Rocket® U2 | UniVerse & UniData®

I have some questions / confusion concerning shells. I know that at different companies I have worked they have allowed different shells - korn, bash, bourne, etc.  Is there a standard for invoking each of these shells or is that defined by the admin within each system? !sh, !ksh, !bsh.  Is there any documentation on how to set these up? A way to know which shells are being invoked by the commands?  And a way to update paramaters within each? Thank you for your time, Kathleen------------------------------kathleen hambrickProgrammerRocket Forum Shared Account------------------------------

Have you thought about changing the CENTURY.PIVOT? We've had some customers attempting to report date bugs as we approach 2030 which are in fact not a bug at all but just a misunderstanding of the CENTURY.PIVOT setting. The century pivot point is the year used to determine the century when an ICONV is done on an external date that only provides a 2-digit year. I have attached a results spreadsheet to this post, so that you can review the different results of setting CENTURY.PIVOT against a 2-digit year ICONV and then seeing the result using an OCONV with a 4-digit year. You can check the century pivot point with the CENTURY.PIVOT command at ECL.>CENTURY.PIVOTCentury pivot date is 1930 You can change the century pivot point for your current session with the CENTURY.PIVOT command, or change it for everyone by changing it in system wide configuration file. (udtconfig for UniData and uvconfig for UniVerse ) From the UniData Help The CENTURY.PIVOT ECL command overrides the system-wide ce

Good Day Fellow Members! I have an interesting issue with the "LOGTO" SB+ command.   I am trying to allow a specific Security Group to have access to our TRN.DATA account.  (Our "TRN.DATA" is a our "sandbox" account to allow our power user(s) to test new processes and/or experimenting with setting up our business needs.) Currently, when I ask the user to perform a "/LOGTO TRN.DATA" , they get "TRN.DATA ACCESS DENIED".   (I have added an attachment on what the users are seeing.)    I have tried to add the account to the Security Group through the SB+ Security Group Maintenance, but the updated data is not being saved to the Security Group record. I did ask our Unix administrator to check the permissions and our admin did make adjustment to all user to access the account.  However, this did not resolve the issue. So, my question to the group is what I am missing?  What do I need to look at or investigate? Any suggestions and feedback will be welcomed. Thank you for your time and consider

Greetings!I'm not sure if I can explain this one very well, but I am going to try. We are running UniVerse 11.3.5 on AIX 7.2.  We noticed some oddities when writing to a Type 19 file.At the AIX level, the ownership of the Type 19 file (parent directory) is root, and the group ownership is a group called installs.  UV runs as root. User xyz (group staff) runs a process that writes to the Type 19 file.  If I monitor the contents of the folder at the Unix level with an "ls -l" command, and my timing is perfect, I will see that the UV record (Unix file) first gets created as a 0-byte file with xyz as the owner and staff as the group.  UV then finishes writing the file and at that time the owner is now root with a group of installs.This all happens in milliseconds, so trying to capture it 'at will' is nearly impossible.  I just keep running ls command repeatedly until I see it. I've never noticed this before, but I've never looked before either.  I'm looking now because we have another pro

Hello all - I'm sure this has been asked before but I couldn't find exactly what I was looking for... We are moving our Unidata 8.2 from Unix to Linux. I have been through such a conversion before some 15 years ago but thought others might have more recent recollection and encountered other issues. Is there a list of specific potential pitfalls to check?  Obviously the syntax of Unix commands changes to linux. Spoolers, FTP, emails, etc but what about any Unidata changes? I remember issues with the locate command... did others have that issue also? What other issues did you all find? Thank you in advance for your time, consideration, and assistance. Kathleen------------------------------kathleen hambrickProgrammerRocket Forum Shared Account------------------------------

I keep getting the following error when migrating my UniData application to SB 6.5.7 In /usr/ud/SB.DEFN/DM/_SB.DISP at line 173 can not access unopened file. File variable not used in file operation In /usr/ud/SB.DEFN/DM/_SB.DISP at line 173 Fatal error: WRITE error How do I deal with it? The file is there with the correct permissions but I am not sure what it is referencing at line 173 so I cannot update the respective VOC pointer------------------------------John FigloreRocket Forum Shared Account------------------------------

We currently have a large application written with Universe BASIC and Menus.  is there a way to set a global timeout value for user input?  This is an audit requirement.  ------------------------------Sandy BarrySenior ProgrammerRocket Software Forum Member------------------------------

It's been a while since I had a need to do this. Anyway, I have a process that runs through a file to move data to another system.  I like using the spooler for this since it makes it easy to verify the data. The secondary print will deal with some corresponding multi-values that can be too large to flatten out in the main print job.  Since both are running from the same file it would be nice to be able to print both reports at the same time.  My alternative is to build a sequential file for the 2nd report and copy it to the spooler. Any help with this would be appreciated. ------------------------------Mark Vander VeenIT ManagerUniversity of Chicago PressChicago IL US------------------------------

I just bought a copy of OpenQM to test some of my applications.  My first program to test is a main menu.  In this MVBASIC program I draw a character outline around the border of the screen, the fill in the menu options.  The program then calls a suproutine called XPRMT.  I use the XPRMT subroutine for all keyboard input in all programs, it is the only INPUT statement in my systems.  One of the parameters that I pass to XPRMT is PSTR which is the prompt string which XPRMT prints at @(0,24), the bottom of the screen.  In UniVerse this routine works perfectly, but in OpenQM it was displaying the PSTR value over the bottom line of the border which is row 23.  My last line printed in the menu program was the log off selection at row 22.  After much code changing in XPRMT, I modified the menu program to display the menu selections first and the draw the border and that presented everything properly.  What I see is that even though the XPRMT instruction is "PRINT@(0,24):PSTR;", PSTR is being

Right now my RESTful calls come back as Error 500 unable to connect during a dbpause.  If I turn on the serverdebug I can see in the logfile the message: dbpause is set, try logging in later (or something like that).  I see the same message from telnet logins. Is there a way to capture this message for my Web pages using RESTful calls via an AJAX call?------------------------------David GreenComputer ProgrammerRocket Forum Shared Account------------------------------

Is there an easy way to delete a command from my Unidata command stack, or do I have to end the session and remove it from what was saved under my user profile?------------------------------Shawn Waldieenterprise application developerRocket Forum Shared AccountLos Angeles CA US------------------------------

Currently this is timing out at 60 minutes. Where is this timeout set? Can it be adjusted? Thanks!------------------------------kathleen hambrickProgrammerRocket Forum Shared Account------------------------------

Greeting all! New to Universe so my apologies for the rookie question.  Is there any to determine when the last date/time a program was compiled and by whom?------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

Hi everyone, We're currently evaluating Evoke by BlueFinity as a front-end solution for our MultiValue system and recently had a demo which looked quite promising. The plan is to move forward with it, but before we do, I wanted to check: Has anyone here had hands-on experience with Evoke or mv.NET in a production environment? Any feedback-positive or negative-regarding integration, performance, support, or limitations would be much appreciated. Thanks in advance! Thomas------------------------------Thomas LudwigSystem Builder DeveloperRocket Forum Shared Account------------------------------

Hi, Is anybody aware or know if System Builder 5.1 (pre SB+ I know it's ancient) was ported for a Linux platform (for Unidata)? Thanks.------------------------------Rashid HoosenDeveloperInvestec Bank LimitedSandton ZA------------------------------

What syntax do I need to prompt the user - who runs a program from the terminal - for input, but I don't want it to echo back to the terminal? ------------------------------Shawn Waldieenterprise application developerRocket Forum Shared AccountLos Angeles CA US------------------------------

Hi all Is there a way tu call pip via RUNPY? Usually I do server maintenance and intallations via shell, like this SH-5.1$ /u2/uv/python/bin/python3 -m pip install some_module SH-5.1$ /u2/uv/python/bin/python3 -m pip freeze Of course, it the server is running on windows things are different, so I was wondering if there is some way to interface with pip using the Universe command line, and not the operative system shell. ------------------------------Héctor CortigueraQuiter Servicios Informaticos SL------------------------------

Have you heard about the MV event Rocket is hosting at the Gaylord Rockies Resort & Convention Center in Denver from June 11-13, 2025? Whether you're a business leader or a technical expert, this is a perfect opportunity to explore new possibilities for your Rocket® MultiValue applications.   Why attend? Business and technical tracks: Gain the knowledge you need to focus on business strategy or the technical aspects of application modernization. Networking opportunities: Meet with peers and partners who share your goals and challenges. Hands-on labs and demos: Experience the latest innovations firsthand. Thought leadership panels: Hear from industry experts and learn how other customers are modernizing their Rocket Software applications.See the full agenda Register today------------------------------Mike RajkowskiMultiValue Product EvangelistRocket Internal - All BrandsUS------------------------------

Good morning, folks! I am looking for documentation RE: GUI Notes.  I'm assuming this is a function of AccuTerm.  Can anyone direct me to documentation? As always, I appreciate y'alls helpful replies! ~Doc------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

Hi,I wrapped most of the intercall library for use with javascript and now you can read, write and run subroutines directly from node.You can get the package here:pick-universeDocumentation:Home - DocumentationI also wrote a package to use multivalue style array indices and convert multivalue strings to and from js arrays:pick-mvThese packages are still pretty new and still being worked on, so feel free to open a github issue if you run into anything.------------------------------Nivethan ThiyagarajahProgrammerAsynchron Systems IncToronto ON CA------------------------------

Greeting folks! New to the community.  Interested to know if anyone in this forum is using an outside application for source control? Thanks in advance for your helpful reply/ies! ~Doc------------------------------Doc RuckelPart time programmerRocket Forum Shared Account------------------------------

I have a customer that wants training in UniQuery. I do provide this on occasion, but would not be able to handle this case. I sent him to https://www.rocketsoftware.com/training-and-services He says no one at Rocket has gotten back to him, he submitted an inquiry early March. This is secondhand info, of course. Where should I direct him for help? ------------------------------Elaine LitchfieldElaine Litchfield ConsultingSan Diego CA US------------------------------

IGNORE THIS. CAN'T WORK OUT HOW TO DELETE THE THREAD.

Hey, folks. In UniData, I'm attempting to use SETPTR to change several options. However, this command:SETPTR 0,220,44,2,2,1,"FONTSIZE=9","ORIENTATION=LANDSCAPE","FONT=COURIER"results in only the FONT=COURIER setting being accepted. All other variations of that command result in execution error. Any help would naturally be appreciated.Rich------------------------------Richard LucibellaDirectorRocket Forum Shared Account------------------------------

Hi, I'm having problems with installing UV14 in a RockyLinux:latest container. I'm using the unmodified Compose build from https://github.com/RocketSoftware/multivalue-containers It consistently gives a shared memory violation during installation after the "Installing default Basic Global catalog" message.  Then you get the following in the log when UV attempts to start: Starting UniVerse...UVSMM is started.Starting uvsm...Unirpcd is started.Loading rfsconfig information.Error when attaching shm (0, 268435456, 0), errno=22Couldn't start uvcleanupd daemon.Please check /usr/uv/uvcleanupd.log and /usr/uv/uvcleanupd.errlogUniVerse startup is aborting. Of the versions I've tried, this failure happens for 12.2.1, 14.1 and 14.2.1.beta. UV11.4.1 is okay and consistently gives good installs. Upgrade from 11 -> 14 is also good. I'm taking from comments in this thread that there should be no difference using a container as any other form of virtualisation. Has anyone else had this issue? Chee