?I have already learned that I needed to install the glibc-devel package in order for the compiler to be happy it has all the includes.Now I am stuck with the following:root@h1133# pwd/usr/uv/gcidirroot@h1133# make -f Make.gci gci_hellogcc -Iinclude -m64 -DU2_64_BUILD -fPIC -m64 -DU2_64_BUILD -DTHREADS -DFASTIO -DUSE_STDARG -DU_LINUX -DU2_LINUX -D_GNU_SOURCE -fPIC -Wimplicit-function-declaration -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DNETwork=2 -DRAID -DUNIVERSEon -DU2SVNURL="/uvuddb-uv113/release/11.3.3@d15ee91-20210525" -lm -lcrypt -m64 gci_hello.c -o gci_hello/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crt1.o: I

Just started working with the uopy python library. I'm able to connect successfully and run all the basic examples provided with no issues, but as soon as I started to extend it out to run some subroutines I've written, I started getting "Subroutine Error [30107] : The subroutine failed to complete successfully". Not entirely sure what would cause this as the same subroutine runs fine when ran outside of uopy. One thing I did notice is if I remove the READV statement within the subroutine, I do not receive this error. Below is the test subroutine I have been using.Any help greatly appreciated. SUBROUTINE (USER,JSON) $INCLUDE UNIVERSE.INCLUDE UDO.H READV USER.NAME FROM INIFILE,USER,3 ELSE NAME = '' STATUS = UDOCreate(UDO_OBJECT, testObj) STATUS = UDOSetProperty(testObj, "userName", USER.NAME) STATUS = UDOWrite(testObj, UDOFORMAT_JSON, TEST) STATUS = UDOFree(testObj) JSON = TEST RETURN​

Subject says it all - I've done some searching, haven't found anything, and like most organizations - we're looking at all of our installed products to assess our vulnerability.We've got instances from 10.3.7 through 11.3.2 installed on various servers.------------------------------Allen EgertonDeveloperSS&C Technologies IncCT US------------------------------

Apache Log4j vulnerability (CVE-2021-44228) - Critical As the Apache Log4j vulnerability (CVE-2021-44228) was disclosed on Dec 09, 2021, your MV teams have been actively monitoring the issue and assessing its impact on the MV products.    The following MV products have been impacted. Product impact and next steps are detailed below.   MV BASIC for VS Code: MV BASIC for VS Code v1.3.0 and prior contains and uses a version of Log4j that can potentially be exploited by this vulnerability.  We have therefore upgraded the Log4j version in MVVS 1.3.2 to v2.16.0 to resolve this issue and advise that you to upgrade by downloading the latest extension on the Visual Studio Code Marketplace.   NOT IMPACTED: The following MV products DO NOT contain any version of Log4j, OR contain a version of Log4j that is not impacted by the vulnerability:   MV Application Servers: UniVerse UniData D3 OpenQM mvBase jBASE   Server Tools: U2 DB Tools U2 Common Clients U2 Toolkit for .NET   Tools: MVX MVIS MVConnec

Are there any Windows GUI applications that can edit Universe DB files on Windows or AIX?------------------------------Phillip PotterV.P. R&DData Management Associates Inc DMACincinnati OH US------------------------------

I am trying to install 11.3.4 to replace 12.1.1 . Wanted to wait for 12.2 but need to test the new performance tool and the exclusive use is causing us problems.But in the installation I get "Unable to execute the uvregen utility" . If I continue it does finish but I cannot authorize the product with the message :error in uvconfig at line 900: FIELD_UPDATE_THRESHOLDWhat is the best course of action at this point?------------------------------Randy NettlingPresidentData Management Associates Inc DMACincinnati OH US------------------------------

Today we announced general availability of a performance monitor tools every business running Rocket UniVerse needs. Rocket MultiValue Experiences: Performance, or MVX:P for short, is the only system monitoring tool providing users with deep insights within Rocket UniVerse. It's is a modern, easy-to-use web-based application with a dashboard consisting of three tiles: Events, Sessions and Locks. MVX:P monitors and escalates more than 20 UniVerse-specific events that could impact performance that are not accessible to the surface monitoring tools available in the market today, and it's free! That said, MVX:P works only with UniVerse 11.3.4, so reach out to us to learn more about upgrading if you are interested.   Check out the MVX product page to learn more, as well as these FAQs. Be sure to share your questions, comments and discoveries here as you jump into the tool. ------------------------------Zain MasterSenior Product ManagerRocket Internal - All BrandsDenver CO US---------------

What's the procedure for Rocket with keeping up with maintenance on Zumasys products?  We had Z maintenance on AccuTerm - as did many of our customers - and those will be coming due soon.

MultiValue Performance Experience version 1.1.1 has been released on December 07 2021 for the below platforms/versions: AIX POWER       7.1,  7.2 CentOS       7,  8 RedHat Enterprise Linux Intel       7,  8 Windows       Windows 10,  2016,  2019 This product is available to order immediately via your Rocket software provider or by logging into your RBC account at https://rbc.rocketsoftware.com or https://rbcint.rocketsoftware.com.Additional product information is available on the Product Availability Matrix at https://rbc.rocketsoftware.com/matrix.asp or https://rbcint.rocketsoftware.com/matrix.asp. For any questions on product availability, please contact u2askus@rocketsoftware.com.

Newbie here.  My name is Glenn and I have primarily worked with standard relational databases.  I have been tasked with extracting the table data from a UniVerse database into a set of CSV files.  I wish I could explain why, but management just gave me this directive, no reason or other details.  I know others in our IT group need to migrate a Windows Server 2003 installation to Win Server 2016 because the data from our StreetSmarts application - contained in the UniVerse DB - needs to still be available after the server migration.  I understand a MVDB doesn't have tables like a relational database, but instead has "files" that contain the data.  I am hoping some of you can give me guidance on how I can extract the file data into CSV files so I can consider this task completed and let management do with it what they will.  Thank you so much for any help you can give me as I don't even understand how I can see the file data or what structure exists for

HiI'm migrating Universe to a new Windows Server. When I perform an UPDATE.ACCOUNT command (to update the account to the installed version of Universe) i'm getting an error 'Unable to write item RELLEVEL" - doing this as admin, and windows permissions has write priv. What have I missed?

I have implemented multiple secure HTTP calls from UniVerse utilizing Security Contexts.  All I need for FedEx is a simple SOAP transmission, which contains the password, authentication, acct#, etc.Which Basic Extension(s) will do this?  Most of what I see in the manuals seem way more complex tan I need for this.------------------------------Nelson SchrothpresidentC3CompleteShop LLCHarrison OH US------------------------------

Hello. Has anyone upgraded from Unidata 7.3.3 to 8.2.1 and saw a large increase in overall system memory usage? Especially in an AIX environment?We upgraded and went from 50 gig of real memory and 16gb of paging, with 1% paging to currently 130gb real memory  and increased paging to 80gb as a precaution after the system ran out of memory the days after the upgrade. We had to add memory and paging space on the fly after the upgrade. We saw smaller increase on 3 other servers, about 50%,  and the server with 990 users, over 850 logged in routinely, we had the extreme memory usage numbers above.Here is our top ten processes currently:ps aux | head -1; ps aux | sort -rn +3 | headUSER PID %CPU %MEM SZ RSS TTY STAT STIME TIME COMMANDjgoelz 64815780 0.0 3.0 3687024 3687040 pts/352 A Aug 12 16:16 udtsfarren 2490806 0.0 1.0 1464620 1464636 pts/278 A Aug 13 6:24 udtrloomis 53412190 0.0 1.0 1021108 1021124 pts/1025 A 06:43:46 7:36 udtkbarbe 55247314 0.0 1.0 679120 679136 pts/870 A 06:19:08 2:07 u

I have been scanning the docs for 11.3 and so far have determined that it is possible to configure the UniRPC services (via the secuconf command ) to support secure TLS connections.What I have not seen is any detail about how to ensure that ONLY secure connections are accepted.Does anyone know if this is currently possible?------------------------------Gregor ScottSoftware ArchitectPentana Solutions Pty LtdMount Waverley VIC Australia------------------------------

Our company uses 2 UniData accounts, one for production (/ud/PRODUCTION) and the other for testing new features (/ud/TEST). Is there a way to configure UniData's python implementation so that it gives preference to python packages based on what account a user is in? For example, I might have a production version of a python file (usefultool.py) with a callable function in it called 'dothistask'.   def dothistask(): print('I did it') return 'useful value' and in a uniBasic program, I could access this function by running VALUE = PyCallFunction('usefultool','dothistask') This package is located in /ud/PRODUCTION/PP. But I want to add a feature or function to this package, but don't want to affect production implementation. So I add this python file to /ud/TEST/PP. Unfortunately, there doesn't seem to be a way to make each account prefer one directory over another when importing a function, so operations in the TEST account continue to favor the package version present in the produ